This thesis with title "Children's Group - Benefit for both, Parents & Child in the age of two up to three years" deals with nowadays actual social topic, which is placement of children of early age to outside-family institutions. The thesis is divided into two parts. The main task of the first, theoretic part, is to gather and work with all information, which might be used for the topic of work and which might be found in all available literature. The attention is focused onto family with a small child, on current form of such a family and factors, which influence education of the child and its involvement into the society. This part deals also in a detailed way with all family members. With a child, with its needs and possibilities of meeting those needs. It deals also with roles of mother and father, who together and responsibly approach to the education of the child and who, at a same time, try to combine family and career life in the most appropriate way. One of the sections of theoretic part of the thesis brings also an overview of a current situation in society in this field of interest. Particularly on system of family-supportive arrangements offered by the state and on possibilities for parents and their children in its utliziation, and with detailed description of all available forms of...

1 ABSTRACT The diploma work titled "The parents', teachers' and day care center staff view on possibility of placing two-year-old children in nursery schools" analyzes the specifics and problems of today's families with young children. It defines the concept of early childhood, describes a child's development at toddler age, and also characterizes today's toddler. The work is dedicated to the maturity of children for entry into nursery schools. Furthermore the diploma work describes the history and current problems of the care for children younger than three years in the Czech Republic in comparison with representative European countries. The diploma work is a survey focused on three categories of respondents' views on the possibility of inclusion of children from two years of age in nursery schools as a plan for future solution of the issue of systemic agenda of day care center for children under three years of age in the Czech Republic. The aim of the research was to find out how the surveyed parents, nursery workers and preschool teachers perceive the possibility of inclusion of two-year-old children in pre-primary educational institutions and whether today's two-year-old children are ripe for entry into nursery schools. In the practical part of the diploma work there were also compared the personal...

A l’heure actuelle où la préservation de notre environnement est primordiale, les constructions en béton font intervenir de plus en plus des ciments comprenant des ajouts minéraux, tels que le laitier, les cendres volantes… En effet, la production des ciments composés permet de réduire le dégagement des gaz à effets de serre et de réutiliser des déchets industriels. Les bétons formulés à base de ciment au laitier de haut-fourneau (CEM III) sont également largement utilisés suite à leur bonne résistance aux réactions alcali-silices, à la diffusion des chlorures et aux attaques sulfatiques… Cependant, certains ouvrages construits avec ce type matériau ont présenté au jeune âge des problèmes de fissuration liés à la restriction de leurs déformations différées, telles que le retrait endogène, thermique et de dessiccation. Suite à cette observation, des essais préliminaires ont été réalisés au laboratoire du service BATir de l’Université Libre de Bruxelles. Ils ont mis en avant plusieurs caractéristiques du comportement de ces matériaux : 1. Lors du suivi du retrait restreint à l’aide de l’essai à l’anneau en condition de dessiccation, le béton formulé à base de ciment au laitier de haut-fourneau a fissuré bien avant le béton formulé à base de ciment Portland. 2. Le retrait total en condition libre du béton formulé à base de ciment au laitier de haut-fourneau est nettement supérieur à celui du béton formulé à base de ciment Portland. Cette différence de comportement est principalement due à l’accroissement rapide et plus élevé du retrait endogène des bétons formulés à base de ciment au laitier de haut-fourneau. Au vu de ces résultats expérimentaux, il a semblé intéressant de déterminer quel était l’impact de la déformation endogène des bétons formulés à base de ciments au laitier de haut-fourneau (CEM III) sur leur sensibilité à la fissuration. Afin de répondre à cette question, les déformations différées (retrait endogène, fluage propre en compression et en traction) au jeune âge de trois compositions de béton avec différentes teneurs en laitier (0, 42 et 71%) ont été étudiées expérimentalement en conditions libre et restreinte. Cependant, le suivi du retrait endogène libre et restreint a nécessité le développement de plusieurs dispositifs expérimentaux limitant au maximum les artefacts de mesure, tels que la TSTM (Temperature Stress Testing Machine). De plus, l’interprétation de ces résultats expérimentaux a également nécessité une caractérisation du comportement de ces matériaux à l’échelle macro- et microscopique. Finalement, cette étude a montré que malgré une déformation endogène plus élevée, les bétons formulés à base de ciment au laitier de haut-fourneau fissurent après le béton formulé à base de ciment Portland. Ce comportement est dû à : -l’impact du laitier sur la réaction d’hydratation du matériau cimentaire ; -la présence d’une expansion de la matrice cimentaire des bétons formulés à base de ciment au laitier de haut-fourneau au jeune âge qui retarde l’apparition des contraintes de traction au sein du matériau ; -la plus grande capacité de ces matériaux cimentaires à relaxer les contraintes de traction/ Today, the use of concretes with mineral additions (fly ash, slag) for civil engineering structures is spreading worldwide. Indeed, the production of blended cements is more respectful of the environment than the production of Portland cement, because it allows reducing greenhouse gas emissions and using industrial wastes. Slag cement concretes are also largely used for their good resistance to alkali-silica reactions, sulphate attacks and chloride diffusion. However, some of constructions built with slag cement concretes have exhibited cracking at early age due to their restrained deformations, such as thermal, autogenous and drying shrinkage. Following these observations, a preliminary experimental study was realized in the laboratory of BATir Department at ULB. It revealed several characteristics of the behaviour of slag cement concretes: 1. The study of restrained deformations under drying conditions by means of ring tests showed that the slag cement concretes seem more prone to crack than the Portland cement concretes; 2. The total free shrinkage for slag cement concrete is clearly larger than for Portland cement concrete. This difference of behaviour is mainly due to the fast and large increase in the autogenous deformation of the slag cement concrete. Following these experimental results, the effect of the autogenous deformation on the cracking sensibility of slag cement concretes seemed interesting to investigate. Their deformations (autogenous deformation, compressive and tensile basic creep) have been studied at early age for three concretes characterized by different slag contents (0, 42 and 71%) under free and restrained conditions. For monitoring free and restrained autogenous deformations, several test rigs aimed at limiting artefacts were designed, like the TSTM (Temperature Stress Testing Machine). Moreover, the behaviour of these concretes was also characterized by a study at a macro- and microstructure scale. Finally, this study shows that the slag cement concretes under sealed and fully restrained conditions crack later than the Portland cement concrete, despite the fact that they are characterized by the largest autogenous deformation. This behaviour is due to: - the slag effect on the hydration reaction of cementitious material; - the cement matrix expansion of the slag cement concretes at early age which delays the occurrence of tensile stresses inside the material; - the largest capacity of this concrete to relax tensile stresses.

La fissuration d’éléments minces en béton dès le jeune âge correspond à une réalité observée sur des ouvrages en construction. Cette fissuration concerne des bétons courants de bâtiments, pour lesquels les matériaux de qualité optimale ne sont pas toujours disponibles, en particulier au niveau des granulats. Le but de cette thèse est de définir une approche expérimentale d’étude de ces phénomènes et de proposer des interprétations pour les sensibilités relatives à la fissuration en fonction de la nature des granulats et de leurs taux de saturation initiaux. La sensibilité des moyens de mesures existants conçus pour des bétons spéciaux (BAP et BHP) a d’abord dû être<p>vérifiée. Un nouveau dispositif expérimental a été développé dans le but de mieux décrire l’évolution de la résistance et de la capacité de<p>déformation en traction du béton jeune. Les indicateurs globaux (macroscopiques) apparaissent plus sensibles que les indicateurs de la microstructure pour rendre compte des différences de comportement observées. L’évolution du module élastique, du retrait plastique et endogène corrélées à l’évolution de la capacité de déformation et de la résistance en traction permettent de mieux caractériser le risque<p>potentiel de fissuration par retrait empêché. La fin de prise correspond à une phase critique. L’influence de la saturation des granulats est<p>indirecte, et résulte des variations du rapport Eau d’ajout/Ciment, à rapport Eau efficace/Ciment constant. La nature des granulats intervient au niveau des évolutions relatives de la résistance en traction et du module élastique. La méthodologie peut être appliquée à l’étude d’autres types de bétons et d’autres paramètres de formulation. / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished

Introduction: The arrival of a child with multiple disabilities (MD) in a family is a difficult situation. Increased stress of parents of (MD) is often related to the non-fulfillment of the needs, leads to frustration and deprivation that can result in serious health problems. The aim is the subjectively defined and described life with a child (MD), focusing on the needs of these parents resulting from the daily care of the child. Aim: Identify, describe and analyze the needs of parents of children with MD at an early age. Methods: Qualitative approach using the biographical narrative method. The research design is a case study. Methodological triangulation: three methods of collecting data: biographical curve, in-depth interview, Cantril's ladder. Results: all cases were compared with each other. 12 parents' needs were identified. The Cantril's ladder method found significantly unmet needs: Need for rest and Need for medical care. Conclusion: The main contribution of the work is to understand the individuality and needs of parents of children with multiple disabilities, as a possibility to provide purposefully individualized early intervention, to streamline the process of planning, implementation and evaluation of provided care and thus contribute to the quality of life of the whole family.

The heat development that occurs due to the hydration of cement is important to consider during casting of massive concrete structures. By using computer programs that are based on finite element methods (FEM), simulations can be performed on the heat- and strength development. In this project, a FE program called ConTeSt has been used in order to predict the temperature- and strain development in a massive concrete wall. If the potential risks in a concrete structure are evaluated before casting, economical savings, including a better casting plan could be obtained. The structure under investigation was a concrete wall behind one of the spillways in the hydro power dam of Storfinnforsen. Due to a re-construction of the wall, an opportunity occurred to develop a measurement plan of the casting and perform simulations on the wall. A sensitivity analysis was performed in order to investigate the effects on the temperature- and strain development, by varying the cement content, ambient temperature, wind speed and degree of restraint in translation. The results showed, that a higher cement content increased the rate of hydration and hence the temperature in the concrete. Higher wind speeds contributed to more cooling of the concrete which, in some cases, resulted in cracking due to contraction of the material. Cracking due to contraction also occurred when the ambient temperature was decreased. The ambient temperature did not have a significant impact on the rate of hydration, but instead the impact was larger from the initial temperature of the fresh concrete. A higher initial temperature of the fresh concrete increased the rate of hydration, which increased the temperature in the material. The degree of restraint could only be varied in translation in ConTeSt and hence the effect on the strain development was not that significant. A crack risk analysis was performed where the developed tensile stresses were compared with the tensile strength of the concrete. The same factors were varied as in the sensitivity analysis. The results showed that the tensile strength was exceeded for most of the cases and thus that the crack risk was high. The required equipment, in order to perform the measurements on site, consisted of 7 strain gauges of the module KM-100B from TML Tokyo Sokki Kenkyujo, 2 data loggers of the module Spider-8 from HBM, at least a 25 m ø9 mm 5-core shielded cable and a computer with the software Catman Easy. / Värmeutvecklingen som uppstår på grund av hydratationen av cement är viktig att beakta vid gjutning av massiva betongkonstruktioner. Detta brukar göras genom simuleringar av värmeutvecklingen och hållfasthetstillväxten med hjälp av olika finita element (FE) program. I detta projekt har programmet ConTeSt använts för att på förhand kunna förutse temperatur - och töjningsutvecklingen i en massiv betongvägg. I och med detta kan bl.a. gjutningen planeras bättre samtidigt som ekonomiska besparingar kan åstadkommas om eventuella risker kan kartläggas innan gjutningen påbörjas. En ledmur bakom ett av utskoven i Storfinnforsens kraftverk undersöktes närmare i samband med en ombyggnad. Möjligheten uppstod att planera en mätning av gjutningen av ledmuren samt att utföra simuleringar av väggen i ConTeSt. En känslighetsanalys utfördes för att undersöka effekterna på temperatur- och töjningsutvecklingen genom att variera cementhalten, omgivningstemperaturen, vindhastigheten och graden av tvång i förskjutningen i längdriktningen av väggen. Resultaten visade att högre cementhalter ökade graden av hydratation vilket ökade temperaturen i betongen. Högre vindhastigheter bidrog till snabbare kylning av betongen vilket i vissa fall lett till sprickor på grund av kontraktion av materialet. Sprickor till följd av kontraktion uppstod även då omgivningstemperaturen sänktes. Omgivningstemperaturen hade ingen större påverkan på hydratationen, utan istället var det temperaturen av den färska betongmassan som visade större påverkan. Högre temperatur av den färska betongmassan ökade graden av hydratation vilket ökade temperaturen i betongen. Graden av tvång kunde i ConTeSt endast varieras i förskjutningen i längdriktningen av väggen vilket inte hade någon större effekt på töjningsutvecklingen. En sprickrisk analys utfördes där den utvecklade dragspänningen jämfördes med draghållfastheten. Analysen utfördes genom att variera samma faktorer som varierades i känslighetsanalysen. Resultaten visade att draghållfastheten överskreds i de flesta fall och att därmed sprickrisken var hög. För att genomföra mätningen blev slutsatsen att det behövs 7 st töjningsgivare av modell KM-100B från TML Tokyo Sokki Kenkyujo, 2 st data logger av typ Spider8 från HBM samt minst en 25 m ø9 mm skärmad 5-kärnkabel, inklusive en dator med programvaran Catman Easy.

The autogenous shrinkage due to self-desiccation of high- and ultra-high performance concretes with very low water-cement ratio in case of restraint leads to considerable stresses starting from very early age. The resultant risk of cracking presently cannot be adequately investigated. Parameters that are particularly difficult to capture experimentally are the concrete temperature and the viscoelasticity. The primary objective of this work was to assess as precise as possible the autogenous shrinkage cracking propensity of representative concretes at strong restraint and constant room temperature. Test methods needed to be chosen and enhanced in a way that preferably allowed for the efficient and precise investigation of all relevant factors in the future. Ideally, a method suitable for a complete empirical modeling was provided. First the methodological requirements and the advantages and disadvantages of existing test methods were discussed. Based on this, optimized test methods were proposed. Their suitability was verified using the example of ultra-high strength concrete. The choice of concrete compositions considered the essential measures for reducing shrinkage (internal curing, shrinkage-reducing admixtures, reduction of the fraction of Portland cement in the binder). The autogenous shrinkage was measured with the shrinkage cone method. This new test method was validated by investigations of the repeatability and reproducibility and proved efficient and precise. It allows for measurements under non-isothermal conditions; no established test method exists for that purpose to date. The autogenous shrinkage of the ultra-high strength concretes at the age of 24 h, investigated under quasi-isothermal conditions (20 °C), was between 0,25 mm/m and 0,70 mm/m. It was particularly low when a shrinkage-reducing admixture was added and when superabsorbent polymers were used. The stresses due to restraint were determined with the restrained ring test. A large part of the stresses to be expected according to Hooke’s Law were eliminated by creep and relaxation. The relaxation capacity being very pronounced at very early age was the main reason that no visible cracking occurred, not even with the concretes with high autogenous shrinkage. The development of the autogenous shrinkage cracking propensity was described as ratio of restraint stress and splitting tensile strength. By means of modified ring tests, used to determine the maximum tensile stress, it could be shown that the ratio of stress to strength is an appropriate failure criterion. However, the cracking propensity can be calculated correctly only if the strongly age-dependent ratio of uniaxial to splitting tensile strength is accounted for. Besides, it needs to be considered that at very early age a plastic stress redistribution may occur in restrained ring tests. The reference concrete showed a high cracking propensity of up to 0.68. The fact that shrinkage-reducing measures led to significantly lower values reveals their relevance for the safe application of ultra-high strength concrete. However, the investigations carried out here at 20 °C do not allow for a final assessment of the cracking propensity under typical on-site conditions. To empirically model the autogenous shrinkage cracking propensity as a function of temperature and stress level in the future, an analytical stress solution for non-isothermal restrained ring tests and a new approach for investigating the residual stress and relaxation capacity by means of non-passive restrained ring tests was suggested. / Das durch Selbstaustrocknung verursachte autogene Schwinden von besonders leistungsfähigen Betonen mit sehr niedrigem Wasserzementwert führt bei Dehnungsbehinderung bereits in sehr frühem Alter zu erheblichen Zwangsspannungen. Die Gefahr der Rissbildung, die sich daraus ergibt, lässt sich bislang nur unzureichend untersuchen. Experimentell besonders schwer zu erfassende Faktoren sind die Betontemperatur und die Viskoelastizität. Das vorrangige Ziel der Arbeit war die möglichst genaue Ermittlung der autogenen Schwindrissneigung repräsentativer Betone bei starker Dehnungsbehinderung und konstanter Raumtemperatur. Dabei waren die Prüfverfahren möglichst so zu wählen und weiterzuentwickeln, dass sich zukünftig alle relevanten Faktoren effizient und genau untersuchen lassen. Im Idealfall sollte eine Methode entstehen, die eine vollständige empirische Modellierung erlaubt. Zunächst wurden die methodischen Anforderungen und die Vor- und Nachteile existierender Prüfverfahren diskutiert. Darauf aufbauend wurden optimierte Verfahren vorgeschlagen. Ihre Eignung wurde an ultrahochfestem Beton überprüft. Bei der Auswahl der Betone wurden die wesentlichen Maßnahmen zur Schwindreduzierung berücksichtigt (innere Nachbehandlung, schwindreduzierende Zusatzmittel, Verringerung des Portlandzementanteils am Bindemittel). Das autogene Schwinden wurde mit dem Schwindkegelverfahren gemessen. Das neue Verfahren wurde durch Untersuchungen zur Wiederhol- und Vergleichsgenauigkeit validiert und erwies sich als effizient und genau. Es ermöglicht Messungen unter nicht-isothermen Bedingungen; hierfür existiert bisher kein etabliertes Verfahren. Das autogene Schwinden der untersuchten ultrahochfesten Betone unter quasi-isothermen Bedingungen (20 °C) betrug im Alter von 24 h zwischen 0,25 mm/m und 0,70 mm/m. Besonders gering war es bei Zugabe eines schwindreduzierenden Zusatzmittels bzw. Verwendung superabsorbierender Polymere. Mit dem Ring-Test wurden die bei Dehnungsbehinderung entstehenden Spannungen ermittelt. Ein großer Teil der gemäß Hooke’schem Gesetz zu erwartenden Spannungen wurde durch Kriechen und Relaxation abgebaut. Die im sehr frühen Alter stark ausgeprägte Relaxationsfähigkeit war der wesentliche Grund dafür, dass es selbst bei Betonen mit hohem autogenen Schwinden zu keiner erkennbaren Rissbildung kam. Die Entwicklung der autogenen Schwindrissneigung wurde als Verhältnis von Zwangsspannung und Spaltzugfestigkeit beschrieben. Durch modifizierte Ring-Tests, mit deren Hilfe die maximale Zugspannung ermittelt wurde, konnte gezeigt werden, dass das Verhältnis von Spannung und Festigkeit als Versagenskriterium geeignet ist. Die Rissneigung lässt sich aber nur dann korrekt berechnen, wenn das stark altersabhängige Verhältnis von einaxialer Zugfestigkeit und Spaltzugfestigkeit berücksichtigt wird. Außerdem ist zu beachten, dass es im sehr frühen Alter zu einer plastischen Spannungsumlagerung in Ring-Tests kommen kann. Der Referenzbeton wies eine hohe Rissneigung von bis zu 0,68 auf. Dass die schwindreduzierenden Maßnahmen zu deutlich geringeren Werten führten, zeigt deren Bedeutung für den sicheren Einsatz von ultrahochfestem Beton. Die hier bei 20 °C durchgeführten Untersuchungen erlauben allerdings keine abschließende Bewertung der Rissneigung unter baustellentypischen Bedingungen. Um die autogene Schwindrissneigung zukünftig als Funktion der Temperatur und des Lastniveaus empirisch modellieren zu können, wurden eine analytische Spannungslösung für nicht-isotherme Ring-Tests und ein neuer Ansatz zur Untersuchung der Resttrag- und Relaxationsfähigkeit mit Hilfe nicht-passiver Ring-Tests vorgeschlagen.

A l’heure actuelle où la préservation de notre environnement est primordiale, les constructions en béton font intervenir de plus en plus des ciments comprenant des ajouts minéraux, tels que le laitier, les cendres volantes… En effet, la production des ciments composés permet de réduire le dégagement des gaz à effets de serre et de réutiliser des déchets industriels. Les bétons formulés à base de ciment au laitier de haut-fourneau (CEM III) sont également largement utilisés suite à leur bonne résistance aux réactions alcali-silices, à la diffusion des chlorures et aux attaques sulfatiques… Cependant, certains ouvrages construits avec ce type matériau ont présenté au jeune âge des problèmes de fissuration liés à la restriction de leurs déformations différées, telles que le retrait endogène, thermique et de dessiccation. Suite à cette observation, des essais préliminaires ont été réalisés au laboratoire du service BATir de l’Université Libre de Bruxelles. Ils ont mis en avant plusieurs caractéristiques du comportement de ces matériaux :<p><p>1. Lors du suivi du retrait restreint à l’aide de l’essai à l’anneau en condition de dessiccation, le béton formulé à base de ciment au laitier de haut-fourneau a fissuré bien avant le béton formulé à base de ciment Portland.<p>2. Le retrait total en condition libre du béton formulé à base de ciment au laitier de haut-fourneau est nettement supérieur à celui du béton formulé à base de ciment Portland. Cette différence de comportement est principalement due à l’accroissement rapide et plus élevé du retrait endogène des bétons formulés à base de ciment au laitier de haut-fourneau.<p><p>Au vu de ces résultats expérimentaux, il a semblé intéressant de déterminer quel était l’impact de la déformation endogène des bétons formulés à base de ciments au laitier de haut-fourneau (CEM III) sur leur sensibilité à la fissuration. Afin de répondre à cette question, les déformations différées (retrait endogène, fluage propre en compression et en traction) au jeune âge de trois compositions de béton avec différentes teneurs en laitier (0, 42 et 71%) ont été étudiées expérimentalement en conditions libre et restreinte. Cependant, le suivi du retrait endogène libre et restreint a nécessité le développement de plusieurs dispositifs expérimentaux limitant au maximum les artefacts de mesure, tels que la TSTM (Temperature Stress Testing Machine). De plus, l’interprétation de ces résultats expérimentaux a également nécessité une caractérisation du comportement de ces matériaux à l’échelle macro- et microscopique. <p><p>Finalement, cette étude a montré que malgré une déformation endogène plus élevée, les bétons formulés à base de ciment au laitier de haut-fourneau fissurent après le béton formulé à base de ciment Portland. Ce comportement est dû à :<p>-l’impact du laitier sur la réaction d’hydratation du matériau cimentaire ;<p>-la présence d’une expansion de la matrice cimentaire des bétons formulés à base de ciment au laitier de haut-fourneau au jeune âge qui retarde l’apparition des contraintes de traction au sein du matériau ;<p>-la plus grande capacité de ces matériaux cimentaires à relaxer les contraintes de traction/<p>Today, the use of concretes with mineral additions (fly ash, slag) for civil engineering structures is spreading worldwide. Indeed, the production of blended cements is more respectful of the environment than the production of Portland cement, because it allows reducing greenhouse gas emissions and using industrial wastes. Slag cement concretes are also largely used for their good resistance to alkali-silica reactions, sulphate attacks and chloride diffusion. However, some of constructions built with slag cement concretes have exhibited cracking at early age due to their restrained deformations, such as thermal, autogenous and drying shrinkage. Following these observations, a preliminary experimental study was realized in the laboratory of BATir Department at ULB. It revealed several characteristics of the behaviour of slag cement concretes:<p>1. The study of restrained deformations under drying conditions by means of ring tests showed that the slag cement concretes seem more prone to crack than the Portland cement concretes;<p>2. The total free shrinkage for slag cement concrete is clearly larger than for Portland cement concrete. This difference of behaviour is mainly due to the fast and large increase in the autogenous deformation of the slag cement concrete.<p><p>Following these experimental results, the effect of the autogenous deformation on the cracking sensibility of slag cement concretes seemed interesting to investigate. Their deformations (autogenous deformation, compressive and tensile basic creep) have been studied at early age for three concretes characterized by different slag contents (0, 42 and 71%) under free and restrained conditions. For monitoring free and restrained autogenous deformations, several test rigs aimed at limiting artefacts were designed, like the TSTM (Temperature Stress Testing Machine). Moreover, the behaviour of these concretes was also characterized by a study at a macro- and microstructure scale.<p><p>Finally, this study shows that the slag cement concretes under sealed and fully restrained conditions crack later than the Portland cement concrete, despite the fact that they are characterized by the largest autogenous deformation. This behaviour is due to:<p>- the slag effect on the hydration reaction of cementitious material;<p>- the cement matrix expansion of the slag cement concretes at early age which delays the occurrence of tensile stresses inside the material;<p>- the largest capacity of this concrete to relax tensile stresses.<p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished

The autogenous shrinkage due to self-desiccation of high- and ultra-high performance concretes with very low water-cement ratio in case of restraint leads to considerable stresses starting from very early age. The resultant risk of cracking presently cannot be adequately investigated. Parameters that are particularly difficult to capture experimentally are the concrete temperature and the viscoelasticity. The primary objective of this work was to assess as precise as possible the autogenous shrinkage cracking propensity of representative concretes at strong restraint and constant room temperature. Test methods needed to be chosen and enhanced in a way that preferably allowed for the efficient and precise investigation of all relevant factors in the future. Ideally, a method suitable for a complete empirical modeling was provided. First the methodological requirements and the advantages and disadvantages of existing test methods were discussed. Based on this, optimized test methods were proposed. Their suitability was verified using the example of ultra-high strength concrete. The choice of concrete compositions considered the essential measures for reducing shrinkage (internal curing, shrinkage-reducing admixtures, reduction of the fraction of Portland cement in the binder). The autogenous shrinkage was measured with the shrinkage cone method. This new test method was validated by investigations of the repeatability and reproducibility and proved efficient and precise. It allows for measurements under non-isothermal conditions; no established test method exists for that purpose to date. The autogenous shrinkage of the ultra-high strength concretes at the age of 24 h, investigated under quasi-isothermal conditions (20 °C), was between 0,25 mm/m and 0,70 mm/m. It was particularly low when a shrinkage-reducing admixture was added and when superabsorbent polymers were used. The stresses due to restraint were determined with the restrained ring test. A large part of the stresses to be expected according to Hooke’s Law were eliminated by creep and relaxation. The relaxation capacity being very pronounced at very early age was the main reason that no visible cracking occurred, not even with the concretes with high autogenous shrinkage. The development of the autogenous shrinkage cracking propensity was described as ratio of restraint stress and splitting tensile strength. By means of modified ring tests, used to determine the maximum tensile stress, it could be shown that the ratio of stress to strength is an appropriate failure criterion. However, the cracking propensity can be calculated correctly only if the strongly age-dependent ratio of uniaxial to splitting tensile strength is accounted for. Besides, it needs to be considered that at very early age a plastic stress redistribution may occur in restrained ring tests. The reference concrete showed a high cracking propensity of up to 0.68. The fact that shrinkage-reducing measures led to significantly lower values reveals their relevance for the safe application of ultra-high strength concrete. However, the investigations carried out here at 20 °C do not allow for a final assessment of the cracking propensity under typical on-site conditions. To empirically model the autogenous shrinkage cracking propensity as a function of temperature and stress level in the future, an analytical stress solution for non-isothermal restrained ring tests and a new approach for investigating the residual stress and relaxation capacity by means of non-passive restrained ring tests was suggested.:1 Introduction 2 Autogenous shrinkage 5 2.1 Shrinkage and hydration 5 2.2 Definitions and research approaches 10 2.3 Metrological issues 14 2.3.1 Multitude of test methods 14 2.3.2 Time-zero 16 2.3.3 Other metrological issues 18 2.4 Corrugated tube method 19 2.5 Influencing parameters 21 2.5.1 Concrete composition 21 2.5.2 Temperature 23 2.5.3 Specific countermeasures 25 2.6 Summary and conclusions with respect to the own work 25 3 Concretes used in the own investigations 27 3.1 Preliminary remarks 27 3.2 Concrete compositions 27 3.3 Constituents 28 3.3.1 Cement 28 3.3.2 Ground-granulated blast furnace slag 28 3.3.3 Silica fume 28 3.3.4 Admixtures 29 3.3.5 Aggregates 29 3.4 Mixing 29 3.5 Basic properties 30 3.5.1 Compressive strength 30 3.5.2 Splitting tensile strength 31 3.5.3 Modulus of elasticity 33 3.5.4 Analysis of mechanical properties 35 3.5.5 Coefficient of thermal expansion 38 3.5.6 Isothermal calorimetry 39 3.6 Summary 39 4 Shrinkage cone method for measuring autogenous shrinkage 41 4.1 Introduction 41 4.2 Setup and measurement procedure 41 4.3 Temperature control 44 4.4 Precision under quasi-isothermal conditions 47 4.4.1 Repeatability 47 4.4.2 Reproducibility 49 4.4.3 Shrinkage cone method vs. corrugated tube method 49 4.5 Autogenous shrinkage of the investigated concretes at 20 °C 54 4.6 Tests under non-isothermal conditions 55 4.7 Summary 56 5 Stress and cracks due to restrained autogenous shrinkage 58 5.1 Introduction 58 5.2 Degree of restraint 58 5.3 Formation of cracks 60 5.4 Very early age and importance of stress relaxation 63 5.5 Creep and cracking - further methodological aspects 65 5.6 Autogenous shrinkage cracking propensity 69 5.7 Role of temperature history 70 5.8 Further state of knowledge 72 5.8.1 Preliminary remarks on test methods 72 5.8.2 Quantitative investigations under restraint conditions 73 5.8.3 A full-scale model for assessing the cracking risk at very early age 77 5.9 Summary 78 6 Investigation of the autogenous shrinkage cracking propensity 80 6.1 Introduction 80 6.2 Suitability of temperature-stress testing machines 80 6.2.1 Development, setup and use 80 6.2.2 Results of round robin tests 83 6.3 Restrained ring test - methodological foundations 86 6.3.1 Setup and use 86 6.3.2 Evaluation of restrained ring tests 90 6.3.3 Use of temperature changes for the investigation of creep and relaxation 96 6.4 Own investigations with the restrained ring test 97 6.4.1 Setup 97 6.4.2 Compensation of disturbing temperature effects 99 6.4.3 Repeatability 100 6.4.4 Measured steel ring strains 101 6.4.5 Simple stress analysis 102 6.4.6 Autogenous shrinkage cracking propensity - further analysis 106 6.4.7 Thermal stress component 116 6.4.8 Period of maximum cracking propensity 118 6.4.9 Restraint stress versus autogenous shrinkage 119 6.4.10 Cracking propensity versus autogenous shrinkage 120 6.4.11 Further considerations on creep 121 6.5 Summary 126 7 Summary, conclusions and outlook 128 7.1 Summary and conclusions 128 7.2 Outlook 130 8 Literature 131 9 Annex 159 / Das durch Selbstaustrocknung verursachte autogene Schwinden von besonders leistungsfähigen Betonen mit sehr niedrigem Wasserzementwert führt bei Dehnungsbehinderung bereits in sehr frühem Alter zu erheblichen Zwangsspannungen. Die Gefahr der Rissbildung, die sich daraus ergibt, lässt sich bislang nur unzureichend untersuchen. Experimentell besonders schwer zu erfassende Faktoren sind die Betontemperatur und die Viskoelastizität. Das vorrangige Ziel der Arbeit war die möglichst genaue Ermittlung der autogenen Schwindrissneigung repräsentativer Betone bei starker Dehnungsbehinderung und konstanter Raumtemperatur. Dabei waren die Prüfverfahren möglichst so zu wählen und weiterzuentwickeln, dass sich zukünftig alle relevanten Faktoren effizient und genau untersuchen lassen. Im Idealfall sollte eine Methode entstehen, die eine vollständige empirische Modellierung erlaubt. Zunächst wurden die methodischen Anforderungen und die Vor- und Nachteile existierender Prüfverfahren diskutiert. Darauf aufbauend wurden optimierte Verfahren vorgeschlagen. Ihre Eignung wurde an ultrahochfestem Beton überprüft. Bei der Auswahl der Betone wurden die wesentlichen Maßnahmen zur Schwindreduzierung berücksichtigt (innere Nachbehandlung, schwindreduzierende Zusatzmittel, Verringerung des Portlandzementanteils am Bindemittel). Das autogene Schwinden wurde mit dem Schwindkegelverfahren gemessen. Das neue Verfahren wurde durch Untersuchungen zur Wiederhol- und Vergleichsgenauigkeit validiert und erwies sich als effizient und genau. Es ermöglicht Messungen unter nicht-isothermen Bedingungen; hierfür existiert bisher kein etabliertes Verfahren. Das autogene Schwinden der untersuchten ultrahochfesten Betone unter quasi-isothermen Bedingungen (20 °C) betrug im Alter von 24 h zwischen 0,25 mm/m und 0,70 mm/m. Besonders gering war es bei Zugabe eines schwindreduzierenden Zusatzmittels bzw. Verwendung superabsorbierender Polymere. Mit dem Ring-Test wurden die bei Dehnungsbehinderung entstehenden Spannungen ermittelt. Ein großer Teil der gemäß Hooke’schem Gesetz zu erwartenden Spannungen wurde durch Kriechen und Relaxation abgebaut. Die im sehr frühen Alter stark ausgeprägte Relaxationsfähigkeit war der wesentliche Grund dafür, dass es selbst bei Betonen mit hohem autogenen Schwinden zu keiner erkennbaren Rissbildung kam. Die Entwicklung der autogenen Schwindrissneigung wurde als Verhältnis von Zwangsspannung und Spaltzugfestigkeit beschrieben. Durch modifizierte Ring-Tests, mit deren Hilfe die maximale Zugspannung ermittelt wurde, konnte gezeigt werden, dass das Verhältnis von Spannung und Festigkeit als Versagenskriterium geeignet ist. Die Rissneigung lässt sich aber nur dann korrekt berechnen, wenn das stark altersabhängige Verhältnis von einaxialer Zugfestigkeit und Spaltzugfestigkeit berücksichtigt wird. Außerdem ist zu beachten, dass es im sehr frühen Alter zu einer plastischen Spannungsumlagerung in Ring-Tests kommen kann. Der Referenzbeton wies eine hohe Rissneigung von bis zu 0,68 auf. Dass die schwindreduzierenden Maßnahmen zu deutlich geringeren Werten führten, zeigt deren Bedeutung für den sicheren Einsatz von ultrahochfestem Beton. Die hier bei 20 °C durchgeführten Untersuchungen erlauben allerdings keine abschließende Bewertung der Rissneigung unter baustellentypischen Bedingungen. Um die autogene Schwindrissneigung zukünftig als Funktion der Temperatur und des Lastniveaus empirisch modellieren zu können, wurden eine analytische Spannungslösung für nicht-isotherme Ring-Tests und ein neuer Ansatz zur Untersuchung der Resttrag- und Relaxationsfähigkeit mit Hilfe nicht-passiver Ring-Tests vorgeschlagen.:1 Introduction 2 Autogenous shrinkage 5 2.1 Shrinkage and hydration 5 2.2 Definitions and research approaches 10 2.3 Metrological issues 14 2.3.1 Multitude of test methods 14 2.3.2 Time-zero 16 2.3.3 Other metrological issues 18 2.4 Corrugated tube method 19 2.5 Influencing parameters 21 2.5.1 Concrete composition 21 2.5.2 Temperature 23 2.5.3 Specific countermeasures 25 2.6 Summary and conclusions with respect to the own work 25 3 Concretes used in the own investigations 27 3.1 Preliminary remarks 27 3.2 Concrete compositions 27 3.3 Constituents 28 3.3.1 Cement 28 3.3.2 Ground-granulated blast furnace slag 28 3.3.3 Silica fume 28 3.3.4 Admixtures 29 3.3.5 Aggregates 29 3.4 Mixing 29 3.5 Basic properties 30 3.5.1 Compressive strength 30 3.5.2 Splitting tensile strength 31 3.5.3 Modulus of elasticity 33 3.5.4 Analysis of mechanical properties 35 3.5.5 Coefficient of thermal expansion 38 3.5.6 Isothermal calorimetry 39 3.6 Summary 39 4 Shrinkage cone method for measuring autogenous shrinkage 41 4.1 Introduction 41 4.2 Setup and measurement procedure 41 4.3 Temperature control 44 4.4 Precision under quasi-isothermal conditions 47 4.4.1 Repeatability 47 4.4.2 Reproducibility 49 4.4.3 Shrinkage cone method vs. corrugated tube method 49 4.5 Autogenous shrinkage of the investigated concretes at 20 °C 54 4.6 Tests under non-isothermal conditions 55 4.7 Summary 56 5 Stress and cracks due to restrained autogenous shrinkage 58 5.1 Introduction 58 5.2 Degree of restraint 58 5.3 Formation of cracks 60 5.4 Very early age and importance of stress relaxation 63 5.5 Creep and cracking - further methodological aspects 65 5.6 Autogenous shrinkage cracking propensity 69 5.7 Role of temperature history 70 5.8 Further state of knowledge 72 5.8.1 Preliminary remarks on test methods 72 5.8.2 Quantitative investigations under restraint conditions 73 5.8.3 A full-scale model for assessing the cracking risk at very early age 77 5.9 Summary 78 6 Investigation of the autogenous shrinkage cracking propensity 80 6.1 Introduction 80 6.2 Suitability of temperature-stress testing machines 80 6.2.1 Development, setup and use 80 6.2.2 Results of round robin tests 83 6.3 Restrained ring test - methodological foundations 86 6.3.1 Setup and use 86 6.3.2 Evaluation of restrained ring tests 90 6.3.3 Use of temperature changes for the investigation of creep and relaxation 96 6.4 Own investigations with the restrained ring test 97 6.4.1 Setup 97 6.4.2 Compensation of disturbing temperature effects 99 6.4.3 Repeatability 100 6.4.4 Measured steel ring strains 101 6.4.5 Simple stress analysis 102 6.4.6 Autogenous shrinkage cracking propensity - further analysis 106 6.4.7 Thermal stress component 116 6.4.8 Period of maximum cracking propensity 118 6.4.9 Restraint stress versus autogenous shrinkage 119 6.4.10 Cracking propensity versus autogenous shrinkage 120 6.4.11 Further considerations on creep 121 6.5 Summary 126 7 Summary, conclusions and outlook 128 7.1 Summary and conclusions 128 7.2 Outlook 130 8 Literature 131 9 Annex 159

The master‘s thesis focuses on testing the shotcrete prepared in laboratory conditions. The main observed properties are compresive strenght of shotcrete and modulus of elasticity. The aim is assessment of methods for measuring those parameters. The calibrating correlations for strenght characteristics of shotcrete are given by obtaining the results of used methods. The shotcrete composition, amount and type of accelerating additive as well as economic aspect of using shotcrete is also assessed.