Elliptical hollow sections (EHS) are the newest steel shape to emerge in the industry, but appropriate design guidance is lacking, being completely absent from Canadian codes and guidelines. Geometric property and compressive resistance tables were established to be potentially added to the Canadian guides. The equivalent RHS method, originally proposed by Zhao and Packer in 2009, was simplified and modified to validate its use for the design of EHS columns and beams. An experimental programme was developed to investigate the behaviour of EHS-to-EHS welded connections. Twelve T and X connection tests were performed to study the effect of connection angle, orientation type and loading. Two methods were developed to predict connection capacities and failure modes: the equivalent CHS and the equivalent RHS approaches. Both methods proved to be conservative on average, but the equivalent RHS approach proved to be more successful at capturing the actual failure mode of EHS-to-EHS connections.

Elliptical hollow sections (EHS) are the newest steel shape to emerge in the industry, but appropriate design guidance is lacking, being completely absent from Canadian codes and guidelines. Geometric property and compressive resistance tables were established to be potentially added to the Canadian guides. The equivalent RHS method, originally proposed by Zhao and Packer in 2009, was simplified and modified to validate its use for the design of EHS columns and beams. An experimental programme was developed to investigate the behaviour of EHS-to-EHS welded connections. Twelve T and X connection tests were performed to study the effect of connection angle, orientation type and loading. Two methods were developed to predict connection capacities and failure modes: the equivalent CHS and the equivalent RHS approaches. Both methods proved to be conservative on average, but the equivalent RHS approach proved to be more successful at capturing the actual failure mode of EHS-to-EHS connections.

Concrete-filled tubular (CFT) columns have been widely adopted in building structures owing to their superior structural performance, such as enhanced load bearing capacity, compared to hollow tubes. Circular, square and rectangular hollow sections are most commonly used in the past few decades. Elliptical hollow section (EHS) available recently is regarded as a new cross-section for the CFT columns due to its attractive appearance, optional orientation either on major axis or minor axis and improved structural efficiency. The state of the research in terms of elliptical columns, tubular joints between EHSs and connections with CFT columns, etc., are reviewed in this thesis, showing a lack of investigations on EHSs, especially on beam to elliptical column connections which are essential in framed structures. The structural behaviour of elliptical column to I-beam connections under bending is studied in this thesis to fill the research gap. Overall ten specimens with various joint assemblies were tested to failure to highlight the benefits of adopting concrete infill and stiffeners in the columns. A three-dimensional finite element model developed by using ABAQUS software is presented and verified against obtained experimental results, which shows acceptable accuracy and reliability in predicting failure modes of the connections and their moment capacities. Parametric studies were performed to access the main parameters that affecting the bending behaviour of the connections. A simple hand calculation method in terms of ultimate moment capacity is proposed according to experiments conducted for connections with concrete-filled columns.

Yes / Elliptical Hollow Sections (EHSs) have been utilized in construction recently because of their visual appearance as well as the potential structural efficiency owing to the presence of the two principle axes. However, little information currently exists for the design of beam to elliptical column connections, which is an essential part of a building structure. Thus, to ensure the safe and economic application of EHSs, a new research project has been initiated. Rotation behaviour of simply bolted beam to concrete-filled elliptical steel column connections was investigated experimentally. Various joint types were considered and the benefits of adopting core concrete and stiffeners were highlighted. This paper covers the experimental studies and simulation of the connections using the ABAQUS standard solver. Comparisons of failure modes and moment vs. rotation relationships of the connections between numerical and experimental results were given. Good agreement has been obtained and the developed finite element model was therefore adopted to conduct a preliminary parametric study to explore the effect of critical parameters on the structural behaviour of beam to concrete-filled elliptical column connections.

Yes / This paper investigated the rotation behaviour of simply bolted I-beam to concrete-filled elliptical steel tubular (CFEST) column connections experimentally. Ten different joint assemblies were tested to failure, with a constant axial compressive load applied to the column and upwards concentrated loads at the beam ends. All of the steel tubes were hot-finished and had a cross-sectional aspect ratio of 2. The orientation of the column and the arrangement of the stiffening plates were taken into consideration. Moment versus rotation relationships and failure modes were compared for each joint, highlighting the benefits of using core concrete and stiffeners in these connections.

Concrete-filled tubular (CFT) columns have been widely adopted in building structures owing to their superior structural performance, such as enhanced load bearing capacity, compared to hollow tubes. Circular, square and rectangular hollow sections are most commonly used in the past few decades. Elliptical hollow section (EHS) available recently is regarded as a new cross-section for the CFT columns due to its attractive appearance, optional orientation either on major axis or minor axis and improved structural efficiency. The state of the research in terms of elliptical columns, tubular joints between EHSs and connections with CFT columns, etc., are reviewed in this thesis, showing a lack of investigations on EHSs, especially on beam to elliptical column connections which are essential in framed structures. The structural behaviour of elliptical column to I-beam connections under bending is studied in this thesis to fill the research gap. Overall ten specimens with various joint assemblies were tested to failure to highlight the benefits of adopting concrete infill and stiffeners in the columns. A three-dimensional finite element model developed by using ABAQUS software is presented and verified against obtained experimental results, which shows acceptable accuracy and reliability in predicting failure modes of the connections and their moment capacities. Parametric studies were performed to access the main parameters that affecting the bending behaviour of the connections. A simple hand calculation method in terms of ultimate moment capacity is proposed according to experiments conducted for connections with concrete-filled columns.

no / This paper investigates the axial compressive behaviour of short concrete-filled elliptical steel columns using the ABAQUS/Standard solver, and a new confined concrete stress-stain model for the concrete-filled elliptical steel hollow section is proposed. The accuracy of the simulation and the concrete stress-strain model was verified experimentally. The stub columns tested consist of 150 × 75 elliptical hollow sections (EHSs) with three different wall thicknesses (4 mm, 5 mm and 6.3 mm) and concrete grades C30, C60 and C100. The compressive behaviour, which includes the ultimate load capacity, load versus end-shortening relationship and failure modes, were obtained from the numerical models and compared against the experimental results, and good agreements were obtained. This indicated that the proposed model could be used to predict the compressive characteristics of short concrete-filled elliptical steel columns.

This paper presents the axial compressive behaviour of stub concrete-filled columns with elliptical stainless steel and carbon steel hollow sections. The finite element method developed via ABAQUS/Standard solver was used to carry out the simulations. The accuracy of the FE modelling and the proposed confined concrete stress-strain model were verified against experimental results. A parametric study on stub concrete-filled columns with various elliptical hollow sections made with stainless steel and carbon steel was conducted. The comparisons and analyses presented in this paper outline the effect of hollow sectional configurations to the axial compressive behaviour of elliptical concrete-filled steel tubular columns, especially the merits of using stainless steel hollow sections is highlighted.