No description available.

International Telemetering Conference Proceedings / October 30-November 02, 1995 / Riviera Hotel, Las Vegas, Nevada / Half inch Super VHS (S-VHS) tape is an exceptional media for recording telemetry instrumentation data. Due to high volume mass production for the commercial and industrial video markets, high quality S-VHS media is available at a low cost. Advances in head technology as well as data path electronics contribute to increased data densities recorded on this media. Present system capabilities of 50,000 bits per inch will soon be replaced with newer technology systems that will record at linear densities up to 100,000 bits per inch.

International Telemetering Conference Proceedings / October 25-28, 1993 / Riviera Hotel and Convention Center, Las Vegas, Nevada / The increasing availability of powerful yet relatively inexpensive data acquisition and processing techniques has precipitated a radical reappraisal of the methods used to capture, manipulate and store data of all kinds. Some of the recently introduced recording systems can be used both for fast data capture and for high capacity archival/back-up applications - effectively bridging a long-standing divide between these two formerly diverse aspects of data recording and processing. This paper offers a brief overview of a new technology known as micro-track recording, and suggests ways in which system designers and integrators may take full advantage of its important new facilities and features.

International Telemetering Conference Proceedings / October 26-29, 1992 / Town and Country Hotel and Convention Center, San Diego, California / The world of instrumentation data recording has traditionally been concerned with recorder performance in terms of bandwidth, data rate, tape speed and recording time, with the apparently unceasing trend to record more and more data. However, while this may remain a valid perspective for data acquisition, the increasing requirement to integrate equipment into computer based environments has resulted in the need for greater emphasis to be applied to such parameters as data control and interfacing when specifying digital data recording systems. This paper addresses these operational issues and describes the practical implementation of a computer friendly digital cassette recorder which provides a common platform for both high rate data acquisition and computer based data analysis.

International Telemetering Conference Proceedings / October 30-November 02, 1989 / Town & Country Hotel & Convention Center, San Diego, California / In order to satisfy future instrumentation data recording requirements, the availability of high data rate recorders with long record times is most desirable. Also, assurance of commonality amongst the many users of these data requires that any system designed be compatible across the user data base. Hence, the American National Standards Institute (ANSI) has developed a tape format standard that will assure commonality and exchange of data in an acceptable manner. This standard also establishes data rate recording requirements using a commercially available media in cassette form that will satisfy the operational need. DATATAPE is developing a recorder system that will meet the ANSI requirements of the data format on tape, as well as the data rate and record times implied by the standard. This paper discusses the development of the tape format standard and the design of the system that will fully comply with the standard. Test data will be presented to verify system capabilities. Additionally, DATATAPE's progress in developing a system that will comply with the similar Department of Defense (DOD) tape format Standard, MIL-STD- 2179, will be presented, along with a summary of DOD programs that require MIL-STD-2179 compliant recorder systems.

International Telemetering Conference Proceedings / October 30-November 02, 1989 / Town & Country Hotel & Convention Center, San Diego, California / In order to satisfy future instrumentation data recording requirements, the availability of high data rate recorders with long record times is most desirable. Also, assurance of commonality amongst the many users of these data requires that any system designed be compatible across the user data base. Hence, the American National Standards Institute (ANSI) has developed a tape format standard that will assure commonality and exchange of data in an acceptable manner. This standard also establishes data rate recording requirements using a commercially available media in cassette form that will satisfy the operational need. DATATAPE is developing a recorder system that will meet the ANSI requirements of the data format on tape, as well as the data rate and record times implied by the standard. This paper discusses the development of the tape format standard and the design of the system that will fully comply with the standard. Test data will be presented to verify system capabilities. Additionally, DATATAPE’s progress in developing a system that will comply with the similar Department of Defense (DOD) tape format Standard, MIL-STD2179, will be presented, along with a summary of DOD programs that require MIL-STD-2179 compliant recorder systems.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / The strip-chart recorder has evolved from a simple pen-writing instrument to an instrumentation platform. Today's Telemetry Recording Workstations not only provide a permanent hard copy of telemetry data, but also offer high resolution videographic displays with real-time point-of-writing representation, the ability to efficiently store data digitally, and customizable user interfaces. Host control and digital data transfer can be achieved using Ethernet networks, making the instrument an integral part of a telemetry system. The Telemetry Recording Workstation is a fundamental instrument for any telemetry application or installation, due to its abilities to display, print and store real-time data.

International Telemetering Conference Proceedings / October 20-23, 2003 / Riviera Hotel and Convention Center, Las Vegas, Nevada / Telemetry recorders have historically been used as standalone systems with each user responsible for operation and data interpretation on that system. Utilizing the latest peerto- peer networking technologies, telemetry recorders can now be linked to provide instantaneous communication between systems. This fully distributed, network-based architecture can be used for command and control of multiple recorders, as well as message passing between them. A centralized server is no longer required, resulting in considerable logistical and cost savings. The peer-to-peer communication topology can efficiently connect telemetry recorder “islands of information”.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / NATO NAFAG Air Group IV (AG IV) established the NATO Advanced Data Storage Technical Support Team (NADS TST) to investigate the technology and to develop an interface Standardization Agreement (STANAG) for recording, storage, and exchange of imagery data. Government agencies and industry involved in these technologies are participating in this effort.

International Telemetering Conference Proceedings / November 04-07, 1991 / Riviera Hotel and Convention Center, Las Vegas, Nevada / Recorders conforming to IRIG Standards have served the data recording community well for many years. Initially, most systems were analog in nature, recording data in either direct or FM modes but as the need for digital recording developed, the IRIG recorder was successfully adapted for this purpose by the addition of formatting and coding sub-systems to form the High Density Digital Recorder (HDDR). Today, user requirements for higher speed, higher capacity and more convenient systems have presented equipment designers with new challenges in terms of the correct choice of technology and system architecture. It is not surprising that system designers should turn for inspiration first to the very high speed transverse and helical products which had been developed for the broadcast industry since these technologies possess many of the attributes necessary for a high rate digital data recorder. It is unfortunate that it has now become a truism that the only logical progression from the longitudinal IRIG system is by means of rotary technology. Recent developments in a technology known as micro-track recording now call this assumption into question. Recording systems based on micro-track technology are available and others are in an advanced state of development, and these offer a costeffective, attractive and low risk alternative to rotary systems for both high rate data capture and tape mass storage applications.