Research is performed to assess the potential of surface moisture evaporative cooling from composite plates as a means of reducing the external temperature of military aircraft. To assess the feasibility of evaporative cooling for this application, a simplified theoretical model of the phenomenon is formulated. The model consists of a flat composite plate at an initial uniform temperature, T0. The plate also possesses an initial moisture (molecular water) content, M0. The plate is oriented vertically and at t=0 s, one surface is exposed to a free stream of air at an elevated temperature. The other surface is exposed to stagnant air at the same temperature as the plate’s initial temperature. The equations associated with energy and mass transport for the model are developed from the conservation laws per the continuum mechanics hypothesis. Constitutive equations and assumptions are introduced to express the two nonlinear partial differential equations in terms of the temperature, T, and the partial density of molecular water, ρw. These equations are approximated using a weak form Galerkin finite element formulation and the α–family of time approximation. An algorithm and accompanying computer program written in the Matlab programming language are presented for solving the nonlinear algebraic equations at successive time steps. The Matlab program is used to generate results for plates possessing a variety of initial moisture concentrations, M0, and diffusion coefficients, D. Surface temperature profiles, over time, of moisture bearing specimens are compared with the temperature profiles of dry composite plates. It is evident from the results that M0 and D affect the surface temperature of a moist plate. Surface temperature profiles are shown to decrease with increasing M0 and/or D. In particular, dry and moist specimens are shown to differ in final temperatures by as much as 30°C over a 900 s interval when M0 = 30% and D is on the order of 10–8m2/s (T0 = 25°C, h = 60 W/m2°C, T∞ = 90°C).

Finite element analysis of electric double layer capacitors using a transient nonlinear Nernst-Planck-Poisson (NPP) model and Nernst-Planck-Poisson-modified Stern layer (NPPMS) model are presented in 1D and 2D. The NPP model provided unrealistic ion concentrations for high electrode surface potential. The NPPMS model uses a modified Stern layer to account for finite ion size, resulting in realistic ion concentrations even at high surface potential. The finite element solution algorithm uses the Newton-Raphson method to solve the nonlinear problem and the alpha family approximation for time integration to solve the NPP and NPPMS models for transient cases. Cubic Hermite elements are used for interfacing the modified Stern and diffuse layers in 1D while serendipity elements are used for the same in 2D. Effects of the surface potential and bulk molarity on the electric potential and ion concentrations are studied. The ability of the models to predict energy storage capacity is investigated and the predicted solutions from the 1D NPP and NPPMS models are compared for various cases. It is observed that NPPMS model provided realistic and correct results for low and high values of surface potential. Furthermore, the 1D NPPMS model is extended into 2D. The pore structure on the electrode surface, the electrode surface area and its geometry are important factors in determining the performance of the electric double layer capacitor. Thus 2D models containing a porous electrode are modeled and analyzed for understanding of the behavior of the electric double layer capacitor. The effect of pore radius and pore depth on the predicted electric potential, ion concentrations, surface charge density, surface energy density, and charging time are discussed using the 2D Nernst-Planck-Poissonmodified Stern layer (NPPMS) model.

Extruded products with precision shape have been used widely to 3C products, electronic equipment, communicatory installation, precision instrument, automobile industry. The tolerance for this kind of asymmetric products with small size is strictly required. During extrusion, the plastic flow of the billet inside the die cavity is complicated. The temperature distribution of the billet, the elastic deformation of the die, and the design of the flow guide affect the final dimension of the product. This paper uses the finite element code ¡§DEFORM 3D¡¨ to simulate the plastic flow of the billet inside the die cavity and the stress, strain, temperature distributions of the die during extrusion of a 3C product, Clip and Housing. From the simulation results, a die design guideline is proposed and the temperature, stress, strain distributions are discussed systematically. Furthermore, extrusion experiments are conducted. From the comparisons of the temperature at the die exit, the product sizes and the extrusion force, the validity of the die design rule is verified.

This study involves analyses and experiments of magnesium¡¦s hot extrusion of thin sheets and tubes. At first, hot compression tests are conducted to obtain the magnesium¡¦s plastic flow stresses in high tempearatures, which will be used in the finite element analysis. In the FE simulations of thin sheet extrusion, the flow pattern of the magnesium billet within the die, the temperature history at die exit and the elastic deformation of the die is analyzed. Sound and good thin sheets are obtained by appropriate die design, initial billet temperature and extrusion velocity¡¦s control. The goal of constant temperature extrusion is expected to achieved by controlling the extrusion velocity which will influences the billet temperature at die exit. In FE simulations of thin tube extrusion, the flow pattern of the magnesium billet within the port-holes, welding chamber and die bearing is analyzed. The elastic deformation of the die is dicussed. Extrusion of sound thin tubes is achieved by appropriate extrusion conditions. Finally, hot extrusion experiments are conducted and the experimental values of the extrusion load and dimensions of the products are compared with the analytical values to verify the validity of the analytical models.

ABSTRACT Eddy Current Test (ET) is one of the widely-used method in the nondestructive testing (NDT). It is used to examine thinner sheet metal. According to the theory of electromagnetic induction, the researcher used a coil to make the surface of the metal pipe bring much eddy current. In addition, he investigated the variations of the coil impendence by the interaction between the coil magnetic field and the eddy current magnetic field. By observing the variations of the phase angle and the impendence plane diagram, the researcher also found factors for different defects. The purpose of this study is to research the influence of the diversity of the geometry when examining metal pipe. According to Eddy Current Test, the magnetic field is a major factor in testing. So the researcher generalized a 3-D electromagnetic model with software and analyzed the results of the magnetic field by the finite element method. By drawing the impendence plane diagram, evaluating curves and by observing the variations of the influence by diversity of the geometry, the researcher found the possibility of preventing the inaccuracy and errors in testing with a 3-D electromagnetic model. Later on, he found some influential factors, confirmed the tendency, and then increased the accuracy in examining thin sheet metal.

The purpose of this research is to provide a systematic design of a reciprocating tubular linear generator, which is suitable for harvesting solar thermal energy and ocean wave energy. For the structure design of this generator, the stator utilizes a slotless structure, while the mover utilizes the quasi-Halbach permanent magnet array. The operational magnetic fields are first estimated by magnetic equivalent circuit analysis, and then confirmed by three-dimensional finite element analysis. Also, parameters of the machine structure are optimized by Taguchi¡¦s method. The stator windings are selected iteratively by operational specifications and constraints. Finally, assessments of the machine operational behaviors are performed to achieve a complete and systematic design.

The aim of this thesis was to determine if the size of the femoral head can influ-ence corrosion at the head-neck taper interface of total hip arthroplasty (THA) prosthe-ses. A hypothesis was developed that large head sizes could result in a greater toggling torque at the head-neck taper interface by increasing the distance between the centre of the femoral head to the centre of the neck taper. This could result in increased micromotion and deteriorate the passive oxide film along the head-neck taper interface; thus, making the taper interface vulnerable to corrosion. A retrieval analysis of 74 THA prostheses studied the corrosion damage at the head-neck taper interface. This study revealed that prostheses featuring 36 mm femoral heads had significantly greater head taper corrosion than prostheses with a 28 mm head. Finite element analysis was performed afterwards to identify if the use of large femoral heads can increase the micromotion at the head-neck taper interface due to a greater toggling torque. This experiment demonstrated that with a larger head size the micromotion at the head-neck taper interface increases. An in vitro corrosion fatigue study was performed afterwards following ASTM F1875-98. When applying an off-axis fatigue load, prostheses featuring a 36 mm femoral head displayed significantly more corrosion damage at the head-neck taper interface than those with a 28 mm femoral head. Axial fatigue loading was also applied; negligible corrosion damage at the head-neck taper interface was discovered in comparison to the prostheses that received an out of axis load. This verifies that the use of large femoral heads can result in increased head-neck taper corrosion due to a greater toggling torque.

Nondestructive testing (NDT) plays a more important role today in evaluating structural integrity of civil infrastructure. Impact-echo method (IE) is an effective stress wave based NDT method for locating defects in concrete structures. However, the contact requirement between sensor and concrete surface significantly limits the test speed and wide application of this method to large-scale structures such as bridges. Recent studies show the feasibility of air-coupled sensing, which eliminates the contact requirement and thus accelerates IE test. To further improve the test speed, a fully non-contact IE test using air-coupled sensing and excitation is investigated in this dissertation. This dissertation provides the theoretical basis required for developing an effective air-coupled IE method. For air-coupled sensing, 2D numerical simulations are first conducted to study the wave propagation in the air-solid system during IE tests. Visualized wavefield indicates that parabolic reflectors can effectively enhance the IE signal strength by focusing airborne IE waves to an air-coupled sensor. To maximize signal amplification, an analytical solution for the focused axial pressure response of a parabolic reflector with incident plane waves is derived. This solution is used to determine the reflector geometry that gives the highest focusing gain. For air-coupled excitation, a focused spark source with an ellipsoidal reflector is employed to excite stress waves in concrete. Numerical simulations and available nonlinear computer code (KZKTexas) are employed to investigate the reflector geometry that gives the highest stress wave excitation in solids. An acoustical muffler that works with the focused spark source is proposed to decrease the spark-induced noise level. The effect of source receiver spacing on received IE signals is studied. Simulated wavefield demonstrates that the mode shape of IE surface displacement distribution along the radial direction matches the Bessel function of the first kind (J0). Numerical 3D simulation results show the relation between focused IE signals and source receiver spacings, and indicate the spacing should be minimized to obtain better focused IE signal strength. Air-coupled IE test using through transmission setup is also investigated. / text

Accurate assessment of hip fracture risk is very important to prevent hip fracture and to monitor the effect of a treatment. A subject-specific QCT-based finite element model was constructed to assess hip fracture risk at the critical locations of femur during the single-leg stance and the sideways fall. The aim of this study was to improve the prediction of hip fracture risk by introducing a more proper failure criterion to more accurately describe bone failure mechanism. Hip fracture risk index was defined using the strain energy criterion, which is able to integrally consider information such as stresses, strains and material properties in bone failure. It was found that the femoral neck and the intertrochanteric region have higher fracture risk than other part of the femur, probably owing to the larger content of cancellous bone in these regions. The study results also suggested that women are more prone to hip fracture than men. The effects of different parameters such as age, body height, weight, and BMI on hip fracture risk were also investigated in this study. The findings in this study have a good agreement with those clinical observations reported in the literature. The main contributions from this study include: (1) introducing an algorithm for hip fracture risk assessment at the critical locations of femur using the strain energy criterion and QCT-based finite element modeling, (2) theoretically more reasonable definition of hip fracture risk index based on the strain energy criterion, and (3) a semi-automatic finite element analysis and automatic calculation of hip fracture risk index at the critical locations of femur using in-house developed computer codes. The proposed hip fracture risk index based on the strain energy criterion will be a promising tool for more accurate assessment of hip fracture risk. However, experimental validation should be conducted before its clinical applications. / October 2015

A new experimental method to characterize the mechanical properties of metallic nanowires is introduced. An accurate and fast mechanical characterization of nanowires requires simultaneous imaging and testing of nanowires. However, there exists no practical experimental procedure in the literature that provides a quantitative mechanical analysis and imaging of the nanowire specimens during mechanical testing. In this study, a customized atomic force microscope (AFM) is placed inside a scanning electron microscope (SEM) in order to locate the position of the nanowires. The tip of the atomic force microscope cantilever is utilized to bend and break the nanowires. The nanowires are prepared by electroplating of nickel ions into the nanoscale pores of the alumina membranes. Force versus bending displacement responses of these nanowires are measured experimentally and then compared against those of the finite element analysis and peridynamic simulations to extract their mechanical properties through an inverse approach.The average elastic modulus of nickel nanowires, which are extracted using finite element analysis and peridynamic simulations, varies between 220 GPa and 225 GPa. The elastic modulus of bulk nickel published in the literature is comparable to that of nickel nanowires. This observation agrees well with the previous findings on nanowires stating that the elastic modulus of nanowires with diameters over 100nm is similar to that of bulk counterparts. The average yield stress of nickel nanowires, which are extracted using finite element analysis and peridynamic simulations, is found to be between 3.6 GPa to 4.1 GPa. The average value of yield stress of nickel nanowires with 250nm diameter is significantly higher than that of bulk nickel. Higher yield stress of nickel nanowires observed in this study can be explained by the lower defect density of nickel nanowires when compared to their bulk counterparts.Deviation in the extracted mechanical properties is investigated by analyzing the major sources of uncertainty in the experimental procedure. The effects of the nanowire orientation, the loading position and the nanowire diameter on the mechanical test results are quantified using ANSYS simulations. Among all of these three sources of uncertainty investigated, the nanowire diameter has been found to have the most significant effect on the extracted mechanical properties.