Variation in the shape and position of the internal nasal floor relative to the lower border of the piriform aperture in the genus Homo has been described as having three primary shape configurations: level, sloped, or depressed. The high frequency of depressed nasal floors among Neandertals relative to other fossil and extant groups (>80%) had originally led to the idea that nasal floor depression was related to an overall enlarged nasal capsule - an adaptive feature that would have been under selection among Neandertals living in cold, glacial climates. For a variety of reasons, subsequent research has found little empirical or theoretical support for this adaptive idea. Recent research on extant humans has also demonstrated that nasal floor shape variation, unlike many other midfacial traits, does not arise until well after birth, with nasal floor depression (when it occurs) appearing at the earliest around 3.0 years of age. Furthermore, nasal floor depression was also shown to correspond with a vertically expanded premaxillary region. Thus, it was hypothesized that nasal floor depression might be related to variation in key developmental and morphological aspects of the anterior maxillary dentition. This study metrically quantifies nasal floor topography for the first time in order to more objectively examine patterns of shape variation and to test explicit hypotheses regarding potential causative factors for nasal floor variation. The variables examined include anterior tooth dimensions, dental developmental rate, aspects of midfacial shape, overall facial size, and patterns of premaxillary/post-maxillary integration. It was found that among these, only dental developmental rate was clearly correlated with internal nasal floor shape. This result indicates that aspects of anterior dental development may indeed be a causative factor in the development of nasal floor shape variation. The existing visual discrete coding system for nasal floor topography was also evaluated in light of the new, quantitative data produced by this study as well as a critical comparison of the consistency of nasal floor topography definitions used previously in the literature. While it is suggested that quantitative data are preferable to qualitative data for this trait when possible, limitations in research methods for collecting quantitative data on osteological and fossil collections remain difficult to overcome. Thus a new, two-category presence/absence based system for describing nasal floor shape is proposed.

The analytic component of the thesis approaches major questions in Cultural Studies, Philosophy and Social Theory through an investigation of various forms of creative practice. I approach the question of agency, for instance, through a study of stage actors, who must recite set lines, and yet feel empowered precisely by the opportunity to act through them. Investigation of the author's own work as a poet and novelist serves to cast light upon ideology, ie. how one might use a constrained language and yet feel empowered to speak new things through it. I apply these investigations to Althusser, whose famous essay on the total power of ideological interpellation is permeated with theatrical metaphor. I suggest that Althusser is repressing the creative component of everyday life, something social theory has ever found hard to theorise. I proceed to suggest that the place where such processes are analysed is in the philosophy of science. The work of Charles Saunders Peirce on the experimental method is, my investigation uncovers, surprisingly geared toward the investigation of creativity. In science one has a method for, and an extensive literature on, discovering new phenomena. My thesis is that the experimental method of modern scientists, and the creative method of modern writers, both geared toward the production of things that are at once new and true, is largely the same. I use Peircean semiotics to argue that creative composition is about listening to the languages spoken all round you, and transcribing their objective contours. So as to have effect on others. Which is just like science. And in both instances we are endlessly spoken through at every moment by the myriad languages which interpellate us. Whence creativity (for those who are open to it). My three portfolio pieces are: Cube Root of Book: a series of one hundred and thirty two poems set at intervals along the descending spiral of a Fibonacci number sequence. The 14th Floor, an Hypothesis, an experimental novel, written quite literally as an experiment; i.e. having written the novel, I then wrote up a prac-report detailing what I had learnt about the performance of writing, including the above. Unaustralia, a Study of Heads, an attempt to show the relevance of these findings to Cultural Studies and other related practices. It centres on my new reading of Althusser, and is flanked by mini-ethnographies of creative practice, including the above. The poetry is presented as a major new creative work. The experimental novel/ book of philosophy as a substantial contribution to knowledge.

<p>The face of the Earth is constantly renewed by continental rifts that open and allow ridges to spread oceanic floor. Both types of these linear extensional structures are morphologically and structurally segmented. This thesis aims to provide insights into the interaction of such segments as they propagate and mature. It is based on the results of analogue models of evolving rifts and ridges together with field studies of populations of dilational normal faults in the active rift zone of Iceland. Linkage of initially separate segments along rifts and ridges leads to formation of through-going systems operating on a planetary scale. It is argued here that the processes of segment initiation and growth are effectively scale-independent and essentially the same in wide and narrow modes of extension and for shear and dilational failure. Three distinct types of segment coalescence are recognized; these involve tip-to-tip, one tip-to-sidewall and two tips-to-sidewalls segment linkage. The overall structural pattern, particularly the width of the extending domain and the range of displacements and orientations of smaller-scale internal extensional structures, is influenced by both the geometry of extension and the mechanical properties of the extending material. Types of segment linkage appear to be largely independent of localization of dilation or intensity of magmatic accretion. Instead they are controlled mainly by the relative distribution and orientation of interacting segments. A few orders of segmentation along global rift-ridge systems and arrays of dilational normal faults indicate that linear continuous structures accumulate extension in successive increments during which the segments change their geometries in semi-continuous interaction and coalescence.</p>

The face of the Earth is constantly renewed by continental rifts that open and allow ridges to spread oceanic floor. Both types of these linear extensional structures are morphologically and structurally segmented. This thesis aims to provide insights into the interaction of such segments as they propagate and mature. It is based on the results of analogue models of evolving rifts and ridges together with field studies of populations of dilational normal faults in the active rift zone of Iceland. Linkage of initially separate segments along rifts and ridges leads to formation of through-going systems operating on a planetary scale. It is argued here that the processes of segment initiation and growth are effectively scale-independent and essentially the same in wide and narrow modes of extension and for shear and dilational failure. Three distinct types of segment coalescence are recognized; these involve tip-to-tip, one tip-to-sidewall and two tips-to-sidewalls segment linkage. The overall structural pattern, particularly the width of the extending domain and the range of displacements and orientations of smaller-scale internal extensional structures, is influenced by both the geometry of extension and the mechanical properties of the extending material. Types of segment linkage appear to be largely independent of localization of dilation or intensity of magmatic accretion. Instead they are controlled mainly by the relative distribution and orientation of interacting segments. A few orders of segmentation along global rift-ridge systems and arrays of dilational normal faults indicate that linear continuous structures accumulate extension in successive increments during which the segments change their geometries in semi-continuous interaction and coalescence.

No description available.

The purpose of this Master Thesis is to study how the value stream mapping concept can be applied along the construction supply chain for prefabricated massive timber floor elements. Identification and qualification of waste are starting points to propose suggestions on how to reduce and/or eliminate them. In order to use the value stream mapping along the construction supply chain, pertinent data has been collected and analyzed. To conduct the value stream mapping, the first three steps of the lean thinking principles in construction have been followed. The first step aims at defining the customer and his value as well as the value for the delivery team and how it is specified in the product. The second step is based on identifying the value stream and this is done through defining the resources and activities needed to manufacture, deliver and install the floor elements. This is conducted by using the VSMM methodology. In addition the current practice should be standardized and key component suppliers should be defined and located. The third and last step identifies non-value adding activities, in other words waste and suggestions on how to remove and/or reduce waste have been reached. Wastes from product defects, transportation waste and waste of waiting were to be found in the construction supply chain. Propositions to reduce and/or eliminate wastes were to implement a more careful planning of the manufacturing process and production schedule, to apply lean production principles in the manufacturing facility and decrease and or eliminate storage time. The study made has shown that in the supply chain of massive timber floor elements at Limnologen there is a big potential to lower costs and increase customer value as value added-time accounted for only 2% of the total time.

The current paper presents a study conducted at The National Museum of Science and Technology in Stockholm to investigate the exhibition “Antarctica – that’s cool” from its first concept to the first workshop that is held in the exhibition. The focus is on the influence of floor staff on an exhibition and workshops as learning facilities in museums. Findings, based on visitor observation and the exhibition building process, go into the characteristics of low-budget productions and discuss the importance of staff on the exhibition floor for museums as life-long learning facilities. The holistic approach of the study provides deep insights into the complex interplay of visitors, staff and exhibitions. The results can be used for future exhibition building processes and educational programs in museums and should strengthen the museum’s position as life-long learning facility in nowadays society.

Although increasing stair use among adults with sedentary occupations can provide an accessible means of integrating moderate physical activity within daily work routines, there is little evidence-based information available to guide architects on how to design buildings that promote stair use. This study examined the relationship between stair use and a broad range of features of the physical environment within 10 buildings. Based on a review of the literature, a thematic framework (Appeal, Convenience, Comfort, Legibility and Safety) was developed for identifying the features of buildings that may influence stair use. Three methods of investigation were used to examine the relationship between stair use and variables of the five themes and their constructs. Buildings users were surveyed for their reasons for both single and multi-level route choice. The results indicated that reasons associated with convenience and legibility of route had greater influence on route choice than appeal, comfort or safety. Stair and elevator use were measured in the ten buildings along with variables that operationalized the thematic framework. Regression analysis was utilized to examine the relationship between stair use and the operationalized variables of the thematic framework. The results of regression analysis indicated that stair use was associated with 8 key spatial variables of convenience and legibility (travel distances from stair to nearest entrance and to the elevator; percentage of total building area or total occupant load attributed to each stair; physical accessibility of each stair; area of stair isovist; number of turns from the stair to closest entrance and to the most integrated path). Most local environmental features of stairs such as lighting levels and views were not statistically influential. Multivariate regression analysis indicated that three variables (effective area of each stair, area of stair isovist, and number of turns required between the stair and the most integrated path) explained 53% of stair use. A graphic analysis of the arrangement of the 8 key spatial variables within the ten buildings indicated that buildings with high overall levels of stair use optimized the key spatial variables in respect to the location of stair(s) within the building floor plan.

Required illumination levels in an electronics manufacturing facility were studied in order to provide feedback for architects and engineers. The study was carried out for the production floor of an electronics company in Ankara. The space considered was a Printed Circuit Board Assembly (PCBA) and Surface Mount Device (SMD) production department. The selected area was subdivided into different areas according to required illumination levels for each year. These levels were determined according to the specific work types over the total area according to each individual department. Data compiled by the field survey was analyzed and evaluated for investigating the relation of the potential effectiveness of the lighting systems regarding time, together with illumination levels needed for specific work areas. Changes in the sizes of areas needing various illuminance levels over past years were analyzed. It was found that there had been a decrease in the total required illumination levels.

No description available.