Carbon nanoparticles (CNPs) have drawn great attention in the last few years owing to their unique properties such as excellent water solubility, chemical stability, inertness, low toxicity, good bio-compatibility, and tunable photo physical properties. Recently, researchers have focused on hetero atom (N, S and B) doped CNPs due to their excellent properties. These properties make the CNPs and doped CNPs as potential candidates for a wide range of applications. For example, metal ion detection in aqueous solution, bio-imaging, bio-sensing, photovoltaic devices, cleavage of deoxyribonucleic acid (DNA), and catalysis. Therefore, CNPs are alternative to inorganic semiconductor nanoparticles. However, CNPs with diameter less than 10 nm have been prepared using various approaches including top down and bottom methods. Cutting the bulk carbon from high dimensional to zero dimensional by using either physical or chemical process are classified as top down method. Bottom up method refers the conversion of organic precursor to nano-carbon by using thermal pyrolysis, microwave based hydrothermal method, cage opening of C60 molecules. In the present work, I have dealt with the facile synthesis of CNPs and different hetero atom doped carbon nanoparticles (N-CNPs, B-CNPs, and BN-CNPs) using the hydrothermal method. Based on their intriguing physical and chemical properties, these CNPs/doped-CNPs have been explored for various applications such as (i) metal-free catalysts, (ii) color tunability from red to blue and bio-imaging, (iii) ammonia sensing, (iv) white light generation, and (v) detection of picric acid (PA) in aqueous solution. Finally, I have presented 3D nanodendrites of N-CNPs and Pd NPs and their excellent catalytic mass activity for methanol electro-oxidation and ultra-fast reduction of 4-nitrophenol.

Polyaniline (PANI), when doped with small-molecule acids, is an attractive candidate for organic and polymer electronics because of its high electrical conductivity. Its utility as functional components in electrical devices, however, has been severely restricted because such PANI has limited processibility stemming from its limited solubility in common solvents. To overcome this barrier, we have developed water dispersible PANI that is template polymerized in the presence of a polymer acid, poly(2-acrylamido-2-methyl-1-propanesulfonic acid), or PAAMPSA. The polymer acid serves two roles: it acts as a dopant to render PANI conductive and excess water soluble pendant groups provide dispersibility of PANI in aqueous media. While the introduction of polymer acids renders the conducting polymer processible, such gain in processibility is often accompanied by a significant reduction in conductivity. As such, PANI that is doped with polymer acids has only seen limited utility in organic electronics. Given the promise of conducting polymers in organic electronics in general, this thesis focuses on the elucidation of processing-structure-property relationships of PANI-PAAMPSA with the aim of ultimately improving the electrical conductivity of polymer acid-doped PANI. By controlling the molecular weight and molecular weight distribution of the polymer acid template, we have improved the conductivity of PANI-PAAMPSA from 0.4 to 2.5 S/cm. The conductivity increases with decreasing molecular weight of PAAMPSA, and it further increases with narrowing the molecular weight distribution of PAAMPSA. Strong correlations between the structure and the conductivity of PANI-PAAMPSA are observed. In particular, the crystallinity of PANI increases with increasing the conductivity of PANI-PAAMPSA. Given that the crystallinity qualifies the molecular order in PANI-PAAMPSA, we observe a linear correlation between molecular order and macroscopic charge transport in PANI-PAAMPSA. PANI-PAAMPSA forms electrostatically stabilized sub-micron particles during polymerization due to strong ionic interactions between the sulfonic acid groups of PAAMPSA and aniline. When cast as films, the connectivity of these particles must play an important role in macroscopic conduction. The size and size distribution of PANI-PAAMPSA particles is strongly influenced by the molecular characteristics of polymer acid template. Templating the synthesis of PANI-PAAMPSA with a higher molecular weight PAAMPSA results in larger particles, and templating with a PAAMPSA having a larger molecular weight distribution results in a large size distribution in the particles. Because conduction in PANI-PAAMPSA films is governed by how these particles pack, the macroscopic conductivity of PANI-PAAMPSA films increases with increasing particle density, that is reducible from the molecular characteristics of PAAMPSA. Moreover, PANI-PAAMPSA particles are structurally and chemically inhomogeneous. The conductive portions of the polymer preferentially segregate to the particle surface. Conduction in these materials is therefore mediated by the particle surface and conductivity thus scales superlinearly with particle surface area per unit film volume. We further have improved the electrical conductivity of PANI-PAAMPSA by more than two orders of magnitude via post-processing solvent annealing with dichloroacetic acid (DCA). Since DCA is a good plasticizer for PAAMPSA and its pKa is lower than that of PAAMPSA (pKas of DCA and PAAMPSA are 1.21 and 2.41, respectively, at room temperature), DCA can effectively moderate the ionic interactions between PANI and PAAMPSA, thereby relaxing the sub-micron particulate structure arrested during polymerization. PANI-PAAMPSA can thus rearrange from a “compact coil” to an “extended chain” conformation upon exposure to DCA. Efficient charge transport is thus enabled through such “extended chain” PANI-PAAMPSA structure. DCA-treated PANI-PAAMPSA exhibits an average conductivity of 48 S/cm. The DCA treatment is not only specific to PANI-PAAMPSA. This treatment can also enhance the conductivity of commercially-available poly(ethylene dioxythiophene) that is doped with poly(styrene sulfonic acid), or PEDOT-PSS. Specifically, DCA-treated PEDOT-PSS exhibits a conductivity of 600 S/cm; this conductivity is the highest among polymer acid-doped conducting polymers reported so far. PANI-PAAMPSA can effectively function as anodes in organic solar cells (OSCs) whose active layer is a blend of poly(3-hexylthiophene), P3HT, and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM). Specifically, the OSCs with PANI-PAAMPSA anodes exhibit an average short circuit current density of 1.95 mA/cm², open circuit voltage of 0.52 V, fill factor of 0.38, and efficiency of 0.39 %. The use of DCA-treated PANI-PAAMPSA as anodes increases device performance (i.e., short circuit current density and thereby efficiency) of OSCs by approximately two and a half fold. The OSCs with DCA-treated PANI-PAAMPSA anodes exhibit short circuit current density and efficiency as high as 4.95 mA/cm² and 0.97 %, respectively. We demonstrated several factors that govern the electrical conductivity of polymer acid-doped conducting polymers. Design rules, such as those illustrated in this study, can enable the development of conducting polymers that is not only easily processible from aqueous dispersions, but also sufficiently conductive for electronic applications, and should bring us closer to the realization of low-cost organic and polymeric electronics. / text

Photovoltaic technologies use light from the sun to create electricity, using a wide range of materials and mechanisms. The generation of clean, renewable energy using this technology must become price competitive with conventional power generation if it is to succeed on a large scale. The field of photovoltaics can be split into many sub-groups, however the overall aim of each is to reduce the cost per watt of the produced electricity. One such solar cell which has potential to reduce the cost significantly is the dye sensitised solar cell (DSC), which utilises cheap materials and processing methods. The reduction in cost of the generated electricity is largely dependent on two parameters. Firstly, the efficiency that the solar cell can convert light into electricity and secondly, the cost to deposit the solar cell. This thesis aims to address both factors, specifically looking at altering the transparent conducting oxide (TCO) and substrate in the solar cell. One method to improve the overall conversion efficiency of the device is to implement the DSC as the top cell in a tandem structure, with a bottom infra-red absorbing solar cell. The top solar cell in such a structure must not needlessly absorb photons which the bottom solar cell can utilise, which can be the case in solar cells utilising standard transparent contacts such as fluorine-doped tin oxide. In this work, transparent conducting oxides with high mobility such as titanium-doped indium oxide (ITiO) have been used to successfully increase the amount of photons through a DSC, available for a bottom infra-red sensitive solar cell such as Cu(In,Ga)Se2 (CIGS). Although electrically and optically of very high quality, the production of DSCs on this material is difficult due to the heat and chemical instability of the film, as well as the poor adhesion of TiO2 on the ITiO surface. Deposition of a interfacial SnO2 layer and a post-deposition annealing treatment in vacuum aided the deposition process, and transparent DSCs of 7.4% have been fabricated. The deposition of a high quality TCO utilising cheap materials is another method to improve the cost/watt ratio. Aluminium-doped zinc oxide (AZO) is a TCO which offers very high optical and electronic quality, whilst avoiding the high cost of indium based TCOs. The chemical and thermal instability of AZO films though present a problem due to the processing steps used in DSC fabrication. Such films etch very easily in slightly acidic environments, and are susceptible to a loss of conductivity upon annealing in air, so some steps have to be taken to fabricate intact devices. In this work, thick layers of SnO2 have been used to reduce the amount of etching on the surface of the film, whilst careful control of the deposition parameters can produce AZO films of high stability. High efficiency devices close to 9% have been fabricated using these stacked layers. Finally, transferring solar cells from rigid to flexible substrates offers cost advantages, since the price of the glass substrate is a significant part of the final cost of the cell. Also, the savings associated with roll to roll deposition of solar cells is large since the production doesn't rely on a batch process, using heavy glass substrates, but a fast, continuous process. This work has explored using the high temperature stable polymer, polyimide, commonly used in CIGS and CdTe solar cells. AZO thin films have been deposited on 7.5um thick polyimide foils, and DSCs of efficiency over 4% have been fabricated on the substrates, using standard processing methods.

Au cours de cette thèse, nous nous intéressons à deux applications nécessitant des sources laser impulsionnelles : l'imagerie active et l'usinage laser. L'imagerie active nécessite des sources laser efficaces émettant dans la gamme de sécurité oculaire (entre 1,5 µm et 1,7 µm) à des cadence de l'ordre du kilohertz et produisant des énergies par impulsion de plusieurs millijoules. Les sources efficaces émettant dans la gamme de sécurité oculaire utilisent l'ion erbium. Cependant la structure électronique complexe de l'ion erbium entraîne de nombreux effets parasites qui limitent fortement l'énergie accessible lors d'un fonctionnement à haute cadence. Pour diminuer l'influence de ces effets parasites nous avons utilisé le concept de fibres cristallines dans le cadre d'une collaboration entre le Laboratoire Charles Fabry et l'entreprise Fibercryst. La géométrie des fibres cristallines, combinant les propriétés des cristaux massifs et les avantages des fibres en verre nous a permis de dépasser les limites des sources actuelles. L'usinage de matériaux requière des sources laser impulsionnelles émettant dans le proche infrarouge (1 µm) et alliant forte énergie, forte puissance crête et forte puissance moyenne. Pour réaliser de telles sources, il est nécessaire d'utiliser des milieux à gain permettant de limiter les phénomènes thermiques et les effets induit par la puissance crête (effets non-linéaires). Pour cela nous avons utilisé à nouveau le concept de fibre cristalline, dopée cette fois ci par l'ion néodyme. Ces fibres cristallines ont été utilisées comme amplificateur de puissance pour amplifier des micro-lasers fonctionnant à haute cadence (de 1 à 100 kHz) et produisant des impulsions courtes (< 1 ns). / In this thesis we investigate two different pulsed laser sources for two specific applications : remote sensing and material processing. On the first part, remote sensing require efficient laser source emitting in the eye-safe range (1.5 – 1.7 µm) and producing several millijoules per pulse at a few kilohertz. Efficient eye-safe laser sources use erbium doped gain media. Nevertheless, the complex electronic structure of the erbium ion leads to several parasitic effects which limit the energy at high repetition rate. In order to minimize those effects we have used the concept of single crystal fibers developed in a close collaboration between the Laboratoire Charles Fabry and the company Fibercryst. The specific geometry of single crystal fibers, merging the advantages of bulk crystals and optical fibers, allows us to overcome limits of current laser sources. On the other part, material processing require near-infrared pulsed laser sources (1 µm) with high pulse energy, high average power and high peak power. In such laser sources, the amplifying medium must be design to avoid both thermal effects and non liner effects. For this purpose, we used neodymium doped single crystal fibers as power amplifier to enhance the performance of passively q-switched microlasers operating at high repetition rate (1 to 100 kHz) and emitting short pulses (< 1 ns).

Sem resumo / Sem abstract

ABSTRACT PREPARATION AND CHARACTERIZATION OF SILVER SERS NANOTAGS Kibar, Seda M.S., Department of Chemistry Supervisor: Prof. Dr. M&uuml / rvet Volkan December 2010, 88 pages Tags are materials used for labeling substances and so make possible the qualitative and quantitative analysis both in macroscopic and microscopic world. Nowadays, surface enhanced Raman spectroscopy became the favored one among the optical based-tag detection systems. Progress in surface enhanced Raman detection and imaging technologies depends on the availability of Raman labels with strong light scattering characteristics. In this study various SERS nanotags were prepared. An ideal SERS nanotag consists of three parts, core nanoparticle for enhancement, Raman active molecule for signature and a shell for protection and further functionalization. As a core material, silver nanoparticles were prepared using the chemical reduction method with sodium citrate as reductant. SERS enhancement provided by Ag particles prepared was examined. For colloidal stabilization and further surface modifications, silica with a controlled thickness was deposited on Ag nanoparticles. Three single-dye doped nanotags, Ag-BCB@SiO2 Ag-CFV@SiO2 and Ag-CV@SiO2 were prepared using positively charged dyes, brilliant cresyl blue (BCB), cresyl fast violet (CFV) and cresyl violet (CV). The effects of silica thickness and dye concentration in the reaction medium were examined. Stability of prepared nanotags and repeatability of the method were investigated. Multi-dye doped nanotags were prepared using BCB and CFV solutions mixed at various concentration ratios. Resulting Raman spectra Ag-BCB-CFV@SiO2 nanotags successfully exhibited characteristic peaks of each dye with a good resolution. In addition, the molar ratio between dyes BCB and CFV was reflected on the related spectra. A linear correlation was observed between the molar ratio of the dyes and their Raman intensity ratio.

From the time of the unexpected discovery of the insulating nature of NiO by Verwey half a century ago, Oxide materials have continued to occupy the centre stage of condensed matter physics. The recent discovery of high temperature superconductivity in doped cuprates has given a new impetus to the study of the strongly correlated electron systems. Besides, the occurrence of Colossal Magneto-Resistance (CMR) in doped rare earth manganite has also created renewed interest in these rather old systems. Understanding of the rich and complex phase diagram of these materials and their sensitivity to small perturbations e.g. external magnetic field of a few Tesla, temperature, change in isotope etc. are of great theoretical interest and also these materials have many potential technological applications. A common feature of all these oxide materials is that the transition metal ions have partially filled d-shells. Unlike s and p-electrons which gives rise to hybridized Bloch states, the d-electrons retain their atomic nature in a solid. This gives rise to strong Coulomb interaction among d-electrons which may be comparable or more than its kinetic energy. The strong correlation effects are evident from the experimental fact that the undoped parent compounds are insulators rather than metals as suggested by band theory, which favours a metallic state for systems with one electron per unit cell since this gives rise to partially filled bands (and hence a metallic state). These insulators termed Mott insulators, arise solely due to strong electron-electron correlations as compared to the band insulators which arise due to complete filling of one electron bands thereby giving rise to a gap (band gap)in the excitation spectra. The delicate competition between the kinetic energy and the Coulomb energy for d-electrons is broadly responsible for the wide variety of phenomena like Mott metal-insulator transition (MIT), magnetic transitions, charge ordering, orbital ordering, ferro/antiferroelectricity, and most interestingly the observation of high Tc superconductivity in doped cuprates. In this thesis we will restrict our interest to one such class of oxide materials, namely the doped rare earth manganites. In Chapter 1 we give a brief overview of the structure and basic interactions present in the doped manganites. Also, in the same Chapter we give a brief introduction to the phenomenology of manganites, particularly its phase diagram in the doping and temperature plane and various experimental features, e.g. the wide variety of phase transitions and phenomena particularly the observation of CMR, charge ordering and incipient meso-scale phase separations etc.. Then we briefly introduce a recently proposed microscopic model which is believed to be a minimal model which, for the first time, includes the three most important interactions present in the manganites namely the following -1)coupling of the orbitally degenerate eg electrons to local lattice distortions of Jahn-Teller type which gives rise to two species of electrons. The one denoted by by ℓ is associated with Jahn-Teller effects and hence is localized whereas the other denoted by b is an extended state and propagates through the lattice. 2) The strong Hund’s couplingof ℓ and b electrons to the t2g core spin and 3) the strong Coulomb correlation between the two species of electrons. Additionally, the model includes a new doping dependent ferromagnetic exchange between the t2g core spins which can arise from “virtual double exchange” mechanism which will be discussed in great detail in Chapter 1 . Finally, we give a brief account on Dynamical Mean Field Theory (DMFT) and Numerical Renormalization Group (NRG) as an impurity solver for the single impurity problem arising under single site DMFT approximation. In Chapter 2 we study the effect of inter-site ℓ - b hybridization on the ‘ℓ - b’ model. The single impurity problem arising under DMFT approximation has close connection with the Vigman-Finkelshtein (VF)model. Then we briefly introduce the VF model and bring out its close connection with the impurity problem. We consider both the particle-hole symmetric as well as the U → ∞ particle-hole asymmetric cases. We derive various spectral functions at T = 0K and discuss the nature of fixed points under various circumstances. We explicitly show that for the particle-hole symmetric case the Hamiltonian flows from X-ray edge singularity fixed point to Free Electron fixed point under Renormalization Group transformation. This is evident from the spectral properties of the model. We write down the effective Hamiltonian at the free electron fixed point. For the particle-hole asymmetric case the model flows from X-ray edge singularity fixed point to Free Electron/Strong Coupling fixed point with additional potential scattering terms. We write down the effective Hamiltonian at this fixed point and derive various leading order deviations. We found all of them to be irrelevant in nature also most interestingly the quasi-particles describing the under lying Fermi liquid state are found to be asymptotically non-interacting. We also calculate the Fermi liquid parameter, z, by analyzing the energy level structure of a non-interacting Hamiltonian with effective renormalized parameter. Also, we consider the case of ‘self consistent bath hybridization’ without ℓ - b hybridization for Bethe lattice with infinite coordination. Low energy qualitative features are found to be same but some of the high energy features get qualitatively modified. In Chapter 3 we discuss the transport properties of doped manganites in the insulating phases and also the Hall effect in the metallic phase. In the first part of this chapter we calculate the resistivity based on the ‘ℓ - b’model and try to fit it to the semiconducting form: ρ(T )= ρ0(T /T0)−nexp[Δ(T )/kBT ] and extract the “transport gap”, Δ(T ). This gap can be characterized in terms of the “spectral gap” which can be defined for the ℓ - b model. It is found that the transport gap in the paramagnetic phase can be characterized in terms of the near constant “spectral gap” in this phase whereas the same in the ferromagnetic phase can be characterized in terms of the zero temperature spectral gap. In the last part of this chapter we calculate the Hall resistivity (ρxy) of these materials in the metallic phase. Ρxy is found to be negative and linear in applied field -quite consistent with the experimental findings but this fails to explain the positive linear Hall resistivity at low temperatures and its crossover as a function of field and temperature. We then present a reasonable explanation for this discrepancy and support it by calculating the Hall density of states for a two band “toy model” involving inter species hybridization. In Chapter 4 we calculate the optical conductivity, σ(ω), in ℓ - b model. σ(ω) arises from two independent processes. One of the processes involves ‘b’ electrons only and termed as ‘b - b channel’ and this gives rise to a Drude peak in the low frequency region. another process termed as the ‘ℓ - b channel’ involves hopping of an ℓ-electron to a neighbouring empty site and transforms into a ‘b’like state. This process gives rise to a broad mid-infrared peak. The total conductivity is the sum of contributions from these two incoherent channels. Calculated σ(ω) for metallic systems shows lot of similarities with experimental observations particularly the temperature evolution of the mid-infrared peak and the spectral weight transfer between the two peaks. But for the insulating systems the calculated optical conductivity showed trends similar to more recent experimental observations on some insulating systems (x =0.125) but contradicts with earlier experimental observations on some other insulating system (x =0.1). Finally, in the concluding chapter, we summarize results from all the chapters and also sketch some possible future directions of investigations.

A custom-built surface sol-gel pumping system was built for applying conformal sol-gel based coatings with controlled thicknesses on three-dimensional (3-D) nanostructured templates. The 3-D templates utilized in this work were derived from biological species, such as diatoms and butterfly wings, as well as a synthetic photoresist polymer (SU-8). Tin oxide coatings were applied on silica-based diatom frustules using the automated surface sol-gel pumping system. An organic dendrimer method was developed for amplifying hydroxyl groups on the silica-based frustule surfaces to enhance the surface sol-gel deposition process. Conformal tin oxide coatings with controlled thicknesses were obtained on the hydroxyl amplified frustule surfaces; however, little if any deposition was observed on the frustules that were not subjected to the hydroxyl amplification process. The automated surface sol-gel system was also utilized to apply multicomponent tin oxide-doped titania alkoxide chemistries on the wing scales of a blue Morpho butterfly. The alkoxide solutions reacted directly with the OH functionalities provided by the native chitin chemistry of the scales. The tin oxide served as a rutile nucleating agent which allowed the titania to completely crystallize in the high refractive index rutile titania phase with doping concentrations of tin oxide as low as 7 mol % after annealing at 450oC. The tin oxide-doped titania coatings were both nanocrystalline and nanothick and replicated the nanostructured scales with a high degree of precision. Undoped titania coatings applied on the scales required a heat treatment of 900oC to crystallize the coating in the rutile titania phase which led to adverse coarsening effects which destroyed the nanostructed features of the scales. Tin oxide-doped titania coatings were also deposited on 3-D SU-8 photonic crystal structures. The coating was crystallized in an acidic solution at 80oC which led to the formation of rutile titania inverse opal photonic crystal structures which maintained the overall structure and ordering of the template. Barium titanate and europium-doped barium titanate coatings were applied on diatom frustules using a conventional reflux/evaporation deposition process. The silica-based diatom frustules had to first be converted into magnesia/silicon composite replicas using a gas/solid displacement reaction to render the template chemically compatible with the barium titanate-based coating. Conformal titanate-based coatings were obtained on the magnesia frustule replicas possessing uncontrolled thicknesses and excess inorganic particles using the reflux/evaporation deposition process. The europium-doped barium titanate coated frustules exhibited bright red photoluminescent properties upon stimulation with an ultraviolet light source.

Sem resumo / Sem abstract

Nitrogen-doped (N-doped) porous carbons have drawn increasing attention due to their high activity for electrochemical catalysis, and high capacity for lithium-ion (Li-ion) batteries and supercapacitors. So far, the controlled synthesis of N-enriched ordered mesoporous carbons (N-OMCs) for Li-ion batteries is rarely reported due to the lack of a reliable nitrogen-doping protocol that maintains the ordered mesoporous structure. In order to realize this, in this work, ordered mesoporous carbons with controllable N contents were successfully prepared by using melamine, F127 and phenolic resin as the N-source, template and carbon-source respectively via a solvent-free ball-milling method. The as-prepared N-OMCs which showed a high N content up to 31.7 wt% were used as anodes for Li-ion batteries. Remarkably, the N-OMCs with an N content of 24.4 wt% exhibit the highest reversible capacity (506 mA h g−1) even after 300 cycles at 300 mA g−1 and a capacity retention of 103.3%. N-OMCs were also used as electrode materials in supercapacitors and a capacity of 150 F g−1 at 0.2 A g−1 with stable cycling up to 2500 times at 1 A g−1 was achieved. These attractive results encourage the design and synthesis of high heteroatom content ordered porous carbons for applications in the field of energy storage and conversion.