The aim of this thesis was to ascertain with the measurement methods of passive optical networks and the creation of a simulation model that corresponds to the measured network and comparison of results. The first chapter deals with Triple Play services, which are focused on different services (transmission of television signals, voice and data transmission). Each service consists of a subchapter and presents a detailed description of the parameters associated with the transmission. The second chapter of the theoretical part consists of an analysis of passive optical networks according to termination method of FTTx optical fiber. Partial part of this chapter consists of description of standard passive optical networks APON, BPON, GPON and EPON. The EPON standard is explained in detail. The theoretical part of the thesis is concluded with a description of active elements that will form the laboratory measured network. Testing of designed passive optical network is performed in the practical part of the thesis. The measurement is divided into two chapters. The first chapter consist of measuring of the „inanimate network“, as there are missing active elements in the nominated net. Network measurements were done by a direct measuring method and reflectometric method. The second chapter of the practical part consists of measuring the parameters of quality of service (QoS). This chapter is divided into subchapters, such as: the measurement using RFC 2544 standard, the measurement using ITU-T standard Y.156 (EtherSam) and bit error rate testing (BERT). The practical part ends with a designed simulation network model, which was proposed in OptSim 5.2. The aim of the simulation model was to maximally resemble a real network, due to result comparison.

The diploma thesis is focused on design of new laboratory exercises on the topic of gigabit passive optical networks. The theoretical analysis is devoted to acquaintance with basic problematics of PON and analysis of individual PON standards. Special attention, besides GPON, XG-PON and EPON standards, is devoted to security issues in PON. The goal of practical section of the thesis is the design of four laboratory exercises. Two exercises are focused on configuring GPON and XG-PON networks in a console environment with the help of exemplary console commands. The goal of the third exercise is to hook up and configure an EPON network using web configuration interface. The fourth exercise is designed for a realization of DoS attack against a fully functioning laboratory GPON network. The objective is to jam the upstream communication bandwidth with laser transmission causing a desynchronization between active network elements.

A new class of materials, known as multi-functional energetic structural materials (MESMs), has been developed. These materials possess both strength and energetic functionalities, serving as candidates for many exciting applications. One of such applications is ballistic missiles, where these materials serve as part of structural casing as well as explosive payload. In this study, the dynamic compressive behavior of two types of MESMs in the intermediate strain rate regime is investigated. The first type is a thermite mixture of Al and Fe₂O₃ particles suspended in an epoxy matrix. The second type is a shock compacted mixture of Ni and Al powders. Compression experiments on a split-Hopkinson pressure bar (SHPB) apparatus are carried out at strain rates on the order of 103 s-1. In addition, a novel method for investigating the dynamic hardness of the Al + Fe₂O₃ + Epoxy materials is developed. In this method, high-speed digital photography is used to obtain time-resolved measurements of the indentation diameter throughout the indentation process. Experiments show that the shock compacted Ni-Al material exhibits a rather ductile behavior and the deformation of the Al + Fe₂O₃ + Epoxy mixtures is dominated by the polymer phase and significantly modulated by the powder phases. The pure epoxy is ductile with elastic-plastic hardening, softening, and perfectly plastic stages of deformation. The Al and Fe₂O₃ particles in Al + Fe₂O₃ + Epoxy mixtures act as reinforcements for the polymer matrix, impeding the deformation of the polymer chains, alleviating the strain softening of the glassy polymer matrix at lower levels of powder contents (21.6 - 29.2% by volume), and imparting the attributes of strain hardening to the mixtures at higher levels of powder contents (21.6 - 49.1% by volume). Both the dynamic and quasi-static hardness values of the Al + Fe₂O₃ + Epoxy mixtures increase with powder content, consistent with the trend seen in the stress-strain curves. To quantify the constitutive behavior of the 100% epoxy and the Al + Fe₂O₃ + Epoxy materials, the experimentally obtained stress-strain curves are fitted to the Hasan-Boyce model. This model uses a distribution of activation energies to characterize the energy barrier for the initiation of localized shear transformations of long chain polymeric molecules. The results show that an increase in powder content increases the activation energy, decreases the number of transformation sites, causes redistribution of applied strain energy, and enhances the storage of inelastic work. These effects lead to enhanced strength and strain hardening rate at higher levels of powder content.

Diplomová práce popisuje fyzikální principy mikroskopů TEM, SEM a STEM spolu s jejich vhodností pro pozorování vzorků citlivých na elektrony, jako jsou zalévací média či biologické vzorky. Dále je popsána příprava vzorků pro STEM (TEM) a popis interakcí, ke kterým dochází mezi primárním elektronovým svazkem a vzorkem. Součástí práce je také pojednání o zpracování mikroskopických obrazů s podkapitolou o metodách kvantitativního porovnání obrazů ze STEM. Praktická část práce je zaměřena zejména na měření úbytku hmoty zalévacích médií (Epon, Spurr, LR White) způsobený primárním svazkem elektronů v nízkonapěťovém STEM. Ultratenké řezy několika tlouštěk byly zkoumány při různých nastaveních mikroskopu (urychlovací napětí, celková dávka, proud svazku, čištění povrchu vzorku a komory mikroskopu) a zobrazovacích módech (světlé a tmavé pole). Dále jsou zkoumány také biologické vzorky Krásnoočka štíhlého (Euglena gracilis) zalitého v pryskyřicích Epon a Spurr. Nasbírané snímky, vytvořené algoritmy a získané výsledky jsou diskutovány a zhodnoceny.

When laying up dry composite materials and aligning the fibers in the appropriate directions it can be a challenge due to the dryness of the fiber and mold design. Several commercial products are available to help fix plies to molds keeping the proper fiber orientation depending upon mold geometry. Prepreg and wet layups do not have this problem due to the inherent inclusion of a matrix in their manufacturing, dry materials have no added epoxy at the time of layup and are therefore in need of assistance maintain position. The purpose of this research is to determine if Super 77™ or EPON™ 2002 increases or decreases mechanical properties of the neat resin and composite laminates; if the increase or decrease is dependent upon the type of epoxy, and if the amount of applied tackifier can be optimized towards a high or low application quantity to minimize any detrimental effects to mechanical properties. Each tackification agent was applied in high and low concentrations to eight composite panels, with two control panels. The EPON™ was applied manually and set with heat exposure while the Super 77™ was sprayed from an aerosol can. The Super 77™ plies were stacked and pressed by hand while the EPON™ plies were stacked and ironed together to create panels, which were then infused with one of two room temperature infusion epoxies, MVS 610 or INF 114. The panels were then cut to specimen size for testing. Neat resin specimens were cast in silicone molds with high and low concentrations of tackifiers and allowed to cure for 12 hours at room temp, then heated to 60° C for 8 Both Super 77™ and EPON™ 2002 reduced the SBS for both epoxies, but Super 77™ reduced the short beam shear more than EPON™ 2002. The modulus of the neat resin cast specimens with high concentration were between 0 to 20% lower than neat resin with no tackifier; the tensile strength was increased for those specimens with Super 77™ and lower for those with EPON™ 2002. Similarly, the Charpy test resulted in higher values for Super 77™ than for EPON™ 2002. The effects of Super 77™ and EPON™ 2002 are complex and varied depending on application concentration, resin, and tackifier type; but the addition of any tackifier reduces mechanical properties from non-tackified laminates.

Dans ce travail de thèse, un aperçu général sur les systèmes PON est présenté et sont étudiés les mécanismes et classification PON existants. Après, nous introduisons notre première contribution qui est un algorithme d'allocation dynamique de bande passante pour EPON. Cet algorithme proposé est désigné comme «hcDBA». Par la suite, une amélioration de l'algorithme de hcDBA avec mécanisme de prédiction précoce est présentée. Notre simulation montre bien que notre algorithme hcDBA est performant comparé aux mécanismes existants en termes de taux de perte de paquets et de délai d’accès. Dans notre seconde contribution, nous sommes intéressés au problème de consommation d’énergie qui est un sujet d’actualité dans les réseaux de télécommunication. Les études montrent aujourd’hui que les réseaux d'accès constituent une partie remarquable de la consommation totale d'énergie dans les réseaux de télécommunication. Les organisations ITU-T et IEEE ont publié la recommandation pour la conversation de l'énergie pour les réseaux PONs. Bien que, la consommation totale d'énergie des nœuds ONU est plus importantes que d'autres équipements dans le réseau d'accès fixe, les normes et la plupart des travaux de recherches ont porté sur les économies d'énergie du côté de ONU. Dans cette thèse, nous sommes concentrés sur une méthode d'efficacité énergétique basée sur la conservation de l'énergie du côté de l’OLT. La méthode proposée permet d’économiser de l'énergie en déplaçant dynamiquement des cartes d’OLT en mode de sommeil profond en fonction des charges de trafic entrant et sortant / In this thesis, general overview about PON systems is presented and existing PON mechanisms and classification are investigated. After, a novel dynamic bandwidth allocation algorithm for EPON is introduced. This proposed algorithm is named as “Half Cycling Dynamic Bandwidth Allocation-hcDBA” by the inspiration of its half cycling processing mode. Later, an improvement of hcDBA algorithm with early prediction mechanism is presented. As a result statement of the study, hcDBA algorithm performs better than existing mechanism in terms of packet loss ratio and access delays. Beside, simulation traffic behavior of EPON’s upstream channel has been investigated in order to support the decision of selecting suitable traffic generator in further studies. Energy conversation is one of the hot topics in telecommunication networks. Access networks constitute remarkable portion of the total energy consumption in telecommunication networks. ITU-T and IEEE organizations published recommendation for energy conversation in PONs. While, total energy consumption of ONUs is more than other equipment in fix access network the standards and most of the researches focused on saving energy at ONU side. In this thesis I focused on an energy efficiency method based on energy conversation on OLT side. The proposed method save energy by dynamically moving OLT cards to deep sleep mode according to the incoming and outgoing traffic loads

Η επιθυμία του ανθρώπου για ποιοτική και αδιάκοπη επικοινωνία, έχει ωθήσει την τεχνολογία να κάνει άλματα εξέλιξης. Η συνεχής ανάπτυξη των απαιτήσεων των χρηστών των τηλεπικοινωνιακών δικτύων, καθιστά αναγκαία την ανανέωση των τεχνολογιών και ιδιαίτερα την αύξηση του παρεχόμενου εύρους ζώνης, ώστε να συμβαδίζει με τις ανάγκες τους. Γι’αυτό το λόγο τα τελευταία χρόνια έχουν εμφανιστεί οι οπτικές ίνες, που με τα πλεονεκτήματα που παρουσιάζουν, κερδίζουν ολοένα και περισσότερο τις αγορές και τους καταναλωτές. Στην παρούσα διπλωματική παρουσιάζονται τα πλεονεκτήματα και οι τεχνολογίες που χρησιμοποιεί ένα δίκτυο βασισμένο σε οπτικές ίνες (παθητικό οπτικό δίκτυο – PON). Εξετάζεται τόσο η τεχνολογία TDMA, όσο και η WDMA στα PONs. Η μελέτη γίνεται πάνω στο πρότυπο ΕΡΟΝ (Ethernet-PON), που ορίστηκε ως το καταλληλότερο συγκριτικά με άλλα παρόμοιά του. Πιο συγκεκριμένα, εξετάζεται η διάθεση εύρους ζώνης στο ανοδικό κανάλι (από τον χρήστη προς το τηλεπικοινωνιακό κέντρο) στα συστήματα ΕΡΟΝ και τι αποτελέσματα και συμπεράσματα μπορούν να ληφθούν. Αρχικά, αναφέρεται μια προηγούμενη μελέτη ενός ΕΡΟΝ η οποία κάνει χρήση του αλγορίθμου IPACT, της περιορισμένης υπηρεσίας (limited service) του αλγορίθμου και υποστηρίζει μονοδιάστατη ανοδική κίνηση δεδομένων. Το δίκτυο ΕΡΟΝ μοντελοποιείται και προσφέρει αποτελέσματα ύστερα από μαθηματική ανάλυση με χρήση της γλώσσας προγραμματισμού C, καθώς και αποτελέσματα με τη χρήση της γλώσσας προσομοίωσης SIMSCRIPT II.5. Στη συνέχεια, περιγράφεται και μοντελοποιείται ένα δίκτυο ΕΡΟΝ που κάνει χρήση της σταθερής υπηρεσίας (fixed service) του αλγορίθμου IPACT και υποστηρίζει πολλαπλές κατηγορίες υπηρεσιών ανοδικής κίνησης δεδομένων με διαφορετικές προτεραιότητες. Και σε αυτή την περίπτωση, το δίκτυο ΕΡΟΝ προσφέρει αποτελέσματα τόσο από ένα αναλυτικό μοντέλο, όσο και από ένα μοντέλο προσομοίωσης. Τέλος, περιγράφεται και μοντελοποιείται ένα δίκτυο όμοιο με το προηγούμενο δίκτυο ΕΡΟΝ, με τη διαφορά να έγκειται στη χρήση της τεχνολογίας WDM στο ΕΡΟΝ. Η μελέτη σε αυτό το τμήμα της εργασίας γίνεται με χρήση επίσης της σταθερής υπηρεσίας (fixed service) του αλγορίθμου IPACT και υποστηρίζει πολλαπλές κατηγορίες υπηρεσιών ανοδικής κίνησης δεδομένων με διαφορετικές προτεραιότητες. Με αυτόν τον τρόπο επιτυγχάνεται μια σημαντική αύξηση του διαθέσιμου εύρους ζώνης του ανοδικού καναλιού που προσφέρεται στους χρήστες. Για άλλη μια φορά παρουσιάζονται αποτελέσματα ύστερα από ανάλυση και προσομοίωση του μοντέλου, με χρήση, όπως και προηγουμένως, της γλώσσας προγραμματισμού C και της γλώσσας προσομοίωσης SIMSCRIPT II.5. Τα συμπεράσματα που εξάγονται, ύστερα από τις παραπάνω μελέτες, είναι άξια προσοχής. / In the past few years technology, in the communication field, has made great progress due to the fact that people desire more and more good quality of service. The continuous demand for development of the subscribers using the telecommunication services, necessitates the technological renewal and especially the increase of the available bandwidth. For this reason, optical fibers have appeared in the networking field and they are becoming more known by the users and in the market every day. In this dissertation the advantages and the technologies a network, based on optical fiber uses, are presented. An optical fiber network it is also called Passive Optical Network (PON). The TDMA (Time Division Multiplexing Access) and WDMA (Wavelength Division Multiplexing Access) technologies are examined. The study is based on an EPON (Ethernet-PON) standard, which was chosen as the most suitable among others. More specifically, the available upstream (from the users to the Central Office) bandwidth in an EPON model and the results that can be deduced are examined. In the beginning, a previous study of an EPON which uses the IPACT (Interleaved Polling with Cycle Time) algorithm is reported. The EPON network uses the limited service of the IPACT algorithm and supports a single rate. A specific model of an EPON network is studied and results using the C programming language and the simulation language SIMSCRIPT II.5 are given. Moreover, an EPON network which uses the fixed service of the IPACT algorithm which supports a multi-rate upstream with different priorities is described and modeled. In this case as well, the EPON model network gives results based on analysis and simulation. In the end, a same EPON network, as the one described before, is studied and modeled having as a difference that a WDM technology is used. The fixed service of the IPACT algorithm is used and a multi-rate upstream with different priorities are supported again. With this different technology, an important increase in the available upstream bandwidth which is provided to the users is accomplished. Once again, the results are presented after an analysis and a simulation of the model, using the programming language C and the simulation language SIMISCRIPT II.5. The extracted results which the models can offer are worthy of attention.