Spelling suggestions: "subject:"electric transformer -- ingesting"" "subject:"electric transformer -- andtesting""
1 |
Condition monitoring of transformers : the acoustic method.20 October 2010 (has links)
Partial discharges (p.d.'s) are a major source of the progressive deterioration of insulation in / Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, 2007.
|
2 |
A statistical method for establishing insulated cable clearances in large power transformersLanoue, Thomas J. January 1975 (has links)
The relationship between impulse breakdown stress and stressed oil volume has been extensively investigated for uniform field electrodes. In large high voltage transformers it is essential to extend this relationship to paper insulated non-uniform field situations which are more frequently encountered in practice. This paper develops the stated relationship by experimental tests, using insulated cable to plane configurations, and statistical methods. These tests show that the impulse breakdown strength of an insulated cable to plane or nonuniform field system has a two parameter Weibull distribution, when the oil is considered to be the weak-link of the system. A non-linear regression analysis is then used to find that the Weibull parameters for insulated non-uniform field electrodes are approximately the same as the parameters for the uninsulated uniform field electrodes provided their stressed oil volumes are equivalent. Statistical calculations are used to derive the fundamental relationship between the Weibull parameters for any stressed oil volume and the Weibull parameters for the unit oil volume. With this relationship it is possible for design engineers to approximately determine the probability of electrical breakdown of any insulated cable to plane configuration in large power transformers.
|
3 |
Hydrogen gas-in-oil on-line monitor for high voltage current transformers.Van Deventer, M. J. January 1991 (has links)
A dissertation submitted to the Faculty of
Engineering, University of the Witwatersrand,
Johannesburg, in fulfilment of the requirements for
the degree of Master of Science in Engineering. / The sudden failure of oil paper-insulated current
transformers has become a problem of considerable
concern due to the cost of the resulting destruction,
and danger to personnel. The aim of the dissertation
is. to determine the most suitable method of detecting
lncipient faults in current transformers, test this
method on an experimental current transformer, and
finally implement this technique in a low cost on-line
monitor. A literature survey indicated that hydrogen
gas-in-oil on-line monitoring would be the most
suitable technique.(Abbreviation abstract) / Andrew Chakane 2019
|
4 |
Hydrogen gas-in-oil on-line monitor for high voltage current transformers.Van Deventer, M. J. January 1991 (has links)
A dissertation submitted to the Faculty of Engineering, University of the Witwatersrand, Johannesburg, in fulfilment of the requirements for the degree of Master of Science in Engineering / The sudden failure of oil paper-insulated current
transformers has become a problem of considerable
concern due to the cost of the resulting destruction,
and danger to personnel. The aim of the dissertation
is to determine the most suitable method of detecting
incipient faults in current transformers, test this
method on an experimental current transformer, and
finally implement this technique in a low cost on-line
monitor. A literature survey indicated that hydrogen
gas-in-oil on-line monitoring would be the most
suitable technique.(Abbreviation abstract) / Andrew Chakane 2019
|
5 |
Proposal and Analysis of Demagnetization Methods of High Voltage Power System Transformers and Design of an Instrument to Automate the Demagnetization ProcessMakowski, Nathanael Jared 01 January 2011 (has links)
Present demagnetization methods for large power system transformers are time consuming and can be dangerous to persons performing demagnetization. The work of this thesis was to develop improved demagnetization methods and to construct an automated instrument that would implement the methods developed. One previously developed method was analyzed for effectiveness. Then, two new methods for demagnetization were developed and also analyzed for effectiveness. An automated test instrument prototype was redesigned to be able to accommodate these methods and to improve the safety of the user. The previously developed method attempts demagnetization based on current flow behavior characteristics. The first new method is a magnetic flux estimation based on saturation time. The second new method is also based on measuring saturation time, modified to account for the variable voltage loss due to wire resistance. The second of the two new methods developed proved to be the most effective for demagnetization and was able to demagnetize a transformer within an error margin of 2%. The instrument designed to perform the demagnetization with this new routine is now in early production stages for an expanded field trial with transformer maintenance teams.
|
6 |
Effects Of Data Pre-processing On Transfer Function And Coherence Function Computed During Impulse Tests On TransformersJithendra, V 01 1900 (has links) (PDF)
No description available.
|
Page generated in 0.1236 seconds