Spelling suggestions: "subject:"2mission monitoring"" "subject:"2emission monitoring""
1 |
A review of emission trading and its implementation in Hong Kong /Ng, Yu-yan, Amanda. January 2007 (has links)
Thesis (M. Sc.)--University of Hong Kong, 2007.
|
2 |
Towards chemical species tomography of carbon dioxide for aviation turbine emissionsChighine, Andrea January 2017 (has links)
This thesis sets out to examine the proposal that, by using tomography and gas sensing techniques to detect and image gas concentration in fast moving flows, engineers can improve the combustion diagnostics and emissions performance of gas turbines, enabling a better understanding of combustion and design optimisation of greener engines. The key factor is the combination of tomography with Tunable Diode Laser Absorption Spectroscopy (TDLAS) gas sensing technology, implemented simultaneously along many beams, to image the gas concentration distribution in the exhaust plume of a gas turbine, in a plane perpendicular to the plume flow direction. The target gas species is carbon dioxide, CO2, and the absorption feature chosen is at a wavelength of 1997.2 nm. The narrow spectral absorption properties of such small molecules present a considerable challenge for a multi-beam tomographic implementation. Moreover, the design, oriented to harsh and industrial environments, presents key challenges for the design of robust optics and electronics for the collection of reliable data. The development of a 126-beam tomography system required the investigation of recently developed TDLAS techniques and their compatibility with data acquisition (DAQ) system firmware strategies to be implemented by custom DAQ electronics. A novel FPGA-based single channel TDLAS CO2 detection system has been designed and built to demonstrate the feasibility for the replication of 126-channels in the full system. Further proof-of-concept experiments carried out at full scale have produced tomographic images of phantom CO2 distributions that demonstrate the utility of the CST technique.
|
3 |
A review of emission trading and its implementation in Hong Kong吳宇茵, Ng, Yu-yan, Amanda. January 2007 (has links)
published_or_final_version / Environmental Management / Master / Master of Science in Environmental Management
|
4 |
Etudes préalables à l'adsorption en phase gazeuse dynamique de dioxines sur une zéolithe pour la mesure à l'émission. / Preliminary studies for gaseous dynamic dioxin adsorption on a zeolite, for emission monitoringBonvalot, Lise 14 May 2013 (has links)
L’incinération des ordures ménagères entraîne la formation de dioxines. Ces composés sont reconnus comme toxiques voire cancérigènes. La connaissance des quantités émises en temps réel est donc nécessaire.Ces travaux de thèses s’inscrivent dans une étude globale d’un dispositif permettant l’analyse en ligne des dioxines grâce à un système pré-concentrateur utilisant l’adsorption sélective de congénères toxiques sur des zéolithes, supportant la thermo-désorption, et un analyseur en masse.Dans un premier temps, les enjeux sont exposés. Puis une étude des écoulements dans les milieux poreux a pour but de déterminer quelle est la meilleure mise en forme des zéolithes pour favoriser l’adsorption en phase gazeuse dynamique. Ensuite, la mise en place et la caractérisation d’un système de génération de dioxines en phase gazeuse sont détaillées. Cette source est ajustable en concentration et en débit, permettant des études d’adsorption en laboratoire.Les premiers essais d’adsorption en phase gazeuse montrent, en accord avec les prédictions de la première étude, l’importance d’un adsorbant régulier de faible granulométrie. L’analyse par thermodésorption des dioxines piégées sur des grains de FAU [NaX] est réalisée en quelques heures.La facilité d’utilisation de zéolithes dans un système de prélèvement comme adsorbants et leur analyse par les méthodes de la norme EN 1948 a été prouvée lors de deux campagnes sur une unité d’incinération d’ordures ménagères.Ces travaux ont montré que l’analyse quotidienne en ligne des dioxines est d’actualité et pertinente. / The waste incineration leads to the formation of dioxins. These compounds are known to be toxic, even carcinogenic. Therefore, the emitted amounts have to be monitored.This work is part of a comprehensive study of a device for the online analysis of dioxins by means of a pre-concentrator using selective adsorption of toxic congener upon zeolites, allowing thermal desorption and a mass spectrometer.At first, the stakes are exposed. Then a study of flow in porous media aims to determine the best shape of zeolites to promote dynamic gas-phase adsorption. Then the establishment and characterization of a system for gas phase dioxins generation are detailed. This source is adjustable both in concentration and flow, allowing laboratory adsorption studies.The first gas phase adsorption tests show, in agreement with the predictions of the first study, the importance of a regular-shaped adsorbent with small particle sizes. The analysis by thermal desorption of dioxins trapped on grains FAU [NaX] is carried out in a few hours.The ease of use of zeolites in sampling train as adsorbent and their analysis according to EN 1948 standards has been proved during two campaigns at a waste incinerator facility.
|
5 |
Atmospheric dispersion modelling study of a township within a declared national priority areaMkhonto, Prince Dominican Maphisa 01 July 2014 (has links)
M.Sc. (Environmental Management) / The use of atmospheric dispersion models to predict ground level pollutants concentrations has been on an increase in South Africa in the last decade. At this stage National Department of Environmental Affairs has published a draft document to provide guidelines on the type or use of models. Most Air Quality Specialists in the country make use of the United States Environmental Protection Agency approved atmospheric dispersion models to conduct air quality investigations. These models were developed in the United States of America after having considered the environmental set up and monitoring capabilities. In light of the above, much of the required input data are not readily available and calculations have been conducted to make up for the shortfall. For domestic emissions, quantifying the emissions factors is proving to be a challenge for modellers. They calculate emissions factors using different data sets from variable sources – sometimes the data are not up to date. This variability could potentially compromise the output of the model. This study aim was to model domestic emissions from an isolated rural township, Leandra, in the Mpumalanga Province – located within a nationally declared Highveld air quality management priority area – for two one month periods – in both the winter – July 2008 – and the summer – October 2008. This was achieved by using a United States Environmental Protection Agency approved AERMOD atmospheric dispersion model. Hourly surface measured meteorology data were obtained from the Langverwacht ambient air quality monitoring station and upper air data from the Irene monitoring station. The data were screened for any suspect values, formatted and then pre-processed by AERMET to be used by AERMOD. The study also investigated and compared the modelled time-series and monitored time-series data. This study calculated the effective emissions rate of 0.3 g PM10 s-1 m-2 by using a combination of monitored hourly PM10 concentrations and dispersion modelling time series data, for a typical Highveld township. Furthermore, the study revealed that, during winter when air is stagnant, Leandra was demonstrably isolated from other emissions sources of strength in the region – i.e. power station and domestic emissions were the dominant emissions sources. Under these circumstances, indoor and outdoor emissions were above the acceptable standards – i.e. they constituted unhealthy ambient air conditions. During summer – with the higher average wind speeds – Leandra was under the influence of industrial sources and the argument of isolation was not valid.
|
6 |
Operando detection of Li-plating by online gas analysis and acoustic emission monitoringEspinoza Ramos, Inti January 2023 (has links)
Lithium ion batteries (LIBs) are widely used for storing and converting chemical energy into electrical energy. During battery operation, lithium ions move between electrode materials, enabling energy storage. However, aging mechanisms like lithium plating can negatively impact battery performance and lifetime. Lithium plating occurs when lithium ions are reduced to metallic lithium on the graphite electrode. The undesired Li plating in LIBs leads to dendrite formation that may puncture the separator, causing internal short-circuit and ultimately thermal runaway. This study aims to investigate the internal processes of LIBs during charge and discharge. Two analysis methods are employed: online electrochemical mass spectrometry (OEMS) and acoustic emission monitoring (AEM). OEMS is a gas analysis technique that combines electrochemical measurements with mass spectrometry to provide real-time testing of cells. OEMS allows identifying and quantifying gas evolution/consumption of chemical species. AE is a diagnostic tool, offering monitoring the health of LIBs through detection and characterisation of stress waves produced by parasitic mechano-electrochemical events. The results indicates that the formation of SEI thin film layer, generated gases like hydrogen and ethylene, while consuming carbon dioxide. During induced lithium plating, hydrogen and carbon dioxide were consumed, and ethylene gas was produced, due to new SEI film formation process. The acoustic emission analysis indicated that lithium plating was an active process, whereas SEI formation was less AE active. Further research is needed to understand the relationships and significance of these processes for battery performance and safety. Overall, this study highlighted the importance of investigating aging mechanisms in LIBs to enhance their performance and longevity. By combining OEMS and AE, it was possible to analyse the batteries behaviour during cycling. The evolution of gas and acoustic signals provided insights into the reactions and processes occurring inside the battery during cycling.
|
7 |
Etude par émission acoustique et dilatométrie d'électrodes à base de silicium pour batteries Li-ion / Acoustic emission and dilatometry study of silicon based electrodes for Li-ion batteriesTranchot, Alix 19 October 2016 (has links)
Afin d’augmenter la densité d’énergie des batteries Li-ion, en particulier pour le marché des véhicules électriques, il est nécessaire de développer des matériaux d’électrode plus performants. Le silicium, dont la capacité spécifique (3579mAh/g) est dix fois supérieure à celle du graphite, est un matériau particulièrement prometteur. Néanmoins, lors de sa lithiation, il subit une forte expansion volumique (280% contre 10% pour le graphite) conduisant à la décrépitation des particules de Si et à la fissuration/décohésion de l’électrode. Il en résulte une diminution notable de la durée de vie de l’anode. Pour améliorer la tenue au cyclage des électrodes, il est nécessaire de bien comprendre/quantifier leur dégradation morphologique, ce que permettent difficilement des analyses post mortem conventionnelles. Notre objectif est d’utiliser et de développer des outils permettant d'étudier in operando la dégradation de ces électrodes. Nous avons mis en œuvre des protocoles de caractérisation in operando couplant des mesures électrochimiques à l’émission acoustique d’une part et à la dilatométrie d’autre part. Le suivi de l’activité acoustique au cours du cyclage de l’électrode a montré que les particules de Si micrométrique constituant cette électrode se fracturent dès le début de la lithiation, et que la fissuration de l’électrode se produit progressivement tout au long de la 1ère lithiation. Peu d’activité acoustique est détectée par la suite. Par l’analyse des signaux acoustiques, trois types de signaux ont été identifiés, se différenciant principalement selon leur fréquence de pic. Les signaux de hautes fréquences sont associés principalement aux micro-fractures des particules en début de lithiation, et les signaux à moyennes et basses fréquences sont respectivement attribuées à la fissuration de l’électrode et aux macro-fractures des particules de Si en fin de lithiation. L’étude dilatométrique a montré une expansion volumique maximale de ~170% avec une encre tamponnée à pH3 versus 300% si l’électrode est préparée à pH7. Cette différence s’explique par la formation de liaisons cohésives entre le liant CMC et les particules de Si lorsque l’électrode est préparée à pH 3, améliorant sa résistance mécanique. Ce qui a été confirmé par des mesures d’indentation. Ainsi, l’électrode formulée à pH 3 montre une meilleure cyclabilité. Enfin, nous avons démontré qu’une diminution notable de la durée de vie de l’électrode est observée lorsque la taille initiale des particules de Si est réduite de 230 à 85nm. Nous expliquons ce résultat inattendu par une quantité insuffisante de CMC par rapport à la surface spécifique plus élevée des particules de taille plus faible. De fait, sa résistance mécanique est insuffisante et conduit à une fissuration et une exfoliation importantes de l’électrode. Ceci est appuyé par les mesures de dilatométrie, d’émission acoustique et des observations MEB. / To increase the energy density of Li-ion batteries, especially for the electric vehicle market, the development of new electrode materials is required. Silicon is a particularly interesting material, thanks to its high specific capacity (3579mAh/g, ten times higher than the capacity of graphite). Nevertheless, upon lithiation, silicon undergoes an important expansion (300% vs 10% for graphite). This leads to the cracking of the Si particles and fracturing of the electrode film. These induces electrical disconnections upon cycling, resulting in a poor cycle life. To improve the cyclability of the Si based electrodes, it is important to better understand/quantify their mechanical degradation. Conventional post mortem analyses are insufficient for that purpose. The objective of this work is to develop and use in operando analyses techniques. Therefore, we established protocols to characterize composite electrodes by electrochemical measurements coupled with either acoustic emission (AE) or dilatometry measurements. The evolution of the acoustic activity upon cycling showed that the cracking of the micrometric Si particles and of the composite film mainly occurs during the first cycle and is initiated in the early stage of the lithiation. Very few AE signals are detected in the following cycles. The signal analysis leads to the identification of three types of signals depending to their peak frequency. High frequency signals were associated with surface micro-cracking of the Si particles at the beginning of lithiation. Medium and low frequency signals were respectively attributed to the fracturing of the electrode film and bulk macro-cracking of the Si particles at the end of lithiation. An electrode thickness expansion of 170% was measured by electrochemical dilatometry for our electrodes prepared at pH3 versus 300% for electrodes prepared at pH7. The different mechanical behavior is explained by the formation of covalent bonds between the CMC binder and Si particles at pH3, which increases the mechanical stability of electrodes. This was confirmed by the measurement of their hardness and Young’s modulus. Therefore, pH3 electrodes display a higher capacity retention. It was also demonstrated that a decrease of the Si particle size does not necessarily lead to an improvement of the electrode cycle life. Indeed, we observed a significant decrease of the electrode cycle life when the Si particle size is decreased from 230 to 85 nm. This can be explained by a lack of CMC binder in relation with the higher surface area of the smaller Si particles, leading to a lower mechanical resistance of the electrode film. Within the first cycles, Si 85 nm based electrodes suffer from important cracking and exfoliation. This was confirmed by in operando dilatometry and acoustic measurements, and post mortem SEM observations.
|
8 |
Systematics of biomass burning aerosol transport over Southern AfricaMafusire, Getrude 26 June 2014 (has links)
M.Phil. (Energy Studies) / Southern Africa is a major source of regional aerosols and trace gases from biomass burning, and this creates a need for experimental validation and systematics of the magnitude and frequency of aerosol transport episodes affecting the atmosphere of the region. This study links surface measurements of biomass burning atmospheric aerosols and trace gases with air mass trajectory analysis to determine transport pathways for periods of high and low concentrations. The hypothesis of this study is that from chemical signatures of trace gases and aerosols, as well as trajectory analyses, it is possible to identify sources of these emissions from industrial, traffic, marine and biomass burning activities. Consequently, frequencies, durations, intensities and seasonal variations of trace gases can be established. The study aims to interpret the long-term atmospheric monitoring record from a remote monitoring station at Botsalano (North West Province, South Africa) to determine the origin, frequencies, durations, intensities and seasonal occurrences of aerosol/haze episodes influencing the atmosphere of southern Africa. A suite of trace gas analysers and a Differential Mobility Particle Sizer (DMPS®) were used to measure ground level trace gas and aerosol quantities. MATLAB® scripts were used in performing quality assurance and processing to provide a working set of data from which different fire periods could be selected. Fire signatures, based on excess CO above average tropospheric levels and episodes of enhanced particulate matter concentrations in the 10 to 200 nm range, were identified using MATLAB® scripts and Excel®. Altogether 36 plumes were accepted as biomass burning plumes. Twenty-nine fire plumes had weak signals with excess CO ratios ranging between 0.07 and 0.32; seven plumes had strong signals ranging between 0.41 and 0.64. The occurrence of identified biomass burning plumes was high in the dry season from May to October (83%) and low (17%) during the wet season from November to April. Four pathways were identified for the long-range transportation of biomass burning aerosols to the site: easterly, south-westerly, re-circulation and northerly modes, with occurrence frequencies of 39%, 31%, 22% and 8%, respectively. Anti-cyclonic circulation was observed over southern Africa and was evident in the re-circulation and Indian Ocean slow modes. CO and Aitken-mode aerosol number intensities were generally larger for fire emissions arriving in the easterly and south-westerly air masses when compared with those arriving in re-circulation and northerly air masses. Easterly and south-westerly flows were dominated by Aitken-mode aerosol, whereas accumulation mode particles dominated in the re-circulation and northerly modes. Consequently, easterly and south-westerly flows transported emissions from young/fresh fire plumes, with source regions probably close to Botsalano. Re-circulation and northerly flows were responsible for transport of rather aged plumes from more distant regional fires. Based on forward trajectories, this study revealed that the 2006/2007 measurement period exhibited transport features of a La Niña ENSO during which transport of biomass v burning aerosols towards the south in the Indian Ocean slow and Indian Ocean fast modes was most frequent. This study is significant in that it complements earlier studies of regional aerosol transport over the sub-continent and adds to the understanding of the regional scale generation and transport of trace substances through the atmosphere. Furthermore, the study combines a technique for identifying enhanced CO concentrations as a unique identifier of large scale biomass combustion events with the use of the Aitken-mode particle number densities and size distributions. This technique reveals aspects of aerosol growth dynamics through the changing size distributions, thereby adding fresh insights normally not available through conventional particle volume/mass concentrations measurements.
|
9 |
Wind erosion modelling system parameters to determine a practical approach for wind erosion assessmentsLiebenberg-Enslin, Hanlie 15 July 2014 (has links)
Ph.D. (Geography) / The focus of Aeolian research has mainly been on wind-blown dust from desert and arid areas. Numerous dust emission schemes have been developed over the years aimed at accurately estimating dust emission rates from various soil types and land use surfaces. Limited research has been done on wind-blown dust from smaller area sources – such as mine tailings and ash storage facilities. Lately, the concern about the environmental and health impacts, caused by dust from mine tailings storage facilities and ash disposal sites, has become more prominent, calling for better methods in determining dust emissions and their related impacts. This thesis established a practical approach for wind-blown dust emissions estimation and dispersion modelling from mine waste and ash storage facilities for the purpose of legal compliance assessment. Extensive research on the physics of wind erosion has been done over the past decade, compelling the re-evaluation of previously applied techniques. The latest and most widely applied dust emission schemes are evaluated to determine, through systematic testing of parameterisation and validation, using empirical mine waste and coal ash data, a best-practice prescription for quantifying wind-blown dust emissions and determining effects on a local scale using commercially available dispersion models. The applicability of two dust-flux schemes, (one developed by Marticorena and Bergametti (1995) and the simplified Shao 2004 scheme, as reported in 2011) for the quantification of wind-blown dust emissions, were tested using site specific particle size distribution data, bulk density and moisture content from six gold- and one platinum- tailings storage facilities and from two ash storage facilities. The availability of the required input parameters and the uncertainty associated with these parameters, were tested. The dependency of the Shao et al. (2011) model on plastic pressure (P) and the coefficient cy, both of which are not easily determined, added to the uncertainty of the emission rates. In this study, P and cy were both interpolated using the range limits provided by Shao (2004) for natural soils. By calculating P, using the salt and calcium carbonate content, similar values were obtained. The minimally disturbed dust fraction, as required by the Shao et al. (2011) scheme were derived from particle size distribution analysis but found to be more representative of the fully disturbed particle size faction (𝜂fi) and therefore needed to be corrected to represent the minimally disturbed particle size faction (𝜂mi) through the application of a correction factor, CF𝜂mi. Specific attention was given to the quantification of the threshold friction velocity (u*t) and the threshold velocities (u*), and how these two parameters relate to each under variable wind speed and time durations. This was tested using sub-hourly averaged meteorological data, one set reflected 5-minute intervals and the other 10-minute intervals. Dependent on the frequency and strength of the sub-hourly wind gusts, the resulting dust-flux rates were found to vary significantly when based on hourly averaged wind data in comparison with 5- and 10-minute wind data. Dispersion models are useful tools in air quality management. Whereas ambient monitoring provides actual ambient concentrations for specific pollutants at set locations, atmospheric dispersion models can be used to simulate any number of pollutants and determine the impacts at any location within the modelling domain. These dust-flux schemes of Marticorena and Bergametti (1995) and Shao et al. (2011) have been coupled with the US EPA regulatory Gaussian plume AERMOD dispersion model for the simulation of ground level concentrations resulting from wind-blown dust from mine tailings facilities. For this study, two Case Studies were evaluated; one included two of the gold mine tailings and the second focused on the platinum tailings. Simulated ambient near surface concentrations were validated with ambient monitored data for the same period as used in the model. For the Marticorena and Bergametti (1995) dust-flux scheme, only z0 had to be adjusted to provide a good fit with measured data – whereas the Shao et al. (2011) scheme resulted in significantly higher concentrations, resulting in an over-prediction of the measured data. By applying the correction factor, CF𝜂mi, to the minimally disturbed dust fraction, the predicted concentrations improved considerably. The coupling of the dust-flux schemes with a regulatory Gaussian plume model provided simulated ground level PM10 concentrations in good agreement with measured data. The best correlation was found under conditions of high wind speeds when the prevailing wind was from the direction of the tailings storage facility. This thesis demonstrates that simulated impacts from complex source groups can be performed, within an acceptable range of certainty, using widely applied dust-flux schemes. These dust-flux schemes, developed primarily for large-scale desert and arid areas, have been demonstrated to be applicable also to small-scale sources, of the order of 1 km2, and can be coupled to regularly available dispersion models for impact evaluations of wind-blown dust. The value of this improved approach to the mining and mineral processing industries are substantial, allowing for more accurate health risks and adverse environmental assessments from wind-blown dust from large material storage piles, a source category that has hitherto been difficult to quantify.
|
Page generated in 0.0942 seconds