The accomplishments presented in this thesis are the development of three models for simulation of space charge generation in the phosphor layer of alternating current thin-film electroluminescent (ACTFEL) devices and the results from simulation of these models. First, a single sheet charge model is developed and simulated. The single sheet charge model is a model that simplifies the problem of modeling an arbitrary distribution of space charge across the phosphor layer by lumping all of the space charge into a sheet of charge at a specified location in the phosphor layer. In this model and all subsequent models, space charge creation is assumed to occur by field emission from bulk traps or by impact ionization of deep-level traps. A fairly exhaustive parametric variation study of the single sheet charge model is performed and the results are presented and discussed. The results show space charge effects that are quite dependent on several parameters such as the number of bulk traps in the phosphor layer, the location of the sheet of charge, the capture efficiency for space charge annihilation, and the characteristic field for impact ionization of the deep-level traps. The second model considered is a logical extension of the single sheet charge model, the two sheet charge model, which models the space charge distribution as two sheets of charge rather than one. This model has potential application in the simulation of ACTFEL devices which exhibit large and/or symmetrical space charge effects. The final model developed is an equivalent circuit/SPICE model of the single sheet charge model. Actually, two models are developed, one for space charge creation by field emission and one for impact ionization of deep-levels. Two SPICE models are required because of functional differences in the dependencies of space charge creation. The results of a simulation showing overshoot generated by SPICE are given for the field emission equivalent circuit. / Graduation date: 1996

Auditory graphsdisplays that represent graphical, quantitative information with soundhave the potential to make graphical representations of data more accessible to blind students and researchers as well as sighted people. No research to date, however, has systematically addressed the attributes of data that contribute to the complexity (the ease or difficulty of comprehension) of auditory graphs. A pair of studies examined the role of both data density (i.e., the number of discrete data points presented per second) and the number of trend reversals for both point estimation and trend identification tasks with auditory graphs. For the point estimation task, results showed main effects of both variables, with a larger effect attributable to performance decrements for graphs with more trend reversals. For the trend identification task, a large main effect was again observed for trend reversals, but an interaction suggested that the effect of the number of trend reversals was different across lower data densities (i.e., as density increased from 1 to 2 data points per second). Results are discussed in terms of data sonification applications and rhythmic theories of auditory pattern perception.

Front projection is an economical method to produce large displays. However, the twin problems of occlusions, which create shadows on the screen, and light projected onto users near the screen, potentially blinding them, makes front projection a poor fit for large upright interactive surfaces. Virtual Rear Projection (VRP) uses multiple redundant front projectors to provide the user experience of using a rear projected display. By using a projector-camera system to mitigate shadows and blinding light, a virtual rear projected display significantly improves upon the user experience of a traditional front projected display, allowing it to replace a rear projected display. In this thesis we characterize the problems caused by shadows and occlusions and develop projection technologies that mitigate shadows and blinding light. We also present a laboratory performance evaluation, and a user evaluation of the technology showing that VRP improves the user experience with respect to traditional front projection.

3D design is being recognized widely as the next BIG thing in system integration. However, design and analysis tools for 3D are still in infancy stage. Power supply noise analysis is one of the critical aspects of a design. Hence, the area of noise analysis for 3D designs is a key area for future development. The following research presents a new parasitic RLC modeling technique for 3D chips containing TSVs as well as a novel optimization algorithm for power-ground network of a 3D chip with the aim of minimizing noise in the network. The following work also looks into an existing commercial IR drop analysis tool and presents a way to modify it with the aim of handling 3D designs containing TSVs.

Thesis (Ph. D.)--Virginia Polytechnic Institute and State University, 1991. / Vita. Abstract. Includes bibliographical references (leaves 174-179). Also available via the Internet

Thesis (Ph. D.)--University of Missouri-Columbia, 2000. / Typescript. Vita. Includes bibliographical references (leaves 202-221). Also available on the Internet.

Thesis (Ph. D.)--University of Washington, 2001. / Vita. Includes bibliographical references (p. 155-162).

Thesis (M. Sc.)--University of Canterbury, 2009. / Typescript (photocopy). Includes bibliographical references (leaves 82-93). Also available via the World Wide Web.

Thesis (M.B.Sc.)--Victoria University of Wellington, 2007. / Includes bibliographical references.

Thesis (Ph.D)--Computing, Georgia Institute of Technology, 2009. / Committee Chair: Stasko, John; Committee Member: Bartram, Lyn; Committee Member: Catrambone, Richard; Committee Member: Guzdial, Mark; Committee Member: Mynatt, Elizabeth. Part of the SMARTech Electronic Thesis and Dissertation Collection.