Spelling suggestions: "subject:"ethernet (local are network system)"" "subject:"ethernet (focal are network system)""
21 |
Network simulation for professional audio networksOtten, Fred January 2015 (has links)
Audio Engineers are required to design and deploy large multi-channel sound systems which meet a set of requirements and use networking technologies such as Firewire and Ethernet AVB. Bandwidth utilisation and parameter groupings are among the factors which need to be considered in these designs. An implementation of an extensible, generic simulation framework would allow audio engineers to easily compare protocols and networking technologies and get near real time responses with regards to bandwidth utilisation. Our hypothesis is that an application-level capability can be developed which uses a network simulation framework to enable this process and enhances the audio engineer’s experience of designing and configuring a network. This thesis presents a new, extensible simulation framework which can be utilised to simulate professional audio networks. This framework is utilised to develop an application - AudioNetSim - based on the requirements of an audio engineer. The thesis describes the AudioNetSim models and implementations for Ethernet AVB, Firewire and the AES- 64 control protocol. AudioNetSim enables bandwidth usage determination for any network configuration and connection scenario and is used to compare Firewire and Ethernet AVB bandwidth utilisation. It also applies graph theory to the circular join problem and provides a solution to detect circular joins.
|
22 |
Short-term Ethernet traffic prediction using a Kalman filterVanderbilt, Marisin C. 01 October 2000 (has links)
No description available.
|
23 |
Carrier ethernet network solutions: transport protocol and optical backplane designEstevez, Claudio Ignacio 15 January 2010 (has links)
The Metro Ethernet network (MEN) expands the advantages of Ethernet to cover areas wider than LAN. MENs running Ethernet Services as specified by the Metro Ethernet Forum (MEF) are known as Carrier Ethernet Networks (CENs). CENs can cover not only metro areas, but it can expand to cover global areas by connecting multiple MENs. Next-generation CENs are expected to support 100 GbE. With arising technologies for Ultra Long-haul (ULH) networks the bandwidth bottleneck of CENs is shifting to other areas like the transport layer protocol (such as the Transport Control Protocol or TCP) and the chip-to-chip channel capacity found at the network edge, which in general has an electrical backplane. Traditional TCP is well known to have difficulties reaching the full available bandwidth, due to its inefficient AIMD mechanisms under a high-delay-bandwidth-product environment. At the network edge, network equipment with electrical backplanes poses many problems including inductive-capacitive effects that limit its bandwidth. These are the two main issues addressed in this work. To resolve the transport layer issue, this work proposes a transport protocol that fully utilizes the available bandwidth while preserving TCP-friendliness and providing QoS support that is compatible with Ethernet Services. It can guarantee throughputs above the Committed Information Rate (CIR), which is specified in the Service Level Agreement (SLA). To resolve the physical layer limitations, a novel optical coupling technique is examined to encourage the use of optical backplanes for network-edge and core technology. The proposed technique consists of aligning the normal of the laser emission plane, waveguide plane and the normal of the photodetector active region plane with the purpose of reducing optical power loss caused by common methods of light manipulation. By addressing the shortcomings of both Traditional TCP and electrical backplane technology the overall throughput can be significantly increased.
|
24 |
Testbed evaluation of integrating ethernet switches in the differentiated services architecture using virtual LANsFornaro, Antony 05 1900 (has links)
No description available.
|
25 |
Ethernet controller design for an embedded system using FPGA technologyGroom, Eddie L. January 2008 (has links) (PDF)
Thesis (M.S.)--University of Alabama at Birmingham, 2008. / Description based on contents viewed Oct. 7, 2008; title from PDF t.p. Includes bibliographical references (p. 80-81).
|
26 |
Towards a distributed real-time system for future satellite applicationsRozendaal, A. (Abraham) 12 1900 (has links)
Thesis (MScEng)--University of Stellenbosch, 2003. / ENGLISH ABSTRACT: The Linux operating system and shared Ethernet are alternative technologies with the potential to
reduce both the development time and costs of satellites as well as the supporting infrastructure.
Modular satellites, ground stations and rapid proto typing testbeds also have a common
requirement for distributed real-time computation. The identified technologies were investigated
to determine whether this requirement could also be met.
Various real-time extensions and modifications are currently available for the Linux operating
system. A suitable open source real-time extension called Real-Time Application Interface
(RTAI) was selected for the implementation of an experimental distributed real-time system.
Experimental results showed that the RTAI operating system could deliver deterministic realtime
performance, but only in the absence of non-real-time load.
Shared Ethernet is currently the most popular and widely used commercial networking
technology. However, Ethernet wasn't developed to provide real-time performance. Several
methods have been proposed in literature to modify Ethernet for real-time communications. A
token passing protocol was found to be an effective and least intrusive solution. The Real-Time
Token (RTToken) protocol was designed to guarantee predictable network access to
communicating real-time tasks. The protocol passes a token between nodes in a predetermined
order and nodes are assigned fixed token holding times. Experimental results proved that the
protocol offered predictable network access with bounded jitter.
An experimental distributed real-time system was implemented, which included the extension of
the RTAI operating system with the RTToken protocol, as a loadable kernel module. Real-time
tasks communicated using connectionless Internet protocols. The Real-Time networking (RTnet)
subsystem of RTAI supported these protocols. Under collision-free conditions consistent
transmission delays with bounded jitter was measured. The integrated RTToken protocol
provided guaranteed and bounded network access to communicating real-time tasks, with limit
overheads. Tests exhibited errors in some of the RTAI functionality. Overall the investigated
technologies showed promise in being able to meet the distributed real-time requirements of
various applications, including those found in the satellite environment. / AFRIKAANSE OPSOMMING: Die Linux bedryfstelsel en gedeelde Ethernet is geïdentifiseer as potensiële tegnologieë vir
satelliet bedryf wat besparings in koste en vinniger ontwikkeling te weeg kan bring. Modulêr
ontwerpte satelliete, grondstasies en ontwikkeling platforms het 'n gemeenskaplike behoefte vir
verspreide intydse verwerking. Verskillende tegnologieë is ondersoek om te bepaal of aan die
vereiste ook voldoen kan word.
Verskeie intydse uitbreidings en modifikasies is huidiglik beskikbaar vir die Linux bedryfstelsel.
Die "Real-Time Application Interface" (RTAI) bedryfstelsel is geïdentifiseer as 'n geskikte
intydse uitbreiding vir die implementering van 'n eksperimentele verspreide intydse stelsel.
Eksperimentele resultate het getoon dat die RTAI bedryfstelsel deterministies en intyds kan
opereer, maar dan moet dit geskied in die afwesigheid van 'n nie-intydse verwerkingslas.
Gedeelde Ethernet is 'n kommersiële network tegnologie wat tans algemeen beskikbaar is. Die
tegnologie is egter nie ontwerp vir intydse uitvoering nie. Verskeie metodes is in die literatuur
voorgestelom Ethernet te modifiseer vir intydse kommunikasie. Hierdie ondersoek het getoon
dat 'n teken-aangee protokol die mees effektiewe oplossing is en waarvan die implementering
min inbreuk maak. Die "Real-Time Token" (RTToken) protokol is ontwerp om voorspelbare
netwerk toegang tot kommunikerende intydse take te verseker. Die protokol stuur 'n teken tussen
nodusse in 'n voorafbepaalde volgorde. Nodusse word ook vaste teken hou-tye geallokeer.
Eksperimentele resultate het aangedui dat die protokol deterministiese netwerk toegang kan
verseker met begrensde variasies.
'n Eksperimentele verspreide intydse stelsel is geïmplementeer. Dit het ingesluit die uitbreiding
van die RTAI bedryfstelsel met die RTToken protokol; verpak as 'n laaibare bedryfstelsel
module. Intydse take kan kommunikeer met verbindinglose protokolle wat deur die "Real-Time
networking" (RTnet) substelsel van RTAI ondersteun word. Onder ideale toestande is konstante
transmissie vertragings met begrensde variasies gemeet. Die integrasie van die RTToken
protokol het botsinglose netwerk toegang aan kommunikerende take verseker, met beperkte
oorhoofse koste as teenprestasie. Eksperimente het enkele foute in die funksionaliteit van RTAI
uitgewys. In die algemeen het die voorgestelde tegnologieë getoon dat dit potensiaal het vir
verskeie verspreide intydse toepassings in toekomstige satelliet en ook ander omgewings.
|
27 |
A low-cost man-portable free-space optics communication device for Ethernet applicationsPerera, Janaka P. 12 1900 (has links)
Approved for public release, distribution is unlimited / This thesis sought to design and implement a low-cost, portable, Free-Space Optics (FSO) communications device for Ethernet applications. Under some circumstances such a device would have utility at a Combat Operations Center (COC), a Field Artillery Position, or wherever else fiber optic cable is used in garrison or field. The design was based on commercial off the shelf components originally designed for fiber optic applications. Based on a 155 megabits per second (Mbps) media converter, the design used two fiber optic transceivers, coupled to collimating lenses to pass data over free-space. Sustained data rate of 100 Mbps was achieved with full network functionality on the optical bench with a low-power (0.5mW) laser diode transmitter without focusing optics on the receiver. The laser diode power(mounted on device), was measured with acceptable losses up to 300 ft during testing using a photodiode with focusing optics. The findings indicate that the system with proper collecting optics could be optimized for free-space communication at short to moderate ranges. / Captain, United States Marine Corps
|
28 |
Advanced link and transport control protocols for broadband optical access networksXiao, Chunpeng 13 November 2006 (has links)
The objective of this dissertation is to improve the service quality of broadband optical access networks by developing advanced link- and transport- layer protocols. Current access technologies represent a significant bottleneck in bandwidth and service quality between a high-speed residential/enterprise network and a largely overbuilt core network. Although it is believed that passive optical network (PON) will be the most promising solution to provide truly broadband connections to end users, a suit of protocols are required to provide quality of service (QoS). In this dissertation, we design a new reservation MAC scheme that arbitrates upstream transmission, prevents collisions, and varies bandwidth according to demand and priority. The new access scheme exploits both WDM and TDM to cater for both light and heavy bandwidth requirements. Next, we introduce delta compression as an efficient method for fast content download. In the third part of this dissertation, we enhance the transport performance of Ethernet services by addressing the throughput optimization issue at the edge of the network. A novel SLA-aware transport control scheme is proposed to utilize reserved bandwidth more efficiently using a shifted additive increase multiplicative decrease (AIMD) algorithm, and to detect congestion more accurately based on hypothesis test. The performance of the proposed scheme is compared with traditional TCP through theoretical analyses and simulations.
|
29 |
Wireless communications infrastructure for collaboration in common spaceMetingu, Kivanc 03 1900 (has links)
Approved for public release, distribution is unlimited / Modern technology is making virtual environments a part of daily life. However, some constraints about the usage of virtual environments, such as the need for high performance and well-configured computers, prevent users from accessing virtual environments in some places other than special computer rooms. Mobile devices may be used to solve this limitation in a virtual environment. The remote-control approach to access virtual worlds on the Internet or on a corporate network is a new concept that opens new doors to users. First step of this approach is already in use, such as games implemented for mobile devices using the screen of a mobile device as display, and has given satisfying results for some users. This research will take the user, who not only wants to be mobile but also does not want to sacrifice high resolution textures and complex models, closer to his/her goal. Mobile devices provide mobility to the user, but sacrifice not only the reality of the virtual environments but also screen size, which is very important for visibility of complex virtual environments. The hybrid approach with wireless internet connection by using mobile devices as remote control gives the user the advantages of mobility over desktop PCs. On the other hand, the realism provided by high-quality PCs on the server side exceeds the capabilities of mobile devices. / Lieutenant Junior Grade, Turkish Navy
|
30 |
Highly variable real-time networks: an Ethernet/IP solution and application to railway trainsConstantopoulos, Vassilios 03 July 2006 (has links)
In this thesis we study the key requirements and solutions for the feasibility and application of Ethernet-TCP/IP technology to the networks we termed Highly-Variable Real-Time Networks (HVRN). This particular class of networks poses exceptionally demanding requirements because their physical and logical topologies are both temporally and spatially variable. We devised and introduced specific mechanisms for applying Ethernet-TCP/IP to HVRNs with particular emphasis on effective and reliable modular connectivity. Using a railroad train as a reference, this work analyzes the unique requirements of HVRNs and focuses on the backbone architecture for such a system under Ethernet and TCP/IP. / Doctorat en sciences appliquées / info:eu-repo/semantics/nonPublished
|
Page generated in 0.1149 seconds