abstract: From 2D planar MOSFET to 3D FinFET, the geometry of semiconductor devices is getting more and more complex. Correspondingly, the number of mesh grid points increases largely to maintain the accuracy of carrier transport and heat transfer simulations. By substituting the conventional uniform mesh with non-uniform mesh, one can reduce the number of grid points. However, the problem of how to solve governing equations on non-uniform mesh is then imposed to the numerical solver. Moreover, if a device simulator is integrated into a multi-scale simulator, the problem size will be further increased. Consequently, there exist two challenges for the current numerical solver. One is to increase the functionality to accommodate non-uniform mesh. The other is to solve governing physical equations fast and accurately on a large number of mesh grid points. This research rst discusses a 2D planar MOSFET simulator and its numerical solver, pointing out its performance limit. By analyzing the algorithm complexity, Multigrid method is proposed to replace conventional Successive-Over-Relaxation method in a numerical solver. A variety of Multigrid methods (standard Multigrid, Algebraic Multigrid, Full Approximation Scheme, and Full Multigrid) are discussed and implemented. Their properties are examined through a set of numerical experiments. Finally, Algebraic Multigrid, Full Approximation Scheme and Full Multigrid are integrated into one advanced numerical solver based on the exact requirements of a semiconductor device simulator. A 2D MOSFET device is used to benchmark the performance, showing that the advanced Multigrid method has higher speed, accuracy and robustness. / Dissertation/Thesis / Masters Thesis Materials Science and Engineering 2015

In the realm of FPGAs, many tool vendors offer behaviorally-based simulators aimed at easing the complexity of large FPGA designs. At times, a behaviorally-modeled design does not work in hardware as expected or intended. VTsim, a Virtex-II device simulator, was designed to resolve this and many other design problems by providing a window into the FPGA fabric via a virtual device. VTsim is an event-driven device simulator modeled at the CLB level with multiple clock domain support. Utilizing JBits3 and ADB, VTsim enables simulation and examination of all resources within an FPGA via a virtual device. The only input required by VTsim is a bitstream, which can be generated from any tool suite. The simulator is part of the JHDLBits open-source project, and was designed for rapid response, low memory usage, and ease of interaction. / Master of Science