The cabin environment of a commercial aircraft, including cabin layout and the quality of air supply, is crucial to the airline operators. These aspects directly affect the passengers’ experience and willing to travel. This aim of this thesis is to design the cabin layout for flying wing aircraft as part of cabin environment work, followed by the air quality work, which is to understand what effect the ECS can have in terms of cabin air contamination. The project, initially, focuses on the cabin layout, including passenger cabin configuration, seat arrangement and its own size due to the top requirements, of a conventional aircraft and further into that of a flying wing aircraft. The cabin work in respect of aircraft conceptual design is discussed and conducted by comparing different design approaches. Before the evaluation of cabin air quality, an overall examination of the main ECS components involved in the contaminants access will be carried on and, therefore, attempt to discover how these components influence the property of the concerned contaminants. By case study in the B767 ECS, there are some comments and discussions regarding the relationship between the cabin air contaminations and the passing by ambient environment. The thesis ends up with a conclusion explaining whether or not the contaminated air enters the occupants’ compartments on aircraft and proposing some approaches and engineering solutions to the continue research.

The present thesis deals with the analysis of Environmental Control System (ECS) as a part of the aircraft conceptual design. The research focuses on developing methods for modelling, simulation and optimization of current and future cooling technologies suitable for aircraft applications. The work started with a pre-study in order to establish the suitability of different cooling technologies for ECS application. Therefore, five technologies namely, Bootstrap (BS), Reverse-Bootstrap (RBS), vapour cycle system (VCS), magnetic cooling (MC) and thermo-electric cooling (EC), were assessed from a theoretical point of view by the method of benchmarking. This resulted into the selection of three most suitable technologies that were further modelled and simulated in Dymola. In order to compare the optimum designs for each technology, the models were optimized using the modeFRONTIER software. The comparison was performed based on the optimum ratio of maximum power of cooling and minimum fuel penalty. The results showed that VCS has the “best” performances compared to BS and RBS. In addition to the active technologies, passive cooling methods such as liquid cooling by means of jet-fuel and poly-alpha-olefin were considered to address high heat transfer rates. In order to apply the cooling technologies in the ECS, concept system architectures were formulated using the functional analysis. This led to the identification of basic functions, components and sub-systems interaction. Based on the comparison carried out previously and the functional analysis, two ECS architectures were developed. Design optimization procedure was applied further in order to assess each concept and also to study the differences between the two concept architectures. The results depict the complex interaction of different key parameters of the architectures and their influence on the outcome. The study culminated with a proposed methodology for formulation of systems architecture using information from the optimization results and a robust functional analysis method. To sum up, the thesis proposes a simulation-based optimization method that allows inclusion of ECS system in aircraft conceptual design phase. The study also proves the complexity of the conceptual design stage for ECS architectures which highly influences the design of the combat aircraft.