Thesis (M.S.)--University of Texas at El Paso, 2009. / Title from title screen. Vita. CD-ROM. Includes bibliographical references. Also available online.

Thesis (M.S.)--Missouri University of Science and Technology, 2009. / Vita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed November 17, 2009) Includes bibliographical references (p. 83-84).

No description available.

The study of magnetic properties and structures of Zn and Cd substituted mixed ferrites has been carried out using Mossbauer spectroscopy and X-ray diffraction on powdered samples at about 300 K. Two series of mixed ferrites, (Cd, Zn)xCol-xFe2-xAlxO4 and (Cd, Zn)xCo0.9Fe1.7-xTi0.4O 4 (where 0≤ x≤1.0) were synthesized. In the former series the effect of simultaneous site dilution by Zn or Cd and Ai atoms on tetrahedral (A) and octahedral (B) sites is investigated and in the latter the effect of single site dilution by Zn or Cd is also studied. The Mossbauer spectra show that the compounds transform with increase in x from ordered to disordered magnetic states. Systematic decrease in the hyperfine fields indicating weakening of the magnetic coupling with an increase in x is observed. We report the presence of a cross over effect with respect to the hyperfine fields on A and B sites at low concentration of diamagnetic ions in the simultaneously diluted series. Both series of compounds show no significant changes in isomer shifts with x. Differences in the evolution of Fe atoms on A and B sites between Zn and Cd based compounds are observed. The results of our analysis show that Zn and Cd ions occupy both tetrahedral and octahedral sites. The spinel structure of the compounds studied in this work is confirmed by X-ray diffraction (XRD). The lattice parameters derived from XRD show systematic change with x consistent with Vergard's law. In Cd based samples an increase of the lattice parameter with x is explained on the basis of the size difference of the cations involved. However, an anomalous behavior of the lattice parameter is observed in Zn based samples. The average grain sizes of the samples were determined from the line width of the (311) XRD intensity lines using the Scherrer formula. These vary between 50 nm and 70 nm for all the samples except for Zn and Al substituted samples which show a systematic anomalous reduction for x ≥ 0.4 in grain size. The porosity, x-ray and bulk densities of the samples are also presented. / Thesis (M.Sc.)-University of Natal, Durban, 2002.

No description available.

Thesis (Ph. D.)--Virginia Polytechnic Institute and State University, 1992. / Vita. Abstract. Includes bibliographical references (leaves 227-250). Also available via the Internet.

Thesis (M.S.)--Rochester Institute of Technology, 2006. / Typescript. Includes bibliographical references (leaves 102-103).

Studies to compare and elucidate some of the surface chemical characteristics of chromium dioxide and barium ferrite magnetic particles have been performed. These investigations primarily involved using the technique of flow microcalorimetry to look at the interaction of molecular probes (pyridine, 4-nitrophenol) and various components present in a magnetic ink (dispersants and model binder compounds) with the particles. The interactions were measured in terms of heats of adsorption and adsorption density. Ancillary experiments using FTIR and XPS were also performed. Both electrophoretic measurements and calorimetric studies showed that stabilized CrO₂ was less acidic than un-stabilized CrO₂. Similar measurements showed that un-doped barium ferrite was more acidic than Co and Ti doped barium ferrite. The interactions of dispersants and model binder components with barium ferrite were found to be very exothermic; heats of interaction of greater than -20 kcal/mole were not uncommon. Subsequent analysis of barium ferrite particles treated with dispersants and binder compounds using FTIR and XPS suggested that these compounds formed chemical complexes on the surface of the ferrite particles.

An impedance-based core loss measurement technique for power ferrites, the modeling and analysis of mechanisms of high-frequency losses, and design methodology for optimization for high-frequency magnetics are presented. The high-frequency losses of ferrite materials are characterized employing a large-signal impedance measurement technique. The impedance analyzer controlled through an IEEE-488 interface, measures the impedance of the inductor under test under large signal excitation via a power amplifier. The core loss is a form of a parallel resistance is derived from measured impedance characteristics. A wideband impedance probe, enables core loss characterization up to 100 MHz. A comprehensive analysis of all major loss mechanisms in ferrites is presented. A new form of residual losses due to a magnetoelectric effect is postulated to account for losses at high frequencies. Two models of losses in ferrites are proposed, one with emphasis on analysis of loss mechanisms, and the other with an emphasis on the design of high-frequency magnetic components. Both models include the important effect of static bias field, which is the case in many power electronics applications. Magnetic losses due to magnetostriction are measured. Dependence of magnetoelastic resonances on the magnetic bias. core material, core shape and size is studied. The influence of diffusion after-effect on core loss under time-varying bias field is investigated. Thermal stability of high-frequency magnetics is studied. A verification of one- and two- dimensional models of winding losses for solid and litz wire is performed. The optimum design method for high-frequency power transformers and inductors is proposed. / PhD

Size and Shape Controlled Synthesis and Superparamagnetic Properties of Spinel Ferrites Nanocrystals Qing Song 216 pages Directed by Dr. Z. John Zhang The correlationship between magnetic properties and magnetic couplings is established through the investigations of various cubic spinel ferrite nanocrystals. The results of this thesis contribute to the knowledge of size and shape controlled synthesis of various spinel ferrites and core shell architectured nanocrystals as well as the nanomagnetism in spinel ferrites by systematically investigating the effects of spin orbital coupling, magnetocrystalline anisotropy, exchange coupling, shape and surface anisotropy upon superparamagnetic properties of spinel ferrite nanocrystals. A general synthetic method is developed for size and shape control of metal oxide nanocrystals. The size and shape dependent superparamagnetic properties are discussed. The relationship between spin orbital coupling and magnetocrystalline anisotropy is studied comparatively on variable sizes of spherical CoFe2O4 and Fe3O4 nanocrystals. It also addresses the effect of exchange coupling between magnetic hard phase and soft phase upon magnetic properties in core shell structured spinel ferrite nanocrystals. The role of anisotropic shapes of nanocrystals upon self assembled orientation ordered superstructures are investigated. The effect of thermal stability of molecular precursors upon size controlled synthesis of MnFe2O4 nanocrystals and the size dependent superparamagnetic properties are described.