Thesis (doctoral)--Rijksuniversiteit te Utrecht. / "Appendix" (p. 45-76) inserted in pocket at end.

Orientador: Eduardo Hebling / Dissertação (mestrado profissional) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba / Made available in DSpace on 2018-08-18T23:12:40Z (GMT). No. of bitstreams: 1 Trentin_ElcioFerreira_M.pdf: 1203317 bytes, checksum: 7bba714394b346e7c8fb0474252f00d4 (MD5) Previous issue date: 2011 / Resumo: O custo dos materiais faz parte do cálculo do valor dos honorários odontológicos. As resinas compostas são materiais usualmente utilizados em restaurações dentárias diretas de dentes posteriores. O objetivo desse trabalho foi determinar o valor total do custo dos materiais diretos e indiretos utilizados em restaurações de dentes posteriores em resina composta. O cálculo dos custos foi baseado no método de sistema de custeio variável. As repetições foram obtidas de preparos classes I e II em dentes pré-molares e molares artificiais. A lista dos materiais foi obtida por meio de consulta a uma banca de juízes e baseada nos padrões de excelência comprovados na literatura. Os valores dos materiais foram obtidos de uma média dos valores consultados no mercado fornecedor. Os materiais foram quantificados para cada tipo de preparo com uso de balança de precisão. Os dados foram avaliados por estatística descritiva e pelos testes de Mann-Whitney e Kruskal-Wallis. A análise foi feita para os materiais utilizados em biossegurança (Capítulo 1) e para a realização da restauração (Capítulo 2). O custo encontrado para a biossegurança foi de R$ 8,85. Para os demais materiais para restauração de Classe I foi de R$ 8,69 e para a de Classe II de R$ 8,86. Não houve diferença estatística no custo entre os tipos de preparos para restauração, sendo a média total dos materiais de R$ 17,63. Os valores encontrados podem ser utilizados no cálculo do valor final do procedimento restaurador, auxiliando na gestão de serviços odontológicos públicos ou privados / Abstract: The cost of the materials is part of the calculation of the value of dental fees. The composite resins are materials commonly used in direct posterior dental restorations. The aim of this study was to determine the total value of the cost of the direct and indirect materials used in composite resin posterior dental restorations. The calculation of costs was based on the method of variable costing system. The repetitions were obtained from classes I and II cavities in artificial premolars and molars teeth. A list of the materials was obtained by an experts panel and based on the excellence standards established in the literature. The values of the materials were obtained from an average of the values founded in the supplier market. The materials were quantified for each type of cavity with the use of precision balance. The data were assessed by descriptive statistics and by Mann-Whitney and Kruskal-Wallis tests. The analysis was performed for the materials used in biosafety (Chapter 1) and on the restoration (Chapter 2). The founded cost (Brazilian current coin) was R$8.85 for biosafety. The others materials for Class I restorations was R$8.69 and for Class II restorations was R$ 8.86. There was no statistically significant difference in cost between the types of cavities, with an average of total materials of R$ 17.63. These values might be used in the calculation of the final value of the restorative procedure, aiding in the management of public or private dental care services / Mestrado / Mestre em Odontologia em Saúde Coletiva

Indiana University-Purdue University Indianapolis (IUPUI) / An investigation was conducted into the effect of acid etching of the enamel and the use of pins on the retention of direct filling resins when used for restoration of fractured incisor teeth. The retention secured by these techniques as related to the cavity design also was studied. Four different cavity preparations were used. The retention of the resin in all four was compared when there was no pretreatment of the enamel, when the enamel was etched by 50 per cent phosphoric acid, and when pins were used for retention. Retention was assessed on the basis of resistance of the restoration to displacement by a lingual force. No significant difference was observed in retention as related to cavity design in the control specimens. In all four cavity preparations, acid etching of the enamel and the use of two retentive pins increased the resistance of the restorations to displacement. (However; when only one "L" shaped retentive pin was employed in Conjunction with a flat incisal preparation the force required to accomplish displacement was no greater than for controls.) The acid etch technique when employed with a cavity preparation that extended 1.7 mm. or more onto the lingual surface of the enamel generally offered a higher resistance to lingual force than double pin retained restorations. There was no significant difference between the resistance offered by a circumferential preparation when the resin was retained by either acid etching or by two pins. In the acid etch technique the enamel surface area and its distribution are important factors in retention.

Orientador: Milton Carlos Kuga / Resumo: O objetivo do presente estudo foi avaliar a adaptação interna (AI), resistência de união (RU) e resistência à fratura (RF) da associação entre resinas bulk-fill de alta viscosidade e adesivos simplificados, quando utilizados para restaurar dentes que foram endodonticamente tratados. Foram avaliados 4 sistemas restauradores comerciais, sendo eles Grupo Controle (GC): Scotchbond Multi-Purpose + Filtek Z350XT (3M/ESPE); (SBU/FBF) Single Bond Universal + Filtek Bulk-fill (3M/ESPE); (OBA/SF) OptBond All-in-one + Sonic Fill (Kerr) e (TBU/TBF)Tetric-N- Bond Universal + Tetric-N-Ceram Bulk-Fill (Ivoclar/Vivadent). Em 32 pré-molares humanos, a superfície oclusal foi planificada, cavidades classe I padronizadas foram confeccionadas e os dentes foram tratados endodonticamente .A irrigação foi feita com hipoclorito de sódio (NaOCl) 2,5% e EDTA 17%. Após a obturação (AH Plus, Dentsply, De Trey, Konstanz, Germany) e a limpeza da câmara pulpar com álcool 99%, foi aplicada uma fina camada de cimento de ionômero de vidro modificado por resina Ionoseal (VOCO, GmbH, Vuxhaven, Alemanha). Os dentes foram então divididos nos grupos experimentais (n=8), e as restaurações foram realizadas. Após 24 horas, os espécimes receberam um corte centralizado, as metades obtidas foram polidas e réplicas em resina epóxi para a avaliação da AI em microscopia eletrônica de varredura foram confeccionadas. Em 40 terceiros molares humanos, um corte foi feito para exposição da dentina profunda. Após a padronização da... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The objective of this study was to evaluate internal adaptation (IA), bond strength (BS), and fracture resistance (FR) of the combination of high-viscosity bulk-fill resins and simplified adhesives in the restoration of endodontically-treated teeth. Four commercial restoration systems were evaluated, which were the control group (CG) in which Scotchbond Multi-Purpose + Filtek Z350XT (3M/ESPE) was used, (SBU/FBF) Single Bond Universal + Filtek Bulk-fill (3M/ESPE); (OBA/SF) OptBond All-in-one + Sonic Fill (Kerr), and (TBU/TBF)Tetric-N- Bond Universal + Tetric-N-Ceram Bulk-Fill (Ivoclar/Vivadent). In 32 human pre-molars, the occlusal surface was flattened, standard class I cavities were created, and the teeth were treated endodontically. Irrigation was performed using 2.5% sodium hypochlorite (NaOCl) and 17% EDTA. After the fillings (AH Plus, Dentsply, De Trey, Konstanz, Germany) and cleaning of the pulp chamber with 99% ethanol, a thin layer of ionoseal resin-modified glass iomer luting cement was applied (Voco, GmbH, Vuxhaven, Germany). The teeth were then divided into the experimental groups (n=8) and the restorations were performed. After 24 hours, the specimens were sectioned in the middle and the halves obtained were polished, and replicas were made in epoxy resin to evaluate IA using scanning electron microscopy. In 40 human molar thirds, a cut was made to expose the deep dentin. After standardization of the smear layer (file # 600), the tissue was treated with 2.5% NaOCl... (Complete abstract click electronic access below) / Doutor

Thesis (M.S.D.)--Indiana University School of Dentistry, 2009. / Title from PDF t. p. (viewed Feb. 5, 2010) Advisor(s): Jeffrey A. Platt, Chair of the Research Committee, Joseph Legan, Carl J. Andres, David Brown, Burak Taskonak . Curriculum vitae. Includes abstract. Includes bibliographical references (leaves 45-52).

Diss. (sammanfattning) Umeå : Univ., 2004. / Härtill 5 uppsatser.

Thesis (M.S.)--University of Michigan, 1968.

Thesis (M.S.)--University of Michigan, 1988.

Thesis (M.S.)--University of Michigan, 1978.

Thesis (M.S.)--University of Michigan, 1968.