Poly(2-ethyl-2-oxazoline) (PEOX) is a nonionic, synthetic polymer which is soluble in both a variety organic solvents and water. The negative entropy of mixing of this polymer in aqueous solution suggested that it adopts a rigid conformation such as a helix in aqueous solution. Hydrogen bonding between PEOX and water molecules is thought to facilitate a special conformation that is specific to aqueous solution. The intent of this work is to investigate the conformation of PEOX in aqueous solution and consequently propose the mechanism by which it would adsorb onto cellulose and make it a valuable additive in paper processing. This work ultimately contributes to the greater matter of understanding the mechanisms by which water solvates nonionic polymers. Viscometry measurements of PEOX in water show that its shape scales similar to a random coil and that its molecules collapse in the presence of sodium chloride. Investigation into the molecular structure of PEOX through molecular scale simulations have revealed that although a rigid helical conformation does not exist, the potential exists for PEOX to have secondary helical structure in both water and other solvents. Without the rigid predicted structure, however, it is not surprising that PEOX does not adsorb well on cellulose. Comparing this folded helical conformation to a random coil conformation reveals that the random coil produces a lower energy system in water.

The research presented in this thesis focuses on the synthesis of three amphiphilic block copolymer systems containing poly(ethylene oxide) (PEO) blocks. The polymer systems were developed for use in biomedical applications. The first of these is a series of poly(ethylene oxide-b-oxazoline) (PEO-b-POX) diblock copolymers for use in the progress towards novel non-viral gene transfer vectors. Poly(ethylene oxide-b-2-ethyl-2-oxazoline) (PEO-b-PEOX) and poly(ethylene oxide-b-2-methyl-2-oxazoline) (PEO-b-PMOX) were investigated. The PEOX block was hydrolyzed with acid to form linear polyethylenimine (L-PEI). The polycation L-PEI is well known for its DNA binding efficiency but the water solubility of the resulting DNA/polymer complex is limited. Addition of a PEO block is directed towards the formation of a water dispersible DNA/copolymer complex. Dynamic light scattering of the PEO-b-PEOX and PEO-b-PEI block copolymers indicated that both systems existed as single chains in aqueous solution at pH 7. PEO copolymers also play a significant role in the formation of magnetic magnetite nanoparticles, which are dispersible in water at biological pH (pH =7). There is significant interest in the design of magnetic nanoparticle fluids for biomedical applications including magnetic field-directed drug delivery, magnetic cell separations, and blood purification. For use in vivo, the magnetite nanoparticles must be coated with biocompatible materials. Such polymers render the nanoparticles dispersible in water. Harris1 et al. synthesized PEO based, polyurethane triblocks with pendant carboxylic acid groups for use in formation of stable aqueous magnetic fluids. Building from this work, two polyurethane and polyurethaneurea systems were synthesized with 1300 g/mol PEOX and 2500 g/mol and PEOX2070 g/mol poly(ethylene oxide-co-propylene oxide) tailblocks, respectively. The PEO/PPO random copolymer contained about 25 weight percent PPO, and this disrupted the capacity of the PEO to crystallize. The PEOX based urethane triblocks were synthesized through reacting the tailblocks with the monomers for the center block whereas the PEO/PPO based polyurethaneurea was synthesized through forming the central urethane block with pendant acid groups first and then terminating the copolymer with the monofunctional copolymer. Terminal amine groups on the PEO/PPO tailblock afforded a triblock linked with two urea groups. The new polyurethanes with the PEOX tailblocks and the new polyurethaneurea with the PEO/PPO tailblocks could be utilized to efficiently stabilize magnetite nanoparticles in water. / Master of Science

Poly(ethylene oxide) (PEO) and poly(2-ethyl-2-oxazoline) (PEOX) are biocompatible polymers that act as hydrophilic "stealth" drug carriers. As block copolymers, the PEOX group offers a wider variety of functionalization. The goal of this project was to synthesize a poly(ethylene oxide)-b-poly(2-ethyl-2-oxazoline) (PEO-b-PEOX) block copolymer and functionalize pendent groups of PEOX with phosphonic acid. This was achieved through cationic ring opening polymerization (CROP) of 2-ethyl-2-oxazoline monomer onto PEO. These polymerizations used tosylsulfonyl chloride as initiator. Size-exclusion chromatography (SEC) was used to determine the molecular weights of the block copolymers. Two samples of 1:2 and one sample of 1:3 of PEO-to-PEOX block copolymers were made. These samples underwent partial hydrolysis of the PEOX pendent groups to form the random block copolymer, poly(ethylene oxide)-b-poly(2-ethyl-2-oxazoline)-co-poly(ethyleneimine) (PEO-b-PEOX-co-PEI). These reactions showed that there was a degree of control based on the moles of acid. Diethyl vinyl phosphonate was attached to the nitrogen of PEI units via Michael addition where the phosphorylation left <1% of PEI units unattached. The ethyl groups on the phosphonates were further hydrolyzed off phosphonate with HCl acid leaving phosphonic acid. After each step of synthesis, structures and composition were confirmed using ¹H NMR. Due to the nature of the phosphonic acid, the polymer can be utilized in the incorporation and release of cationic drugs. / Master of Science

This dissertation focuses on the synthesis and characterization of functional poly(2-ethyl-2-oxazoline) (PEtOx) containing homo- and block copolymers that are potential materials for membrane-based water purification and gas separation, drug delivery, magnetic resonance imaging and tissue engineering applications. The polymerization of 2-ethyl-2-oxazoline (EtOx) was investigated with regard to the effects of initiator structures and reaction parameters such as polymerization time and temperature on molecular weight control and molecular weight distribution, endgroup functionality, living characteristics, and mechanism and kinetics. The structure of initiators was shown to significantly affect the molecular weight control and molecular weight distribution of PEtOx oligomers. Methyl triflate initiated polymerizations were found to result in oligomers with low polydispersity (PDI) values around 1.10-1.15 and symmetrical chromatograms were obtained via size exclusion chromatography (SEC) studies with the use of refractive index, light scattering and viscosity detectors. However, EtOx polymerizations initiated by halide containing initiators such as benzyl chloride, dibromo- and diiodo-p-xylene, and vinylsilylpropyl iodides yielded PEtOx oligomers with higher PDI values ~ 1.30-1.40. Higher molecular weight distributions can be attributed to the presence of covalent species during polymerization and slower initiation rate as evidenced by kinetic studies when compared to PEtOx prepared from methyl triflate initiators. In all cases, termination reactions with aliphatic cyclic amines were quantitative. Mono- and diamine functional PEtOx oligomers with controlled molecular weight and excellent end-group functionality may be used as prepolymers for incorporation into multiblock and graft copolymer and crosslinked structures for a variety of applications such as membranes and hydrogels for tissue engineering matrices. Poly(2-ethyl-2-oxazoline) containing block copolymers were prepared using the macroinitiator method. First, amphiphilic triblock copolymers with hydrophobic poly(arylene ether sulfone) (PSF) central block and hydrophilic PEtOx side blocks were synthesized via polymerization of EtOx sequences from tosylate functional telechelic PSF macroinitiators. PSFs are well-known engineering thermoplastics with excellent resistance to hydrolysis and oxidation, as well as displaying good mechanical properties, thermal stability and toughness. Phenol functional PSFs were prepared via step-growth polymerization of dichlorodiphenylsulfone and bisphenol-A (slight excess) monomers. Phenolic chain ends were then converted to aliphatic hydroxyethyl endgroups by reaction with ethylene carbonate. Upon treatment with p-toluenesulfonyl chloride, tosylate functional PSF macroinitiators were prepared. PEtOx-b-PSF-b-PEtOx triblock copolymers (pendent acyl groups of PEtOx side blocks) were partially hydrolyzed in an acidic medium to introduce random charged poly(ethylene imine) units to prepare ionomer structures that may show good salt rejection, water flux and antibacterial properties for membrane-based water purification applications. Phosphonic acid modified poly(ethylene oxide)-b-poly(2-ethyl-2-oxazoline) (PEO-b-PEtOx) diblock copolymers were prepared via cationic ring opening polymerization of EtOx monomers from tosylate functional PEO macroinitiators and subsequent functionalization reactions on the polyoxazoline block. Post-modification reactions included controlled partial pendent acyl group hydrolysis under an acidic medium to form the random block copolymers of PEtOx and poly(ethyleneimine) (PEI), Michael addition of diethylvinyl phosphonate groups to PEI units and hydrolysis of the ethyl groups on the phosphonates to yield pendent phosphonic acid groups on the polyoxazoline block. After each step of functionalization reactions, structures and compositions were confirmed utilizing 1H NMR and the degree of phosphorylation was found to be > 95%. Both PEO and PEtOx are biocompatible polymers and the anionic quality of the phosphonic acid has the potential to be pH controllable and provide an environment where cationic drugs and contrast agents can be attached. Thus, these polymers have potential as drug carriers and contrast enhancement agents for magnetic resonance imaging applications. / Ph. D.

Made available in DSpace on 2017-07-24T19:38:04Z (GMT). No. of bitstreams: 1 Mariana Negrelli.pdf: 2632259 bytes, checksum: 8ffb18e87e90aff84b82a1268dc4596f (MD5) Previous issue date: 2011-02-25 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / This work describes the conformational analysis of cis/trans ethyl-2 hydroxycyclohexanecarboxylate. For this, were analyzed data obtained by ab initio theoretical calculations, the nuclear magnetic resonance spectroscopy (coupling constants 3JHH) and infrared (carbonyl stretch). Were performed calculations for the isolated molecule and calculations with solvation routines to assess the conformational preference in different ways. With the aid of maps of electrostatic potential, was possible to observe the main negative centers where are located the reactive sites involved in organic synthesis. According to the calculations of NBO was analyzed how interactions affect the stability of each conformation. The compounds cis/trans ethyl-2-hydroxycyclohexanecarboxylate presented each, two preferred conformers, which were observed by both theoretical calculations and IR. The NMR spectroscopy was very useful because with the use of the same was possible to characterize the majority conformer of each equilibrium. / Neste trabalho é apresentado o estudo conformacional do cis/trans-2-hidroxicicloexanocarboxilato de etila. Para tanto, foram realizadas análises a partir de dados obtidos pelos cálculos teóricos ab initio e pelas espectroscopias de ressonância magnética nuclear (constantes de acoplamento 3JHH) e na região do infravermelho (estiramento da carbonila). Foram realizados cálculos para a molécula isolada bem como cálculos com rotinas de solvatação, para avaliar a preferência conformacional em diferentes meios. Com o auxílio de mapas de potencial eletrostático, foi possível observar os principais centros negativos onde estão localizados os sítios reativos envolvidos em sínteses orgânicas. Pelos cálculos de NBO, foi analisado como as interações afetam a estabilidade de cada conformação. Os compostos cis/trans-2-hidroxicicloexanocarboxilato de etila apresentaram cada um, dois confôrmeros preferenciais, os quais foram observados tanto pelos cálculos teóricos como por IV. A espectroscopia de RMN foi muito útil, pois com o emprego da mesma foi possível caracterizar o confôrmero majoritário de cada equilíbrio.

Size exclusion chromatography is the method of choice for characterizing molecular weights and molecular weight distributions of polymers. An important advancement in SEC is multidetection SEC which includes multi-angle laser light scattering, viscometry, refractive index and UV spectroscopy to analyze block and graft copolymers as well as polymers with oligomeric molecular weights. Oligomeric molecular weights present special challenges since the light scattering and viscosity detectors are more sensitive to higher molecular weights and both detectors have low molecular weight threshold values. The molecular weights and distributions of poly(2-ethyl-2-oxazoline) oligomers and block copolymers as well as poly(2-ethyl-2-oxazoline) were investigated by SEC using multiple detectors. Both a universal calibration method and light scattering were used to determine molecular weights and molecular weight distributions. The solvent was N-methylpyrrolidone that contained 0.05M LiBr used to minimize interactions among the polymers and solvent. SEC was used to establish that the diblock copolymers had heterogeneous compositional distributions. The low molecular weights of the diblock and homopolymer made it necessary to use the universal calibration method with combined refractive index and viscometry detectors to determine absolute molecular weights. / Master of Science

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal.

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

The performance and lifetime of lithium-ion batteries are strongly influenced by their composition. One category of critical components are electrolyte additives, which are included primarily to stabilize electrode/electrolyte interfaces in the battery cells by forming passivation layers. The presented study aimed to identify and study such an additive that could form a hydrogen-evolution-suppressing solid electrolyte interphase (SEI) in lithium-ion batteries based on aqueous electrolytes. A promising molecular additive, ethyl 2,2-difluoroacetate (EDFA), was found to hold the qualities required for an SEI former and was herein further analyzed electrochemically. Analysis of the battery cells were performed with linear sweep voltammetry and cyclic voltammetry with varying scan rate and EDFA concentrations. Results show that both 1 and 10 w-% EDFA in the electrolyte produced hydrogen-evolution-suppressing SEI:s, although the higher concentration provided no apparent benefit. Lithium-ion full-cells based on LiMn2O4 vs. Li4Ti5O12 active materials displayed poor, though partly reversible, dis-/charge cycling despite the operation of the electrode far outside the electrochemical stability window of the electrolyte. Inclusion of reference electrodes in the lithium-ion cells proved to be immensely challenging with unpredictable drifts in their electrode potentials during operation. To summarize, HER-suppressing electrolyte additives are demonstrated to be a promising approach to stabilize high-voltage operation of aqueous lithium-ion cells although further studies are necessary before any practical application thereof can be realized. Electrochemical evaluation of the reaction mechanism and efficiency of the electrolyte additives relies however heavily on the use of reference electrodes and further development thereof is necessary.