Alkyl dimethyl benzyl ammonium chloride (ADBAC) and didecyl dimethyl ammonium chloride (DDAC) are common quaternary ammonium compounds used as disinfectants in households, medical, and restaurant settings. They cause occupational skin and respiratory hazards in humans, and developmental and reproductive toxicity in mice. They also cause increased secretions of proinflammatory cytokines in cell lines and vaginal inflammation in porcine models; but have not been evaluated for developmental immunotoxicity. We assessed immunotoxicity in-vitro with J774A.1 murine macrophage cell line by analyzing cytokine production and phagocytosis; and evaluated developmental immunotoxicity in CD-1 mice by analyzing antibody production. Additionally, because of the associations between gut microbiome dysbiosis and immune disease, we monitored changes in the microbiome as a result of ADBAC+DDAC exposure. Production of cytokines TNF-alpha and IL-6 increased at low ADBAC+DDAC concentrations, and IL-10 decreased in the murine macrophages with ADBAC+DDAC exposure. The phagocytic function of macrophages was also severely decreased. ADBAC+DDAC altered the mouse microbiome by decreasing the relative abundance of Bacteroides and increases in Clostridia in F0 and F1 generations. IgG primary and secondary responses were altered in F1 male mice; and IgA and IgM production were decreased in secondary response in F2 male mice. Since ADBAC+DDAC show signs of immunotoxicity in mice, further studies are needed to reassess risk for human exposure as ADBAC+DDAC may be contributing to immune disease. / Master of Science / Disinfectants are used every day in households, hospitals, and restaurants. Two common ingredients in disinfectants are alkyl dimethyl benzyl ammonium chloride (ADBAC) and didecyl dimethyl ammonium chloride (DDAC). These chemicals can cause asthma and allergic dermatitis in humans. In animals, they cause reduced fertility, altered development, and tissue inflammation. Disinfectant exposure could potentially alter bacterial populations in the gut. Altered microbial populations are associated with many inflammatory diseases. This study evaluated ADBAC and DDAC for their ability to alter immune function and change bacterial populations in the gut. Exposure to ADBAC and DDAC caused inflammation and altered antibody production for two generations. ADBAC and DDAC exposure also significantly altered bacterial communities in the gut. Both changes in the immune function and changes in the gut bacteria could contribute to inflammatory disease. Humans are exposed frequently to ADBAC and DDAC. If these chemicals alter immune function in humans, they could be contributing significantly to human disease.

The effects of ACQ solution parameters such as copper to quat ratio, pH and copper to ligand ratio on distribution of copper complexes in solution and insoluble precipitates, and on fixation and leaching of copper in treated wood were evaluated. The distribution of ionic complexes, predicted by equilibrium speciation model (MINTEQA2), was related to laboratory fixation and leaching results at controlled ACQ solution parameters. A decrease in the relative proportion of copper in the ACQ formulation from a copper oxide (CuO) to didecyldimethylammonium carbonate (DDACb) ratio of 2:1 to 1:1 and 1:2 resulted in lower copper retention in the treated samples and substantially decreased the amount of copper leached per unit area. For monoethanolamine (Mea) based ACQ, solution parameters which favour a higher proportion of monovalent cationic complex, which consume one reactive site in wood, and the presence of insoluble carbonate precipitate of copper in wood during preservative treatment resulted in higher leach resistance compared to the neutral copper complex present at higher pH. Ammonia (NH3) based ACQ can fix more copper at high pH as there is no chelated neutral complex as in Mea based ACQ; however divalent copper-NH3 complexes may consume two sites to fix in wood. Addition of NH3 in Mea based ACQ at Cu:Mea:NH3 ratio of 1:4:6 at pH 10.6 significantly reduced copper leaching compared to 1:4:0 (without ammonia) at pH 9 due to increased divalent copper-ammonia complexes and decreased neutral copper amine complex at elevated pH. Ammonia addition with a lower proportion of Mea (1:2.5:4 at pH 10.5-10.7), significantly reduced copper leaching compared to 1:4:0 at pH 9; no reduction was observed for ammonia addition in ACQ with a higher proportion of Mea (1:4:4 at pH 10.45). The lower copper leaching from 1:2.5:4 resulted from the higher amount of divalent copper-NH3 complexes at higher pH without compromising the amount of copper precipitated at lower pH. The higher percent copper leached from tetramethylethylenediamine (Tmed) based ACQ compared to Mea and NH3 based ACQ suggested that highly stable complexes tend to stay in solution and do not result in leach resistant copper in the wood.

The effects of ACQ solution parameters such as copper to quat ratio, pH and copper to ligand ratio on distribution of copper complexes in solution and insoluble precipitates, and on fixation and leaching of copper in treated wood were evaluated. The distribution of ionic complexes, predicted by equilibrium speciation model (MINTEQA2), was related to laboratory fixation and leaching results at controlled ACQ solution parameters. A decrease in the relative proportion of copper in the ACQ formulation from a copper oxide (CuO) to didecyldimethylammonium carbonate (DDACb) ratio of 2:1 to 1:1 and 1:2 resulted in lower copper retention in the treated samples and substantially decreased the amount of copper leached per unit area. For monoethanolamine (Mea) based ACQ, solution parameters which favour a higher proportion of monovalent cationic complex, which consume one reactive site in wood, and the presence of insoluble carbonate precipitate of copper in wood during preservative treatment resulted in higher leach resistance compared to the neutral copper complex present at higher pH. Ammonia (NH3) based ACQ can fix more copper at high pH as there is no chelated neutral complex as in Mea based ACQ; however divalent copper-NH3 complexes may consume two sites to fix in wood. Addition of NH3 in Mea based ACQ at Cu:Mea:NH3 ratio of 1:4:6 at pH 10.6 significantly reduced copper leaching compared to 1:4:0 (without ammonia) at pH 9 due to increased divalent copper-ammonia complexes and decreased neutral copper amine complex at elevated pH. Ammonia addition with a lower proportion of Mea (1:2.5:4 at pH 10.5-10.7), significantly reduced copper leaching compared to 1:4:0 at pH 9; no reduction was observed for ammonia addition in ACQ with a higher proportion of Mea (1:4:4 at pH 10.45). The lower copper leaching from 1:2.5:4 resulted from the higher amount of divalent copper-NH3 complexes at higher pH without compromising the amount of copper precipitated at lower pH. The higher percent copper leached from tetramethylethylenediamine (Tmed) based ACQ compared to Mea and NH3 based ACQ suggested that highly stable complexes tend to stay in solution and do not result in leach resistant copper in the wood.