Please read the abstract in the section 00front of this document / Thesis (DPhil (Electronic Engineering))--University of Pretoria, 2007. / Electrical, Electronic and Computer Engineering / unrestricted

International Telemetering Conference Proceedings / October 25-28, 1999 / Riviera Hotel and Convention Center, Las Vegas, Nevada / In this paper, orthogonal wavelets are employed to produce multiscale signaling. It is shown that signaling using these functions is bandwidth efficient compared other signaling schemes, including SFSK and GMSK. For signaling in Rician fast fading channel, it is also shown that scaling functions is superior in term of achieving low level of probability of error. Even for multiscale signaling, the level probability of error achieved by using wavelet is lower than conventional flat-top signaling. The benefits are largest for channels with small B(D)T , in which the degradation due to fading is most severe.

Komplexní magnetické materiály v nanoměřítku mají své nezastupitelné místo v moderních zařízeních, jako jsou digitální paměti nebo senzory. Moderní technologické procesy vyžadují porozumění a možnost kontroly moderních magnetických materiálů až na atomární úrovni. Jednou z možných cest je magnetická analýza za použití transmisní elektronové mikroskopie (TEM), která je unikátní díky možnosti zobrazování až v subatomárním měřítku. Tato práce popisuje možnosti zobrazování metamagnetických materiálů metodou TEM. Tyto materiály se vyznačují možností stabilizace více magnetických uspořádání najednou za daných vnějších podmínek. Modelovým systémem pro popis zobrazovacích možností metody TEM byly zvoleny tenké vrstvy metamagnetické slitiny FeRh. Tento materiál prochází při zahřívání fázovou přeměnou z antiferomagnetické do feromagnetické fáze. Podrobně jsou rozebrány procesy výroby vzorků, což je zásadní pro úspěšnou TEM analýzu. Pro magnetické zobrazování vzorků v TEMu je využita technika diferenciálního fázového kontrastu (DPC), umožňující přímé mapování rozložení magnetické indukce ve vzorku. Důsledně je diskutován vznik signálu v DPC, což je nezbytné pro porozumění a analýzu výsledných dat. FeRh vrstvy jsou podrobeny analýze struktury, chemického složení a především magnetických vlastností obou magnetických fází. Závěrem je představen proces přímého ohřevu metamagnetických vrstev v TEMu.

Yes / In the design of phase shifters, the modeling equations are too complicated and require some approximations to be derived correctly by hand. In response to this problem, this paper presents a generalized concept, algorithm, and MATLAB code that provide the exact modeling equations of the transmission parameters and the scattering parameters of any 90^o wideband stub-loaded phase shifter. The proposed code gives the modeling equations in term of variables for any number of stubs and characteristic impedance value by utilizing the symbol-based analysis of the MATLAB. It also illustrates the results as a function of normalized frequency relative to the center frequency f_o, and can be and can be tailored to any user-defined frequency range. As a matter of comparison, a three-stub wideband 90^o stub-loaded phase shifter is simulated using CST Microwave Studio and experimentally fabricated on Rogers RT5880 dielectric substrate with dimensions of 30×40×0.8 〖mm〗^3. The comparison reveals the accuracy of the proposed computerized modeling with -10 dB impedance bandwidth equal to 90% (0.55 fo-1.45 fo), (90∓5 degrees ) phase difference bandwidth equal to 100% (0.5 fo-1.5 fo), and negligible insertion loss. The novelty of this work is that the proposed code provides the exact modeling equations of the stub-loaded phase shifter for any number of stubs regardless the complexity of the mathematical derivations.

No description available.

Demonstration of ultrafast all-optical signal processing (AOSP) using silicon as the active material has been limited by large two-photon absorption loss and long lifetimes of the resulting free carriers. For AOSP at speeds in the terahertz, an order of magnitude faster than that the fastest current electronic counterpart, a class of π-conjugated organic molecules called polymethines provides a promising alternative to silicon as they possess large third-order nonlinearities, and ultrafast polarization response to an incident field. The challenge in the application of polymethines as active nonlinear optical materials for AOSP is in translating their promising molecular properties into bulk material properties. The large linear polarizability and charged nature of the polymethines molecules strongly promote aggregation and phase-separation in solid blends, offsetting their advantageous molecular optical properties. In this work, polymethines’ resistance to deleterious spontaneous symmetry breaking and aggregation was enhanced by substitutions of metal- and chalcogen- containing terminal groups, and rigid steric groups above and below the π-conjugated plane of polymethine chain. The resulting polymethines/amorphous polycarbonate (APC) blend films demonstrated an unprecedentedly high two-photon figure-of-merit, |Re(χ(3))/Im(χ(3))| and low linear loss. The optical quality of the polymethines/APC films was also improved by replacing the commonly-used alkyl ammonium counterions with more polarizable aryl phosphonium counterions with moderate ground state dipole moment. The resulting dye-polymer blend films showed an enhanced near-infrared transparency while its magnitude of the third-order susceptibility, |χ(3)|, showed a good agreement with that extrapolated from the molecular third-order polarizability, γ. For facile integration of these promising organic materials into SOH, the substrate surface was functionalized using silane coupling chemistry for the reduction of surface energy mismatch between the polymer films and the waveguide containing substrates. The optical and SEM micrographs showed vastly improved coverage and infiltration of the microfeatures. Furthermore, to enable the precise engineering of waveguide cross-sectional dimensions for single-mode propagation in the organic cladding, the dispersion curves of the polymethines/polymer blends were generated using prism coupling and ellipsometry. The combined efforts in the development of molecules and materials discussed in the thesis have culminated into a successful identification and optimization of the polymethines dyes and their polymer blends for imminent demonstrations of on-chip AOSP at terahertz speed.

No description available.

<p>The task of the project was to evaluate a differential phase shift keying demodulation technique by replacing a Mach-Zehnder interferometer receiver with an optical filter (Fiber Bragg Grating). Computer simulations were made with single optical transmission, multi channel systems and transmission with combined angle/intensity modulated optical signals. The simulations showed good results at both 10 and 40 Gbit/s. Laboratory experiments were made at 10 Gbit/s to verify the simulation results. It was found that the demodulation technique worked, but not with satisfactory experimental results. The work was performed at Eindhoven University of Technology, Holland, within the framework of the STOLAS project at the department of Electro-optical communication.</p>

The task of the project was to evaluate a differential phase shift keying demodulation technique by replacing a Mach-Zehnder interferometer receiver with an optical filter (Fiber Bragg Grating). Computer simulations were made with single optical transmission, multi channel systems and transmission with combined angle/intensity modulated optical signals. The simulations showed good results at both 10 and 40 Gbit/s. Laboratory experiments were made at 10 Gbit/s to verify the simulation results. It was found that the demodulation technique worked, but not with satisfactory experimental results. The work was performed at Eindhoven University of Technology, Holland, within the framework of the STOLAS project at the department of Electro-optical communication.