International Telemetering Conference Proceedings / November 04-07, 1991 / Riviera Hotel and Convention Center, Las Vegas, Nevada / A synopsis of the very recent evolution of telemetry chart recorders from “closed” chart paper output devices to powerful “open” Data Management Systems. A Data Management System (DMS) is defined as one which incorporates a video screen for waveform preview and monitoring, direct connection of hard or optical disk via SCSI for real-time data archiving, and DR11 digital interfacing. The DMS concept of providing real-time waveform monitoring independent of hard copy recording is discussed, as well as the capabilities of the hard copy recorder. The realities of budget shortfalls makes wholesale system upgrades to eliminate DAC’s entirely difficult at best. These concerns—and a potential remedy: a DMS which accepts any mix of analog and digital waveforms—are reviewed. Objectives: How DMS’s can be integrated with existing telemetry systems, encompass the functionality of conventional recorders and add new capabilities, with an emphasis on how data can be digitally pre-formatted in real-time, simplifying—or even eliminating—post-mission reduction and analysis. A demonstration of how a video display allows real-time trace viewing—a major weakness of conventional thermal array recorders.

The seismic method in exploration geophysics consists of creating a mechanical disturbance at or close to the surface of the earth, and observing its effects at a number of chosen locations along the surface. The purpose of seismic data acquisition is to record these effects in such a manner that their relation with the initial disturbance can be interpreted as a guide to the earth's subsurface structure (Nettleton, 1940).The validity of data interpretation depends upon the fidelity of recording. A better seismic interpretation can result from correctly collected data using instrumentation which faithfully records the seismic signal. Subsequent computer processing cannot reconstruct information which is not contained in the recorded field data. Hence, the quality of field data recording must be at an optimum level, otherwise the result will be an inferior interpretation (Donnell,1957).A reflection seismic data acquisition system was assembled and put into operation. The basic instrument was a Texas Instruments DFS IV, obtained from marine vessel M/V Banksia, and commissioned for land application.The system was tested and evaluated. The instrument analog filter phase distortion was studied in detail. The study indicated that phase distortion can be a major cause of seismic misties. Without a knowledge of the particular recording instrumentation filter transfer function, data processing bureaux may not compensate for phase distortion effects adequately (Gray et al., 1968).Once testing was completed satisfactorily, the operational system was applied to several practical field situations of commercial standard. A series of noise studies was performed to evaluate not only source generated noise, but also to study the effect of different types of energy sources on seismic data. In addition, two multi-fold seismic lines wore recorded, both of which were considered superior ++ / to those previously produced by the industry, at each location (Jacia, pers. comm., 1984).Finally, a single fold three-dimensional areal seismic survey was performed over the Woodada gas field. The results of this survey will be released after processing has been completed by Allied Geophysical Laboratories (University of Houston), and are not contained in this thesis.Future areas for field application are discussed. Recommendations are made for further research work in the area of phase distortion; the examination of different energy sources; a review of receiver properties and horizontally travelling seismic waves; a bore-hole seismic study and finally, a fourth-dimensional recording technique involving the performance of an offset VSP survey at the same time as an areal 3-D seismic survey.Volume 1 describes the establishment of the acquisition system and its subsequent field application.Volume 2 contains the Appendix of instrument tests and their analysis.

ITC/USA 2009 Conference Proceedings / The Forty-Fifth Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2009 / Riviera Hotel & Convention Center, Las Vegas, Nevada / Telemetry data recorders are not immune to the effects that a number of disruptive technologies have had on the telemetry industry. Data recorder designs today make use of data buses, storage types and graphical user interfaces that are constantly evolving based on the advances of personal computer and consumer electronics technologies. Many of these recorders use embedded designs that integrate disruptive technologies such as PCI Express for realtime data and signal processing, SATA interfaces for data storage and touchscreen technologies to provide an intuitive operator interface. Solid state drives also play a larger role in the latest recorder designs. This paper will explore the effects of these technologies on the latest telemetry recorders in terms of the benefits to the users, cost of implementation, obsolescence management, and integration considerations. The implications of early adoption of disruptive technologies will also be reviewed.

International Telemetering Conference Proceedings / October 26-29, 1992 / Town and Country Hotel and Convention Center, San Diego, California / In recent years, many designers have turned to digital techniques as a means of improving the fidelity of instrumentation data recorders. However, single and multi-channel recorders based on professional VHS transports are now available which use innovative methods for achieving near-perfect timebase accuracy, inter-channel timing and group delay specifications for long-duration wideband analog recording applications. This paper discusses some of the interesting technical problems involved and demonstrates that VHS cassette recorders are now a convenient and low cost proposition for high precision multi-channel wideband data recording.

International Telemetering Conference Proceedings / October 25-28, 1999 / Riviera Hotel and Convention Center, Las Vegas, Nevada / The ultra high capacity disk-based data recorders now entering service offer not just a convenient and inexpensive alternative to conventional tape systems for applications like Telemetry and Flight Test but also a unique opportunity to rethink the classical models for data capture, analysis and storage. Based on ‘open architecture’ interface standards- typically SCSI-this new generation of products represents an entirely new approach to the way data is handled. But the techniques they employ are equally applicable to any SCSI storage device. This Paper discusses a range of practical scenarios illustrating how it is now possible to `mix-and-match’ recording technologies at will-disk-array, DLT, DTF, ExaByte, JAZ, ZIP, DVD, etc.- to produce an almost infinite combination of readily scaleable plug-and-play data capture, analysis and archiving solutions. The cost and reliability benefits arising from the use of standard mass-produced storage sub-systems are also considered

International Telemetering Conference Proceedings / October 30-November 02, 1995 / Riviera Hotel, Las Vegas, Nevada / Magnetic tape is the primary medium used to capture and store unprocessed data from remote sensing satellites. Recent advances in digital cassette recording technology have resulted in the introduction of a range of data recorders which are equally at home working alongside conventional recorders or as part of more advanced data capture strategies. This paper shows how users are taking advantage of the convenience, economy and efficiency of this new generation of cassette-based equipment in a range of practical applications.

International Telemetering Conference Proceedings / October 26-29, 1998 / Town & Country Resort Hotel and Convention Center, San Diego, California / As the performance of inexpensive commercial off-the-shelf (COTS) data storage devices continues to increase, the temptation to use them as the basis for data capture products for military and industrial applications becomes ever more compelling. For example, the Digital Linear Tape (DLT) format now offers a 270 Gigabits per cassette capacity at a sustained transfer rate of 40 Mbits/s – performance which would have cost tens or even hundreds of thousands of dollars per system just a few years ago. But to transplant such a device from its benign office habitat into a data capture product which will function reliably and consistently in a wide range of field and platform environments is an engineering task fully as difficult and complex as designing an environmentally robust recorder from scratch. This paper discusses the problems which typically have to be overcome; environmental protection, reliability, data integrity, power supplies, software issues, control and data interfacing, etc., citing practical examples of analog and digital DLT-based data recorders which are now entering service for telemetry, intelligence gathering, anti-submarine warfare and related applications

This study investigated the effects of verbal and graphic feedback alone and in combination with praise on the data-recording behavior of 12 direct care trainers (DCTs) who recorded their reinforcer deliveries as they interacted with mentally retarded clients. An additional variable examined was the effect of time of delivering feedback on subsequent data-recording behavior. Feedback was delivered by the experimenter. Correspondence checks were conducted and a three-phase multiple condition experimental design was used. All feedback conditions produced an observable difference in DCT data-recording behavior. Time of delivery of feedback also appeared to have an effect on the amount of data recorded by DCTs.

Flight data recorders (FDRs) play a critical role in determining root causes of aviation mishaps. Some aircraft record limited amounts of information during flight (e.g. T-1A Jayhawk), while others have no FDR on board (B-52 Stratofortress). This study explores the use of image-based flight data acquisition to overcome a lack of available digitally-recorded FDR data. In this work, images of cockpit gauges were unwrapped vertically, and 2-D cross-correlation was performed on each image of the unwrapped gauge versus a template of the unwrapped gauge needle. Points of high correlation between the unwrapped gauge and needle template were used to locate the gauge needle, and interpolation and extrapolation were performed (based on locations of gauge tick marks) to quantify the value to which the gauge needle pointed. Results suggest that image-based flight data acquisition could provide key support to mishap investigations when aircraft lack sufficient FDR data.

Approved for public release, distribution is unlimited / Test and evaluation of system performance has been a critical part of the acceptance of combat weapon systems for the Department of Defense. As combat weapon systems have become more complex, evaluation of system performance has relied more heavily on recorded test data. As part of the on-going transformation of the Defense department, Commercial-Off- The-Shelf (COTS) technology is being integrated into the acquisition of combat weapon systems. An Analysis Control Board (ACB) was created in response to these factors to support the AEGIS Weapon System Program Office. The focus of this ACB was to investigate and provide potential solutions to Data Dictionary, Data Recording and Data Reduction (R2D2) issues to the AEGIS Program Manager. This thesis discusses the history of the R2D2 ACB and its past, present and future directions. Additionally, this thesis examines how the R2D2 ACB concept could be applied to the DD(X) Next Generation Destroyer program. / Civilian, United States Navy