Sediment sampling, bathymetric data, and seismic reflection profiling were used to classify sediment deposition patterns on the Carnegie Ridge. Core sampling was used to relate compositional characteristics between equivalent areas, and seismic profiling to establish vertical variations. Three study areas were selected based on core distribution along the ridge. Grids of the following parameters were obtained: slope, elevation, percentage of carbonate, SiO2, and organic carbon contents. The general CaCO3 content distribution is highest on the ridge except in the areas affected by terrigenous deposition from the mainland, and volcanic debris from Galapagos Volcanic Platform. The general SiO2 content distribution is highest south of the Equator, bordering the west ridge. The organic carbon content is high in the equatorial upwelling area and close to the mainland. The relationship between organic carbon and carbonate was determined through correlation analysis. Based on those analyses, and considering the mixture of sedimentary sources and tectonic processes, the carbonate sediment is more important to this area. Sediments on the Carnegie Ridge above the lysocline are affected by three different types of processes controlling the sediment deposition. The first is the location of the high productivity zone in which pelagic settling is the source of sediment. The second is the difference in sea water properties between the Panama and Peru Basins surrounding the ridge, which creates different depositional environments. These properties create horizontal and vertical variations within water masses. Intermediate depths are affected by northward Pacific Central Water and bottom waters by northward Pacific Deep Water. The deflection of the bottom water flow by the existence of the Carnegie Ridge as a natural barrier produces scouring effects on the south flank. The third process controlling deposition is underwater dissolution on the saddle and east ridge by organic carbon degradation, which is enhanced by bottom water flow. Significant differences in sedimentation types were found in areas with hilltops, contrasted slopes, and slope bases, primarily related to changing depths and water flows, and lateral transport along the steepest north scarp.

Sediment sampling, bathymetric data, and seismic reflection profiling were used to classify sediment deposition patterns on the Carnegie Ridge. Core sampling was used to relate compositional characteristics between equivalent areas, and seismic profiling to establish vertical variations. Three study areas were selected based on core distribution along the ridge. Grids of the following parameters were obtained: slope, elevation, percentage of carbonate, SiO2, and organic carbon contents. The general CaCO3 content distribution is highest on the ridge except in the areas affected by terrigenous deposition from the mainland, and volcanic debris from Galapagos Volcanic Platform. The general SiO2 content distribution is highest south of the Equator, bordering the west ridge. The organic carbon content is high in the equatorial upwelling area and close to the mainland. The relationship between organic carbon and carbonate was determined through correlation analysis. Based on those analyses, and considering the mixture of sedimentary sources and tectonic processes, the carbonate sediment is more important to this area. Sediments on the Carnegie Ridge above the lysocline are affected by three different types of processes controlling the sediment deposition. The first is the location of the high productivity zone in which pelagic settling is the source of sediment. The second is the difference in sea water properties between the Panama and Peru Basins surrounding the ridge, which creates different depositional environments. These properties create horizontal and vertical variations within water masses. Intermediate depths are affected by northward Pacific Central Water and bottom waters by northward Pacific Deep Water. The deflection of the bottom water flow by the existence of the Carnegie Ridge as a natural barrier produces scouring effects on the south flank. The third process controlling deposition is underwater dissolution on the saddle and east ridge by organic carbon degradation, which is enhanced by bottom water flow. Significant differences in sedimentation types were found in areas with hilltops, contrasted slopes, and slope bases, primarily related to changing depths and water flows, and lateral transport along the steepest north scarp.

A chronostratigraphic subdivision of the Upper Jurassic synrift sediments in the eastern Barrow Sub-basin was developed from the integration of core logging, petrography, well log sequence analyses and seismic stratigraphy. From this basis, the Callovian to base Cretaceous sediments may be subdivided into five depositional sequences. The development of the sequence boundaries, in most part, is closely related to periods of major changes in basin configuration associated with the sequential breakup of eastern Gondwanaland. Initiation of the Upper Jurassic rift complex occurred during late Callovian early Oxfordian associated with the development of a northeast-southwest trending spreading centre on the Argo Abyssal Plain. The spreading centre propagated southwards during the Late Jurassic. This resulted in active rifting in the Barrow Sub-basin and ultimately led to the separation of the Indian and Australian plates during Valanginian time.Upper Jurassic synrift sediments in the eastern Barrow Sub-basin consist of detached basin floor fan complexes, channelised and canyon fed fan systems, slump deposits, prograding outer shelfal to slope deposits and deep marine claystones. Post-depositional uplift of the eastern shelfal areas during the Late Jurassic resulted in erosion of the transgressive and highstand fluvial-deltaic to shelfal deposits. These periods of uplift and erosion provided much of the sediment redeposited in the basinal areas during the lowstand periods. Seven sandstone facies were recognised in the Upper Jurassic sedimentary section based on core control. Each sandstone has unique reservoir characteristics which can be related to the depositional setting. / The abundance of glauconite and belemnites combined with ichnology and biostratigraphic assemblages associated with marine environments, indicate that deposition of all the sandstone facies occurred within an outer shelfal - deep marine environment. Reservoir quality was best developed in the dominantly medium grained, moderate - well sorted sandstones, (facies 7), which were deposited as detached, basin floor submarine fan sands or interbedded turbidites. In contrast, reservoir quality was relatively poorly developed in the remaining facies which were deposited as slope fans, slumps, or distal turbidite deposits.The abundance of quartz and presence of banded iron, jasper, and potassic feldspar grains support the provenance for the basinal sandstone facies being the Precambrian alkyl granites and banded iron formation of.the Pilbara Shield and Hammersley Ranges. These Precambrian igneous rocks and metasediments mark the eastern boundary of the Barrow Sub-basin study area. To predict the distribution of sedimentary facies in the Upper Jurassic synrift sediments of the eastern Barrow Sub-basin, the interplay between the major controlling depositional processes, namely tectonics, sediment supply and eustasy must be understood. Subdivision of the synrift sedimentary section on the basis of lithostratigraphy can be misleading and does not adequately resolve the facies relationships observed in the well intersection. The results of this research form the basis for a regional sequence analysis and seismic stratigraphic study.

Depositional processes are the most critical, complicated conditions that govern sediment properties and their variations, which in turn significantly affect the geotechnical behavior of the sediment. The complexity of depositional and post-depositional processes, which results in a variety of depositional environments, makes constructing a plausible model for the consolidation process of sediments difficult. The mutual influence between the temporal and spatial variation of depositional environments with their resultant physical and mechanical properties cause several compression issues, such as consolidation settlement and land subsidence, which mostly occur in estuarine-riverine regions throughout the world. The first aim of this study is proposing a new grain-size based scheme to classify unconsolidated inorganic sediments that cover a wide range of natural depositional environments with a special emphasis on fine-grained deposits. The proposed classification depends on the linear relationship between percent Fines and the silt fraction. By combining grain size characteristics and plasticity, the proposed scheme provides further characterization of depositional environments. The proposed scheme extends the utility of the scheme beyond simply classifying the sediment class, towards inferring the potential mechanical behavior of sediments having various Grain Size Distribution (GSD) proportions and mineralogy. Addressing elastic wave properties as a geotechnical parameter, in particular, shear wave velocities to determine the mechanical behavior of sediments is because is strongly influenced by the change in those physical state properties during compression and cementation processes. This study presents a continuous function that explicitly uses shear wave velocity to predict the non-linear function of consolidation process (e -log p'), This approach also defines factors that describe the depositional environment, such as grain size and plasticity limits. These factors are shown to influence and control the e -log p' relationship. Thus, the resulting function is shown to be applicable to a variety of sedimentary materials. Also, in this dissertation, elastic shear-wave velocity under critical state framework was employed. A shear wave-based constitutive model was developed that is able to predict the stress-strain behavior of a normally consolidated sediments, under undrained loading. A new power-type relationship that predicts the shear strength behavior and critical stress paths of fine-grained sediments under undrained conditions. Also, it investigates the reliability of the link between input model parameters with the basic properties of a variety of fine-grained sediments. As importance of measuring of elastic wave velocities, a number of soil tests performed during particular construction stages can be reduced and compensated. This reduces the cost of evaluating the stability level, monitoring stress path distributions, and determining undrained shear strength behavior during particular stages of the construction process. The study also provides correlations that can be applied in various fine-grained depositional environments that have weak, fine-grained soil layers, on which the constructions are built.

Ce travail de thèse est centré sur l'analyse des compositions isotopiques de la glace (d18O et dD) de deux nouvelles carottes de glace longues provenant des régions subtropicale et tempérée des Andes. La première carotte, longue de 42m, a été extraite en 2003 au col du glacier Coropuna au Pérou (72°39'W, 15°32'S, 6425m) et la deuxième de 122m au sommet du glacier San Valentin au Chili (46°35'S, 73°19'W, 4032m) en 2007. L'étude a porté sur la représentativité du signal isotopique comme archive du climat sur le dernier siècle, correspondant à la totalité de la carotte du Coropuna et les 70 premiers mètres au San Valentin, dans deux régions climatiques différentes. Nous avons observé que les enregistrements des signaux isotopiques sont affectés par des processus de post-dépôt. Au col du Coropuna, le signal est lissé par homogénéisation en dessous de 3m de profondeur à cause de la percolation d'eau de fonte et de la diffusion isotopique via un flux de vapeur, et aucune interprétation climatique n'est possible à partir du signal isotopique. Au so mmet du San Valentin, les vents forts, présents toute l'année, érodent et/ou redistribuent la majorité des précipitations annuelles en créant certainement des hiatus sur une voire plusieurs années ou, au contraire, des dépôts exceptionnels de plusieurs mètres. Ces conditions rendent l'identification des cycles isotopiques annuels difficile et aucune relation entre les isotopes et les paramètres climatiques n'a pu être établie due à une datation très incertaine. / This work is focused on the analyses of two new isotopic records (d18O and dD) from Andean ice cores in the subtropics and temperate latitudes. The first 42 m-long ice core was extracted in 2003 from the saddle of Coropuna glacier in Peru (72°39'W, 15°32'S, 6425 m), and the second 122 m-long core in 2007 from the San Valentin summit in Chile (46°35'S, 73°19'W, 4032 m). The isotopic signals were investigated for their suitability as climate archives over the last century, covering the 42 m-long ice core from Coropuna and the first 70 meters of the core from San Valentin, in two different climatic regions. We observed that the isotopic records are affected by post-depositional processes. At the saddle of Coropuna, isotopic homogenization occurs below 3 m as a result of meltwater percolation and isotopic diffusion, and thus the climatic interpretation is not possible. At the San Valentin summit, removal and/or re-deposition of snow by strong winds occurring throughout the year may create a lack of one or more annual snow layers or, on the other hand, may cause unexpected deposits of several meters. Due to these potential conditions, we cannot always identify the annual isotopic cycles and the isotopes histories show no significant correlation with the climatic parameters because of an uncertain dating.

No description available.