Thesis (Ph. D.)--University of Missouri-Columbia, 1997. / Typescript. Vita. Includes bibliographical references (leaves 76-80). Also available on the Internet.

Memoire (M. Sc. A.)-- Universite du Quebec a Chicoutimi, 1984. / Bibliographie: f. 109-114. Document électronique également accessible en format PDF. CaQCU

Mémoire (M.Eng.)--Université du Québec à Chicoutimi, 1996. / Document électronique également accessible en format PDF. CaQCU

Mémoire (M.Eng.)--Université du Québec à Chicoutimi, 1996. / Document électronique également accessible en format PDF. CaQCU

Thèse (D.Eng.) -- Université du Québec à Chicoutimi, 2003. / Bibliogr.: f. [145]-152. Document électronique également accessible en format PDF. CaQCU

Thèse (D.Eng.) -- Université du Québec à Chicoutimi, 2004. / Bibliogr.: f. [183]-197. Document électronique également accessible en format PDF. CaQCU

Thesis (Ph. D.)--University of Missouri-Columbia, 1997. / Typescript. Vita. Includes bibliographical references (leaves 76-80). Also available on the Internet.

Thesis (MScEng)--University of Stellenbosch, 2001. / ENGLISH ABSTRACT: This thesis covers the development of a multilevel cascaded inverter for the purpose of costeffective transformerless series dip compensation. Of all known power quality problems, voltage dips are the greatest reason for concern. Dips/sags occur more frequently than outages and therefore tend to be more costly for industry as modem technical equipment becomes all the more sensitive to the quality and reliability of supply. A number of devices already exist to compensate for this problem, but the cost of most of these systems does not always justify the financial losses they compensate for. All of these systems are using transformers and/or large filter components that contribute to the size, price and losses to quite a large extent. Series injection dip compensators offer the advantage of only having to compensate for the decrease in supply voltage during a dip. This results in a significant reduction in the converter ratings and energy storage requirements compared to conventional uninterruptible power supplies or shunt injection power quality devices. Existing inverter topologies, including multilevel inverters, were therefore studied and compared as possible solutions for cost-effective transformerless series dip compensation. On the basis of these considerations the multilevel cascaded inverter seems to be the most cost-effective option. The relatively low harmonic content of its unfiltered output also eliminates the need for a large output filter. A single-phase dip compensator, with this topology, was designed and built according to specifications stated by Eskom, the main utility in South Africa. Batteries as energy storage and automotive MOSFETs as switching components, proved to be most cost-effective options for the specified power ratings. Control algorithms for dip compensation with the multilevel inverter were also developed. Some of these algorithms are based on existing techniques, but two new algorithms were also developed to implement force commutation of the thyristors and to share the power dissipation in the dip compensator. Simulations indicated that these algorithms could be suitable and sufficient for their application. This dip compensator with its control algorithms was tested with a dip generator, developed at the University of Stellenbosch, for different types of loads. The experimental results confirmed the simulations and showed a very good performance for the specified conditions. An optimised design of this dip compensator will make it a cost-effective solution for dip compensation. / AFRIKAANSE OPSOMMING: Hierdie tesis dek die ontwikkeling van 'n multivlakwisselrigter, in kaskade, met koste-effektiewe transformatorlose duik kompensasie as mikpunt. Van al die bekende toevoerkwaliteit probleme wek duike in die spanning die meeste kommer. Duike kom meer gereeld voor as kragonderbrekings en neig daarom om 'n groter onkoste te wees vir die industrie soos wat moderne tegnologiese toerusting al hoe meer sensitief raak vir die kwaliteit en betroubaarheid van die toevoer. 'n Aantal toestelle wat vir hierdie probleem kompenseer bestaan reeds, maar die koste van hierdie stelsels regverdig nie altyd die finansiële verliese wat hulle moet elimineer nie. Al hierdie stelsels gebruik transformators en/of groot filter komponente wat grootliks bydra tot die grootte, prys en verliese van hierdie stelsels. Serie-injeksie kompenseerders het die voordeel dat hulle net kompenseer vir die verlies in die toevoerspanning tydens die duik. Dit het 'n beduidende vermindering in die omsetterkenwaardes en energiestoorvereistes tot gevolg in vergelyking met ononderbroke kragbronne (UPS) of newe-injeksie toevoerkwaliteit toestelle. Daarom IS bestaande wisselrigtertopologië, insluitende multivlakwisselrigters, bestudeer en vergelyk as moontlike oplossings vir koste-effektiewe serie duik-kompensasie. Van al hierdie moontlikhede lyk die multivlakwisselrigter, in kaskade, na die mees koste-effektiewe opsie. Die relatiewe lae harmoniese inhoud van sy ongefilterde uittree elimineer die behoefte aan 'n groot uittreefilter. 'n Enkelfase duik kompenseerder, met hierdie topologie, is ontwerp en gebou volgens die spesifikasies wat vasgestel is deur Eskom, die hoof elektriese kragvoorsiener in Suid-Afrika. Dit het geblyk dat batterye, en MOSFETte uit die motorbedryf, die mees koste-effektiewe opsies bied vir onderskeidelik die energiestoor en skakelkomponente. Beheeralgoritmes VIr duik kompensasie met die multivlakwisselrigter is ook ontwikkel. Sommige van hierdie algoritmes is gebaseer op bestaande tegnieke, maar twee nuwe algoritmes is ook ontwikkel vir die kommutering van die tiristors en die deling van die drywingsverkwisting in die duik kompenseerder. Simulasies dui aan dat hierdie algoritmes geskik en voldoende kan wees vir hulle toepassing. Hierdie duik kompenseerder met sy beheeralgoritmes is getoets vir verskillende tipes laste met 'n duikgenerator wat ontwikkel is by die Universiteit van Stellenbosch. Die eksperimentele resultate bevestig dit wat verkry is uit die simulasies en wys 'n goeie werkverrigting vir die gespesifiseerde kondisies. 'n Geoptimeerde ontwerp van hierdie duik kompenseerder sal dit 'n koste-effektiewe oplossing maak vir duik kompensasie.

Há diversos procedimentos para determinação dos carregamentos de vento. A norma NBR 6123/88 pode ser utilizada para determinação desses carregamentos e consequentes esforços para dimensionamento de estruturas. Entretanto há procedimentos não normativos que podem contribuir para determinação desses mesmos carregamentos. Um deles, que é empregado no presente trabalho, é o método do vento sintético. O objetivo desse trabalho é o de fazer uma análise comparativa entre as respostas obtidas na estrutura sujeita aos carregamentos dinâmicos, obtidos através do método do vento sintético, e as respostas obtidas com carregamentos estáticos gerados a partir de considerações da norma NBR 6123/88 – Forças devidas ao vento em edificações. A estrutura em estudo é uma torre de transmissão de energia elétrica, que é modelada no programa computacional RSTAB da Dlubal (DLUBAL, 2015), para determinação de suas características dinâmicas. Os carregamentos dinâmicos do vento para o método do vento sintético são gerados através de um algoritmo, utilizando-se do programa computacional Mathcad Prime, versão 3.0. Os carregamentos estáticos e dinâmicos são lançados na estrutura para determinação de deslocamentos, esforços internos axiais e reações de apoio. Os resultados comparados demonstram que a abordagem que considera carregamentos gerados a partir da NBR 6123/88 é a mais conservadora, com valores de grandezas que excedem em até 132% valores obtidos a partir do método do vento sintético. / There are several procedures to determine the wind loadings. The Brazilian code NBR 6123/88 can be used to determine these loadings and the internal forces for structural design. However, there are non-normative procedures that may contribute to determining those same loads. One of them, which is used in this work, is the method of synthetic wind. The aim of this study is to make a comparative analysis of the responses obtained for the structure when subjected to dynamic loads, obtained through the synthetic wind method, and the responses obtained with static loads generated from considerations of NBR 6123/88 - Forces due to the wind on buildings. The structure under study is a power transmission tower, which is modeled in the software program RSTAB, developed by Dlubal, to determine its dynamic characteristics. Using the software Mathcad Prime 3.0 the dynamic wind loads are generated by an algorithm for the wind synthetic method. Static and dynamic loads are applied to in the structure to determine displacements, axial internal forces and support reactions. The compared results show that the approach that considers loadings generated from the NBR 6123/88 is the most conservative, with magnitude values that exceed up to 132% values obtained from the synthetic wind method.

Thesis (PhD (Electrical Engineering))--Cape Peninsula University of Technology, 2018. / Electrical energy can be easily used and converted to other forms of energy for various applications. Technological advancement increases the dependency on electricity to a great extent. Various internal and external factors are responsible for the bad quality of power in power systems. The performance of the system is greatly affected by the presence of harmonics, as well as voltage and frequency variations, which leads to the malfunctioning of the device and decline of power quality and supply at load side. The reactive power compensation is carried out for better power quality. The literature survey is done to find the best and efficient scheme for reactive power compensation and mitigation of various power quality problems. The devices which are used to measure various power quality factors are discussed. Various mitigating schemes are surveyed in order to compensate reactive power and to improve the power quality at the distribution end. The integration of the most widely used renewable energy, wind energy in the distribution system creates technical issues like stability of the grid, harmonic distortion, voltage regulation, active and reactive power compensation etc. which are restricted to IEC and IEEE standards. One of the topics this thesis addresses is regulation in the reactive power generated along with voltage regulation by using an effective power electronics device known as a STATCOM. The main power quality factors like overvoltage and voltage flickers are mitigated by establishing STATCOMs in small wind farms. The wind farms are equipped with three wind turbines. These three wind turbines found in the wind farm can be operated together or one after another with an introduced delay. A glitch in even a little piece of a power grid can result in loss of efficiency, income and at times even life. In this manner, it is basic to outline a system which can distinguish the faults of the power system and take a faster response to recover it back to required reactive power. Two devices STATCOM and D-STATCOM are used for this purpose in this thesis. The D-STATCOM circuit and operating principle are also discussed in thesis. Different topologies of D-STATCOM discussed with their benefits and shortcomings. The voltage, current and hybrid technologies of D-STATCOM are also discussed.