This thesis presents a distributed power-management architecture for concentrating photovoltaic (CPV) systems. Specifically, the Δ-conversion scheme with voltage equalization is analyzed and verified for the CPV system from Morgan Solar, Inc. This architecture uses inverting buck-boost converters, denoted Δ-converters, which equalize the voltages of neighbouring CPV cells in a series-connected string of cells and improve the systems tolerance to parameter variations. The power benefits of Δ-conversion and the Δ-converter current distributions are investigated using statistical simulations. The effectiveness of Δ-conversion in the presence of randomly distributed mismatches is demonstrated, and current cascading is identified as the main design challenge. The Δ-converter is modelled and compensated using Middlebrook's Extra Element Theorem. Analysis of measured data from a six-cell CPV system demonstrate the benefits of Δ-conversion under realistic scenarios. Experimental results from prototype systems show up to 31% power benefits in the presence of mismatches.

Nowadays, the number of applications which need more than one power source is increasing. Distributed generating systems or micro-grid systems normally use more than one power source or more than one kind of energy source. Also, to increase the utilization of renewable energy sources, diversified energy source combination is recommended. For example, a wind-photovoltaic generating system, a combination of a wind generator and photovoltaic array, can give a greater degree of freedom when choosing the install location. The combination of more power sources and diversified power sources makes it possible to obtain higher availability in a power system. A parallel connection of converters has been used to integrate more than one energy source in a power system. However, a multiple-input converter (MIC) can generally have the following advantages compare to a combination of several individual converters; (1) cost reduction, (2) compactness, (3) more expandability and (4) greater manageability. First, this research suggests MIC topology comparison criteria that can be used as a decision guide for choosing a MIC topology depending on the application. Even though there are some MIC topology classification methods such as by the kind of combining methods, the classification methods are not enough to choose one particular topology. The comparison criteria presented in this dissertation are practical enough to decide which topology is suitable and should be chosen. Second, a new MI modified inverse Watkins-Johnson converter (MIMIWJC) without a coupled inductor is proposed. The circuit configuration of this converter and its operation principles are described, including the open-loop and closed-loop circuit. For control purposes, a small signal model of the proposed converter is developed using Middlebrook’s extra element theorem. In addition, two possible control methods are introduced in this dissertation. Finally, the theoretical analysis of the proposed converter is verified with simulations and experiments. / text

This thesis presents a distributed power-management architecture for concentrating photovoltaic (CPV) systems. Specifically, the Δ-conversion scheme with voltage equalization is analyzed and verified for the CPV system from Morgan Solar, Inc. This architecture uses inverting buck-boost converters, denoted Δ-converters, which equalize the voltages of neighbouring CPV cells in a series-connected string of cells and improve the systems tolerance to parameter variations. The power benefits of Δ-conversion and the Δ-converter current distributions are investigated using statistical simulations. The effectiveness of Δ-conversion in the presence of randomly distributed mismatches is demonstrated, and current cascading is identified as the main design challenge. The Δ-converter is modelled and compensated using Middlebrook's Extra Element Theorem. Analysis of measured data from a six-cell CPV system demonstrate the benefits of Δ-conversion under realistic scenarios. Experimental results from prototype systems show up to 31% power benefits in the presence of mismatches.