The increasing attention towards energy efficiency issues has triggered an important process involving the renovation of existing buildings and, at the same time, the creation of recognized certifications assuring the quality of the projects. In line with this trend, the Sweco headquarters, an office building characterized by 24700 m2 of floor area and located in Stockholm, was totally retrofitted in 2012 and obtained the Gold rating after being assessed with the Miljöbyggnad certification procedure. The HVAC system was a key element of the retrofit project since one of the final aims was to combine high indoor environment standards with efficient system performances. However, even if the quality of the design is certified, it is possible that, under real operating conditions, complex systems behave differently from the expectations and adjustments are necessary to correct the emerged gap. To achieve this goal, it is essential to identify the points of weakness of the system by carrying out an energy performance analysis, which is the core of this project. In fact, after providing an overview of the building and the retrofit, this work focuses on the analysis of the cooling system installed in the Sweco building and proves the importance of adopting a step-by-step approach to the problem. Therefore, an increasing level of detail characterizes each step of the analysis, whose final aim is to highlight potential aspects to be improved and create a baseline to test possible solutions. / SIRen

Today, buildings consume 40% of total energy demand in the EU and are responsible for 36% of GHG emissions. For this reason, and due to the delicate situation of climate change that planet Earth is experiencing, solutions are being sought to make the building sector more sustainable. In the current project, the use of natural materials has been chosen as a solution in line with the EU 2050 long-term strategy. This research broadens the knowledge on sustainable building with natural materials as an alternative to conventional construction. To this end, first, an extensive state of the art has been carried out to gather information and identify research gaps on natural building materials and energy efficiency, proving the suitability of natural construction materials. Special emphasis has been put on straw bale construction and rammed earth construction, which have been studied individually. In addition, geometrically identical building models of both building techniques have been developed and simulated in Stockholm and Valencia in order to see how they would perform in different climates. Total energy demand for the straw-bale building of 140.22 kWh/(m2·year) in the case of Stockholm and 37.05 kWh/(m2·year) in the case of Valencia has been obtained. For the rammed earth building, a total demand of 301.82 kWh/(m2·year) has been obtained in Stockholm and 78.66 kWh/(m2·year) in Valencia. Once passive measures are applied in the different models, a reduction in demand for the straw bale building of 77.8% and 36.3% has been achieved for Stockholm and Valencia, respectively. In the rammed earth building, in contrast, the demand has been reduced by 86.3% in Stockholm and 73.9% in Valencia. Heat recovery ventilation and high insulation level have been identified as imperative needs in Stockholm, in contrast to Valencia. Other improvement strategies such as windows substitution, air permeability improvement, or natural ventilation for cooling have been implemented. Apart from that, better performance of the straw-bale buildings has been identified for both climates. Additionally, focusing on thermal inertia, its influence has been identified as not completely significant in terms of annual demand in the simulated climates.