Spelling suggestions: "subject:"enamel microabrasion"" "subject:"enamel microabrasión""
1 |
The clinical and microscopic effects of vital bleaching and enamel micro-abrasion on surface enamel湯翠明, Tong, Sui-ming, Lily. January 1999 (has links)
published_or_final_version / Dentistry / Doctoral / Doctor of Philosophy
|
2 |
The clinical and microscopic effects of vital bleaching and enamel micro-abrasion on surface enamel /Tong, Sui-ming, Lily. January 1999 (has links)
Thesis (Ph. D.)--University of Hong Kong, 1999. / Includes bibliographical references.
|
3 |
Remoção de irregularidades superficiais do esmalte dental após a remoção de braquetes ortodônticos : efeito de polimentos superficiais e tempos de análise /Franco, Laura Molinar. January 2017 (has links)
Orientador: Renato Herman Sundfeld / Coorientador: Lucas Silveira Machado / Banca: André Pinheiro de Magalhães Bertoz / Banca: Sergio Kiyoshi Ishikiriama / Banca: Elaine Cristina Guerbach Conti / Banca: Rodolfo Brunieira Anchieta / Resumo: O objetivo deste ensaio clínico foi avaliar o comportamento de dois sistemas de polimento na regularização da superfície do esmalte dental, que apresentava-se rugosa e irregular após a remoção de braquetes ortodônticos. As variáveis de resposta foram: rugosidade superficial, luminosidade, morfologia, textura e sensibilidade. Fizeram parte dessa pesquisa clínica 30 voluntários. Os fatores em estudo foram: as técnicas de poli- mento superficial em dois níveis: Técnica 1 (discos de óxido de alumínio) e Técnica 2 (produto ácido-abrasivo), e o tempo de análise em 5 níveis: T0 (baseline), T1 (imedia- tamente após os polimentos superficiais), T2 (após polimento final), T3 (7 dias após os procedimentos) e T4 (6 meses após os procedimentos). Os dados representados por escores foram analisados considerando distribuição multinomial; os dados numéricos foram analisados como medidas repetidas no tempo, a um nível de significância de 5%. Nas análises de rugosidade superficial e luminosidade, não houve diferença estatística entre as técnicas em todos os tempos analisados. Nas análises por score, dentro de cada tempo, verificou-se igualdade significativa apenas no baseline; nos demais tempos foram observadas irregularidades superficiais estatisticamente superiores para a Técnica 1. Nenhum paciente apresentou sensibilidade dental. Ambas as técnicas foram eficientes; porém a maior lisura foi adquirida quando a Técnica 2 foi utilizada. / Abstract: This clinical study evaluated the behavior of two surface polishing systems in the regularization of the enamel surface, which was rough and irregular after orthodontic brackets debonding. The response variables were: surface roughness, lightness, morphology, texture and sensitivity. Thirty volunteers were part of this clinical research. The factors under study were: Surface polishing at two levels: Technique 1 (aluminum oxide disks) and Technique 2 (enamel microabrasive product); and the Time of analysis at 5 levels: T0 (after surface polishing), T1 (immediately after surface polishing), T2 (after final polishing), T3 (7 days after surface polishing) and T4 (6 months after surface polishing). The data represented by scores were analyzed considering multinomial distribution; the numerical ones were analyzed as measures repeated in time, at a significance level of 5%. In the analysis of surface roughness and lightness, there was no statistical difference between the polishing techniques at all times analyzed. In the other analyzes, within each time, significant equality was observed only in the baseline, while in the other times superficial irregularities were statistically superior for Technique 1. No patient presented dental sensitivity. Both techniques were efficient; however, the higher surface smoothness was observed on the dental enamel surface polished with the Technique 2 / Doutor
|
4 |
Tensile bond strength of stainless steel orthodontic brackets on microabraded teethWentz, Holly Diane, 1965- January 1997 (has links)
Indiana University-Purdue University Indianapolis (IUPUI) / Microabrasion with PREMA Compound (Premier Dental Product Co.,
King of Prussia, Penn.) has been advocated for the removal of superficial enamel
stains. This procedure eliminates stains by removing a microscopic layer of
enamel. The objective of this study was to determine whether the use of PREMA
microabrasion prior to orthodontic bonding affects the tensile bond strength of
an adhesive precoated stainless steel orthodontic bracket. Sixty noncarious
extracted human premolar teeth were randomly divided into three groups of 20
and stored in 3-percent buffered formalin solution. Group I was a control group
that was etched and bonded in the usual manner. Group II received PREMA
Compound microabrasion immediately prior to bonding. Group III received
PREMA microabrasion followed by a six-week storage period prior to bonding.
After bonding, specimens were thermocycled and stored in distilled water at
37 °C for 14 days. The specimens were then loaded to failure in the tensile mode
of an Instron testing machine (Instron Corp., Canton, Mass.). A stress-breaking
apparatus was utilized to minimize all forces other than tensile. The data was
statistically analyzed using one-way analysis of variance at the 0.05 level. No
statistically significant differences were found among the three groups. From
these results it was concluded that microabrasion with PREMA did not affect
bond strength. Enamel microabrasion can be provided prior to orthodontic
treatment without any detriment to bracket bond strength.
|
5 |
Remoção de irregularidades superficiais do esmalte dental após a remoção de braquetes ortodônticos: efeito de polimentos superficiais e tempos de análise / Removal of enamel surface irregularities after orthodontic bracket debonding: effect of surface polishing and analysis timeFranco, Laura Molinar [UNESP] 29 August 2017 (has links)
Submitted by LAURA MOLINAR FRANCO null (lauramf3@hotmail.com) on 2017-10-02T16:32:03Z
No. of bitstreams: 1
TESE Laura 2017 Biblioteca.pdf: 3853664 bytes, checksum: 3266da5ff489ed61060498df4a53af0f (MD5) / Approved for entry into archive by Monique Sasaki (sayumi_sasaki@hotmail.com) on 2017-10-03T16:00:09Z (GMT) No. of bitstreams: 1
franco_lm_dr_araca.pdf: 3853664 bytes, checksum: 3266da5ff489ed61060498df4a53af0f (MD5) / Made available in DSpace on 2017-10-03T16:00:09Z (GMT). No. of bitstreams: 1
franco_lm_dr_araca.pdf: 3853664 bytes, checksum: 3266da5ff489ed61060498df4a53af0f (MD5)
Previous issue date: 2017-08-29 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / O objetivo deste ensaio clínico foi avaliar o comportamento de dois sistemas de polimento na regularização da superfície do esmalte dental, que apresentava-se rugosa e irregular após a remoção de braquetes ortodônticos. As variáveis de resposta foram: rugosidade superficial, luminosidade, morfologia, textura e sensibilidade. Fizeram parte dessa pesquisa clínica 30 voluntários. Os fatores em estudo foram: as técnicas de poli- mento superficial em dois níveis: Técnica 1 (discos de óxido de alumínio) e Técnica 2 (produto ácido-abrasivo), e o tempo de análise em 5 níveis: T0 (baseline), T1 (imedia- tamente após os polimentos superficiais), T2 (após polimento final), T3 (7 dias após os procedimentos) e T4 (6 meses após os procedimentos). Os dados representados por escores foram analisados considerando distribuição multinomial; os dados numéricos foram analisados como medidas repetidas no tempo, a um nível de significância de 5%. Nas análises de rugosidade superficial e luminosidade, não houve diferença estatística entre as técnicas em todos os tempos analisados. Nas análises por score, dentro de cada tempo, verificou-se igualdade significativa apenas no baseline; nos demais tempos foram observadas irregularidades superficiais estatisticamente superiores para a Técnica 1. Nenhum paciente apresentou sensibilidade dental. Ambas as técnicas foram eficientes; porém a maior lisura foi adquirida quando a Técnica 2 foi utilizada. / This clinical study evaluated the behavior of two surface polishing systems in the regularization of the enamel surface, which was rough and irregular after orthodontic brackets debonding. The response variables were: surface roughness, lightness, morphology, texture and sensitivity. Thirty volunteers were part of this clinical research. The factors under study were: Surface polishing at two levels: Technique 1 (aluminum oxide disks) and Technique 2 (enamel microabrasive product); and the Time of analysis at 5 levels: T0 (after surface polishing), T1 (immediately after surface polishing), T2 (after final polishing), T3 (7 days after surface polishing) and T4 (6 months after surface polishing). The data represented by scores were analyzed considering multinomial distribution; the numerical ones were analyzed as measures repeated in time, at a significance level of 5%. In the analysis of surface roughness and lightness, there was no statistical difference between the polishing techniques at all times analyzed. In the other analyzes, within each time, significant equality was observed only in the baseline, while in the other times superficial irregularities were statistically superior for Technique 1. No patient presented dental sensitivity. Both techniques were efficient; however, the higher surface smoothness was observed on the dental enamel surface polished with the Technique 2.
|
Page generated in 0.0807 seconds