Research efforts to determine the causes, effects and locations of mutations within the human genome have been widely pursued due to their role in the development of various diseases. The main cause of mutations in vivo is oxidative damage to DNA via oxidants and free radical species. Numerous studies have been performed in vitro to determine how oxidative damage is induced in DNA. Most of these in vitro studies require photosensitizers to initiate the oxidative damage through various mechanisms. For the purposes of this research, all the photosensitizers that were used initiated oxidative damage in DNA through the electron transfer mechanism. In the charge transport studies, an anthraquinone photosensitizer was covalently linked to the 5 end of DNA by a short carbon tether in order to determine the pattern of damage induced along the length of the DNA. Anthraquinone preferentially damages guanine bases. Our first work sought to determine the effects of charge transport through guanine rich quadruplex DNA dimers. The dimers were formed by the combination of two hairpins with duplex overhangs extending beyond the quadruplex region. This enabled the optimal comparison of the effects of charge transport between duplex and quadruplex DNA structures. Another area of research we pursued in this area was to determine the effects of charge transport in M-DNA (a novel DNA conformation that was reported to form in the presence of zinc ions at a pH above 8). Earlier work on M-DNA suggested that it behaved like a molecular wire. Our research attempted to determine the effects of charge transport on this structure in order to show the behavior of a DNA molecular wire as compared to the standard studies performed in this area on normal B-DNA structures. Lastly, in collaboration with Dr. Ramaiah and colleagues we designed some viologen linked acridine photosensitizers which were tested for any ability to cleave GGG bulges. In preliminary studies, these viologen linked acridine derivatives showed preferential cleavage for guanine bases. They were not covalently bound to DNA, although they could potentially form non covalent interactions with DNA such as intercalation and/or groove binding. Our overall research goal was to determine the extent and overall effect of oxidative damage (using different photosensitizers) on the various DNA structures mentioned above.

Carbon nanotubes possess various unique and interesting properties. They have very high thermal and electrical conductivities, high stiffness, mechanical strength, and optical properties. Due to these properties, CNTs are widely used materials in a variety of fields. It is used for biotechnological and biomedical applications, as chemical and biosensor, in energy storage and field emission transistor. Experimentally synthesized CNTs are generally found in bundle form due to the strong vander Waals (vdW) at-traction between the individual tubes. To use CNTs in real life applications, we often require specific nanotubes with particular characteristics. The nanotube bundle is a mixture of various chirality, diameters and electronic properties (metallic and semiconducting). Only thermal energy is not sufficient to disperse nanotubes from the bundle geometry overcoming the strong vdW attraction between nanotubes. The hydrophobic and insoluble nature of CNTs in the aqueous medium makes the dispersion of CNTs even more difficult. So, it is a big challenge to get single pristine nanotube from the bundle geometry. Many experimental and theoretical studies have addressed the problem of nanotube dispersion from the bundle geometry. Ultrasonic dispersing method is a widely used technique for this purpose where ultrasonic sound is applied to agitate particles in a system. Other methods include using different organic and inorganic solutions, various surfactant molecules, different polymers as dispersing agents. In this study we extend our e orts to develop some better methods and improved dispersing agents. In this thesis, we address the problem of CNT dispersion. To address this issue, we rst give a quantitative estimation of the effective interaction between nanotubes. Next, we introduce different polymers (ssDNA and dendrimers) as external agents and show that they help to overcome the strong adhesive interaction between CNTs and make nanotube dispersion possible from the bundle geometry. For all of the works presented in this thesis, we have used fully atomistic MD simulation and DFT level calculations. We study ssDNA-CNT complex using all-atom MD simulation and calculate various structural quantities to show the stability of ssDNA-CNT complex in aqueous medium. The adsorption of ssDNA bases on CNT surface is driven by - interaction between nucleic bases and CNT. Using the potential of mean forces (PMF) calculation, we study the binding strength of the polynucleotide ssDNA for poly A, T, G, and C with CNT of chirality (6,5). From the PMF calculation, we show the binding sequence to be A > T > C > G. Except for poly G, our result is in good agreement with earlier reported single molecule force spectroscopy results where the sequence of binding interaction was reported to be A > G > T > C. To explore how the interaction between two CNTs mod-i ed in presence of ssDNA between them, we perform PMF calculation between the two ssDNA-wrapped CNTs. The PMF shows the sequence of interaction strength between two ssDNA-wrapped CNTs for different nucleic bases to be T > A > C > G. Thus, from PMF calculations we show the poly T to have the highest dispersion efficiency, which is consistent with earlier reported experimental study. Our PMF calculation shows that poly C and poly G reduce the attraction between two CNTs drastically, whereas poly A and poly T make the interaction fully repulsive in nature. We also present microscopic pictures of the various binding conformations for ssDNA adsorbed on CNT surface. We also study the dendrimer-CNT complex for both the PAMAM and PETIM dendrimers of different generations at various protonation states and present microscopic pictures of the complex. We calculate PMF between two dendrimer wrapped CNTs and show that protonated and higher generations (G3, G4, and so forth) non-protonated PAMAM dendrimers can be used as e ective agents to disperse CNTs from bundle geometry. We also study the chirality dependence of PMF respectively. Finally, we study the interaction of mannose dendrimer with CNTs and show that the wrapping of mannose dendrimer can drive a metal to semiconducting transition in a metallic CNT. We attribute the carbon-carbon bond length assymetry in CNT due to the wrapping of mannose dendrimer as the reason for this band gap opening which leads to metal-semiconductor transition in CNT. Thus, the wrapping of mannose dendrimer on CNT can change its electronic properties and can be used in the band gap engineering of CNT in future nanotechnology. Thus, the works carried out here in this dissertation will help to address the problem of nanotube dispersion from the bundle geometry which will in turn help to use CNT for various applications in diverse fields.

The recent explosion of DNA sequence information has provided compelling evidence for the following facts. (1) Simple repetitive sequences-microsatellites and minisatellites occur commonly in the human genome and (2) these repetitive DNA sequences could play an important role in the regulation of various genetic processes including modulation of gene expression. These sequences exhibit extensive polymorphism in both length and the composition between species and between organisms of the same species and even cells of the same organism. The repetitive DNA sequences also exhibit structural polymorphism depending on the sequence composition. The functional significance of repetitive DNA is a well-established fact. The work done in many laboratories including ours has conclusively documented the functional role played by repetitive sequences in various cellular processes. Structural studies have established the sequence requirement for various non-B DNA structures and the functional significance of these unusual DNA structures is becoming increasingly clear. The structures that were characterised earlier purely from conformation point of view have aroused interest after the recent realisation that these structures could be formed in vivo when cloned in a supercoiled plasmid. The discovery of novel type of dynamic mutations where intragenic amplifications of trinucleotide repeats is associated with phenotypic changes causing many neurodegenerative disorders has provided the most compelling evidence for the importance of simple repeats in the etiology of these disorders. Secondary structures adopted by these simple repeats is a common causative factor in the mechanism of expansion of these repeats. This realisation prompted many investigations into the relationship between the DNA sequence, structure and molecular basis of dynamic mutation. Many experimental evidences have implicated paranemic DNA structures in various biological processes, especially in the regulation of gene expression. Earlier work done in our laboratory on the structure function relationship of repetitive DNA sequences provided experimental evidence for the role of paranemic DNA structure in the regulation of gene expression. It was demonstrated that intramolecular triplex potential sequences within a gene downregulate its expression in vivo (Sarkar and Brahmachari (1992) Nucleic Acids Res., 20, 5713-5718). Similarly the effect of cruciform structure forming sequences on gene expression was also documented. Sequence specific alterations in DNA structures were studied in our laboratory using a variety of biophysical and biochemical techniques. An intramolecular, antiparallel tetraplex structure was proposed for human telomeric repeat sequences (Balagurumoorthy, et al., (1994) J. Biol. Chem., 269, 21858-21869). The telomeric repeats are not only present at the end of chromosomes but they are also present at many interstitial sites in the human genome. Database search reveals that the human telomeric sequences as well as similar sequences with minor variations are present at many locations in the human genome. Telomeric repeats are GC rich sequences with the G rich strand protruding as a 3' end overhang at the end of chromosomes. When human telomeric repeats are cloned in a supercoiled plasmid, the C rich strand adopts a hairpin like conformation where as the G-rich strand extrudes into a quadruplex structure. However, the biological significance of these structures in vivo still remains to be elucidated completely. The role of a putative tetraplex DNA structure in the insulin gene linked polymorphic region of the human insulin gene in vivo in the regulation of expression of the insulin gene has been suggested. In this context, we have addressed the question whether the telomeric repeats when present within a gene affect its expression in vivol If so, what would be the possible mechanism? An attempt has been made to understand the effect of presence of telomeric repeats within a gene on its expression. The details of these studies have been presented in Chapter 2 of this thesis. Contrary to telomeric repeats which provide stability to the chromosomes, recently expansion of a GC rich dodecamer repeat upstream of cystatin B gene (chromosome 21q) has been shown to be the most common mutation associated with Progressive Myoclonus Epilepsy (EPM1) of Unverricht-Lundberg type. Two to three copies of the repeat (CCCCGCCCCGCG)n are present in normal individuals whereas the affected individuals have 30-75 copies of this repeat. The expression of cystatin B gene is reduced in patients in a cell specific manner. The repeat also shows intergenerational variability. The exact mechanism of expansion of this repeat is not known. In the case of trinucleotide repeat expansion, it is shown that the structure adopted by the repeat plays an important role in the mechanism of expansion and that some of the secondary structures adopted by trinucleotide repeats could be inherently mutagenic conformations. In order to understand the mechanism of expansion EPM1 dodecamer repeat, the work reported in this thesis was carried out with the following objectives. • To understand the structure of G rich and C-rich strands of EPM1 repeat. • To understand the variations in the structure with the increase in the length and its possible implications in the mechanism of expansion of EPM 1 repeat. Studies aimed with these objectives are presented in chapters 3, 4 and 5 of the thesis. Chapter 1 provides a general introduction to repetitive DNA, the various structures adopted by repetitive DNA sequences in the genome, the functional significance of the various simple repetitive DNA sequences in the genome has been presented. An account of trinucleotide repeat expansion and associated disorders, non-trinucleotide repeat expansions and associated disorders has been presented. The various non B-DNA structures adopted these repeats and their implications in the mechanism of expansion have been discussed. Chapter 2 describes in frame cloning of human telomeric repeats d(G3T2A)3G3 in the N-terminal region of β-galactosidase gene. The effect of such repeat Sequences on transcription elongation in vivo has been studied using E.coli as a model system. The 3.5 copies of human telomeric repeat sequences were cloned in the sense strand of plasmid pBluescriptllSK+ so as to create plasmid clone pSBQ8 and in the template strand of plasmid pBluescriptHKS+ so as to create clone pSBRQ8. One dimensional chloroquine gel shift assay indicated presence of an unwound structure in pSBQ8 and pSBRQ8. β-galactosidase activity assay suggested downregulation of the gene in vivo. In the case of plasmid pSBQ8 the difference in β-galactosidase activity was approximately 6 fold as compared to the parent plasmid pBluescriptIISK+ whereas in the case of pSBRQ8 the difference in β-galactosidase activity was approximately 8 fold as compared to the control pBluescriptIIKS+. The analysis of β-galactosidase transcript showed that full length transcript was formed in the case of pSBQ8. Full length transcript was not formed in the case of pSBRQ8. We propose that in the case of pSBQ8 the gene expression is inhibited in steps subsequent to transcription elongation. In the case of pSBRQ8, we propose that quadruplex structure may be formed by the template strand at the DNA level thereby blocking transcription elongation step. Chapter 3 describes studies aimed at understanding the structure of G-rich strand (referred to as G strand) of Progressive Myoclonus Epilepsy (EPM1) repeat. The sequence of the G strand of dodecamer EPM1 repeat is d(GGGGCGGGGCGC)n. Oligoucleotides containing one (12mer), two (24mer) and three(36mer) were synthesised. These oligonucleotides are referred to as dG12, dG24 and dG36 respectively. Structural studies were carried out using CD spectroscopy, UV melting, non-denaturing gel electrophoresis and chemical and enzymatic probing. The G strand oligonucleotides showed enhanced gel elecrophoretic mobility in the presence of monovalent cations KCl and NaCl. Oligonucleotide dG12 also showed retarded species on non-denaturing gel in the presence of 70mM KCl indicating intermolecular associations. Oligonucleotides dG24 and dG36 predominantly formed intramolecular structures which migrated anomalously faster than the expected size. The CD spectrum for dG12 showed an intense positive band at 260nm and a negative band at 240nm in the presence of KCl indicative of an intermolecular, parallel G quartet structure. The CD spectra of dG24 and dG36 showed 260nm positive peak, 240nm negative peak along with a positive band around 290nm. This is indicative of folded back structure. These findings support the results of non-denaturing gel electrophoresis of G strand oligonucleotides. The UV melting profiles suggested increase in the stability with the increase in the length. These structures were further characterised by PI nuclease and chemical probing using DMS and DEPC. The structural studies with G-rich strand of EPM1 dodecamer repeat showed that this repeat motif adopts intramolecularly folded structures with increase in the length of the repeat thereby favouring slippage during replication. Chapter 4 deals with the studies aimed at understanding the structure at acidic pH of C-rich strand (referred to as C strand) of Progressive Myoclonus Epilepsy (EPM1) repeat. The sequence of the C strand of dodecamer EPM1 repeat is d(CCCCGCCCCGCG)n. The C rich oligonucleotides are known to form a four stranded structure called i-motif at acidic pH involving intercalated base pairs. The i-motif consists of two parallel stranded, base paired duplexes are arranged in an antiparallel orientation. Since, the base pairs of one base paired duplex intercalate into those of the other duplex, the structure is called as i-motif. We have investigated structure of C strand of EPM1 repeat by circular dichroism (CD), native polyacrylamide gel electrophoresis and UV melting. Oligonucleotide dC12 showed two bands of which the major band was retarded on the native gel (pH 5.0) at low temperature suggesting that dC12 predominantly formed intermolecular structure, Oligonucleotides dC24 and dC36 migrated anomalously faster than the expected size indicating formation of compact, intramolecularly folded structures. Circular dichroism studies indicate that, all the oligonucleotides displayed an intense positive band near 285nm, a negative band around 260nm with a cross over at 270nm, This is a characteristic CD signature for an i-motif structure and reflects the presence of secondary structure due to formation of hydrogen bonded pairs between protonated cytosines. All the C strand oligonucleotides showed hyperchromism at 265nm, which is an isobestic wavelength for C protonation. Studies described in this chapter suggest an intramolecular i-motif structure for dC24 and dC36 and an intermolecular i-motif for oligonucleotide dC12. In addition, it was interesting to note that inspite of the presence of G residues, the stretch of C residues could adopt i-motif structure. Although these structures are formed at an acidic pH, it is indicative of formation of possible intramolecularly folded structure. Many reports have suggested the possibility of cytosine rich sequences adopting i-motif structure even at neutral pH. In order to test this possibility, structural studies were carried out on the C strand EPM1 oligonucleotides at pH 7.2 in the presence of 70mM NaCl. These studies have been described in Chapter 5. The investigations were done using CD spectroscopy, UV melting, native polyacrylamide gel electrophoresis, and chemical probing using hydroxylamine and PI nuclease. These studies indicate that all the C strand oligonucleotides form intramolecular, hairpin structure at physiological pH. All the three C strand oligonucleotides migrated anomalously faster on the native gel indicating the presence of a compact structure. The CD spectra at pH 7.2 showed a blue shift as compared to those at pH 5.0. This indicated absence of base pairs. The hydroxylamine chemical probing suggested presence of G-C Watson-Crick base pairs. The loop residues of the folded back hairpin structures were probed with PI nuclease. The C strand oligonucleotides showed possibility of formation of multiple hairpin structures with the increase in the length of the repeat. The propensity to form hairpin structures suggests a possibility of formation of slip loop structures during the replication process thereby promoting expansion of this repeat. Formation of folded back hairpin like structures is significant in terms of mechanism of expansion of this repeat. Chapter 6 is devoted to concluding remarks highlighting the significance of the experimental results presented in this thesis and their possible biological implications in the light of contemporary research.

No description available.

Promoter region is the key regulatory region, which enables the gene to be transcribed or repressed by anchoring RNA polymerase and other transcription factors, but it is difficult to determine experimentally. Hence an in silico identification of promoters is crucial in order to guide experimental work and to pin point the key region that controls the transcription initiation of a gene. Analysis of various genome sequences in the vicinity of experimentally identified transcription start sites (TSSs) in prokaryotic as well as eukaryotic genomes had earlier indicated that they have several structural features in common, such as lower stability, higher curvature and less bendability, when compared with their neighboring regions. In this thesis work, the variation observed for these DNA sequence dependent structural properties have been used to identify and delineate promoter regions from other genomic regions. Since the number of bacterial genomes being sequenced is increasing very rapidly, it is crucial to have procedures for rapid and reliable annotation of their functional elements such as promoter regions, which control the expression of each gene or each transcription unit of the genome. The thesis work addresses this requirement and presents step by step protocols followed to get a generic method for promoter prediction that can be applicable across organisms. The each paragraph below gives an overall idea about the thesis organization into chapters. An overview of prokaryotic transcriptional regulation, structural polymorphism adapted by DNA molecule and its impact on transcriptional regulation has been discussed in introduction chapter of this thesis (chapter 1). Standardization of promoter prediction methodology - Part I Based on the difference in stability between neighboring upstream and downstream regions in the vicinity of experimentally determined transcription start sites, a promoter prediction algorithm has been developed to identify prokaryotic promoter sequences in whole genomes. The average free energy (E) over known promoter sequences and the difference (D) between E and the average free energy over the random sequence generated using the downstream region of known TSS (REav) are used to search for promoters in the genomic sequences. Using these cutoff values to predict promoter regions across entire E. coli genome, a reliability of 70% has been achieved, when the predicted promoters were cross verified against the 960 transcription start sites (TSSs) listed in the Ecocyc database. Reliable promoter prediction is obtained when these genome specific threshold values were used to search for promoters in the whole E. coli genome sequence. Annotation of the whole E. coli genome for promoter region has been carried out with 49% accuracy. Reference Rangannan, V. and Bansal, M. (2007) Identification and annotation of promoter regions inmicrobial genome sequences on the basis of DNA stability. J Biosci, 32, 851-862. Standardization of promoter prediction methodology - Part II In this chapter, it has been demonstrated that while the promoter regions are in general less stable than the flanking regions, their average free energy varies depending on the GC composition of the flanking genomic sequence. Therefore, a set of free energy threshold values (TSS based threshold values), from the genomic DNA with varying GC content in the vicinity of experimentally identified TSSs have been obtained. These threshold values have been used as generic criteria for predicting promoter regions in E. coli and B. subtilis and M. tuberculosis genomes, using an in-house developed tool ‘PromPredict’. On applying it to predict promoter regions corresponding to the 1144 and 612 experimentally validated TSSs in E. coli (genome %GC : 50.8) and B. subtilis (genome %GC : 43.5) sensitivity of 99% and 95% and precision values of 58% and 60%, respectively, were achieved. For the limited data set of 81 TSSs available for M. tuberculosis (65.6% GC) a sensitivity of 100% and precision of 49% was obtained. Reference Rangannan, V. and Bansal, M. (2009) Relative stability of DNA as a generic criterion for promoter prediction: whole genome annotation of microbial genomes with varying nucleotide base composition. Mol Biosyst, 5, 1758 - 1769. Standardization of promoter prediction methodology - Part III In this chapter, the promoter prediction algorithm and the threshold values have been improved to predict promoter regions on a large scale over 913 microbial genome sequences. The average free energy (AFE) values for the promoter regions as well as their downstream regions are found to differ, depending on their GC content even with respect to translation start sites (TLSs) from 913 microbial genomes. The TSS based cut-off values derived in chapter 3 do not have cut-off values for both extremes of GC-bins at 5% interval. Hence, threshold values have been derived from a subset of translation start sites (TLSs) from all microbial genomes which were categorized based on their GC-content. Interestingly the cut-off values derived with respect to TSS data set (chapter 3) and TLS data set are very similar for the in-between GC-bins. Therefore, TSS based cut-off values derived in chapter 2 with the TLS based cut-off values have been combined (denoted as TSS-TLS based cutoff values) to predict promoters over the complete genome sequences. An average recall value of 72% (which indicates the percentage of protein and RNA coding genes with predicted promoter regions assigned to them) and precision of 56% is achieved over the 913 microbial genome dataset. These predicted promoter regions have been given a reliability level (low, medium, high, very high and highest) based on the difference in its relative average free energy, which can help the users design their experiments with more confidence by using the predictions with higher reliability levels. Reference Rangannan, V. and Bansal, M. (2010) High Quality Annotation of Promoter Regions for 913 Bacterial Genomes. Bioinformatics, 26, 3043-3050. Web applications PromBase : The predicted promoter regions for 913 microbial genomes were deposited into a public domain database called, PromBase which can serve as a valuable resource for comparative genomics study for their general genomic features and also help the experimentalist to rapidly access the annotation of the promoter regions in any given genome. This database is freely accessible for the users via the World Wide Web http://nucleix.mbu.iisc.ernet.in/prombase/. EcoProm : EcoProm is a database that can identify and display the potential promoter regions corresponding to EcoCyc annotated TSS and genes. Also displays predictions for whole genomic sequence of E. coli and EcoProm is available at http://nucleix.mbu.iisc.ernet.in/ecoprom/index.htm. PromPredict : The generic promoter prediction methodology described in previous chapters has been implemented in to an algorithm ‘PromPredict’ and available at http://nucleix.mbu.iisc.ernet.in/prompredict/prompredict.html. Analysing the DNA structural characteristic of prokaryotic promoter sequences for their predominance Sequence dependent structural properties and their variation in genomic DNA are important in controlling several crucial processes such as transcription, replication, recombination and chromatin compaction. In this chapter 6, quantitative analysis of sequences motifs as well as sequence dependent structural properties, such as curvature, bendability and stability in the upstream region of TSS and TLS from E. coli, B. subtilis and M. tuberculosis has been carried out in order to assess their predictive power for promoter regions. Also the correlation between these structural properties and GC-content has been investigated. Our results have shown that AFE values (stability) gives finer discrimination rather than %GC in identifying promoter regions and stability have shown to be the better structural property in delineating promoter regions from non-promoter regions. Analysis of these DNA structural properties has been carried out in human promoter sequences and observed to be correlating with the inactivation status of the X-linked genes in human genome. Since, it is deviating from the theme of main thesis; this chapter has been included as appendix A to the main thesis. General conclusion Stability is the ubiquitous DNA structural property seen in promoter regions. Stability shows finer discrimination for promoter prediction rather than directly using %GC-content. Based on relative stability of DNA, a generic promoter prediction algorithm has been developed and implemented to predict promoter regions on a large scale over 913 microbial genome sequences. The analysis of the predicted regions across organisms showed highly reliable predictive performance of the algorithm.

Confocal single-molecule fluorescence is a powerful tool for monitoring conformational dynamics, and has provided new insight into the enzymatic activities of complex biological molecules such as DNA and RNA polymerases. Though useful, such studies are typically qualitative in nature, and performed almost exclusively in highly purified, in vitro settings. In this work, I focus on improving the methodology of confocal single-molecule fluorescence in two broad ways: (i) by enabling the quantitative identification of molecular dynamics in proteins and nucleic acids in vitro, and (ii) developing the tools needed to perform these analyses in vivo. Toward the first goal, and together with several colleagues, I have developed three novel methods for the quantitative identification of dynamics in biomolecules: (i) Burst Variance Analysis (BVA), which unambiguously identifies dynamics in single-molecule FRET experiments; (ii) Dynamic Probability Density Analysis (PDA), which hypothesis-tests specific kinetic models against smFRET data and extracts rate information; and (iii) a novel molecular counting method useful for studying single-molecule thermodynamics. We validated these methods against Monte Carlo simulations and experimental DNA controls, and demonstrated their practical application in vitro by analyzing the “fingers-closing” conformational change in E.coli DNA Polymerase I; these studies identified unexpected conformational flexibility which may be important to the fidelity of DNA synthesis. To enable similar studies in the context of a living cell, we generated a nuclease-resistant DNA analogue of the Green Fluorescent Protein, or “Green Fluorescent DNA,” and developed an electroporation method to efficiently transfer it into the cytoplasm of E.coli. We demonstrate in vivo confocal detection of smFRET from this construct, which is both bright and photostable in the cellular milieu. In combination with PDA, BVA and our novel molecular counting method, this Green Fluorescent DNA should enable the characterization of DNA and protein-DNA dynamics in living cells, at the single-molecule level. I conclude by discussing the ways in which these methods may be useful in investigating the dynamics of processes such as transcription, translation and recombination, both in vitro and in vivo.