No description available.

No description available.

This research discusses how the design of a tornado forward error correcting channel code (FEC) sends digital data stream profiles to the receiver. The complete design was based on the Tornado channel code, binary phase shift keying (BPSK) modulation on a Gaussian channel (AWGN). The communication link was simulated by using Matlab, which shows the theoretical systems efficiency. Then the data stream was input as data to be simulated communication systems using Matlab. The purpose of this paper is to introduce the audience to a simulation technique that has been successfully used to determine how well a FEC expected to work when transferring digital data streams. The goal is to use this data to show how FEC optimizes a digital data stream to gain a better digital communications systems. The results conclude by making comparisons of different possible styles for the Tornado FEC code.

ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California / Decoding and Turbo Equalization (TEQ) algorithms based on the Sum-Product Algorithm (SPA) are well established for LDPC codes. However there is increasing interest in linear and nonlinear programming (NLP)-based decoders which may offer computational and performance advantages over the SPA. We present NLP decoders and Turbo equalizers based on an Augmented Lagrangian formulation of the decoding problem. The decoders update estimates of both the Lagrange multipliers and transmitted codeword while solving an approximate quadratic programming problem. Simulation results show that the NLP decoder performance is intermediate between the SPA and bit-flipping algorithms. The NLP may thus be attractive in some applications as it eliminates the tanh/atanh computations in the SPA.

ITC/USA 2007 Conference Proceedings / The Forty-Third Annual International Telemetering Conference and Technical Exhibition / October 22-25, 2007 / Riviera Hotel & Convention Center, Las Vegas, Nevada / Since the 1970s PCM/FM has been the dominant modulation scheme used for RF telemetry. However more stringent spectrum availability as well as increasing data rates means that more advanced transmission methods are required to keep pace with industry demands. ARTM Tier-I and Tier-II are examples of how the PCM/FM link can be enhanced. However these techniques require a significant increase in the complexity of the receiver/detector for optimal recovery. This paper focuses on a quantitative approach to improving the rate and quality of data using existing PCM/FM links. In particular ACRA CONTROL and BAE SYSTEMS set themselves the goal of revisiting the pre-modulation filter, diversity combiner and bit-sync. By implementing programmable adaptive hardware, it was possible to explore the various tradeoffs offered by modifying pulse shapes and spectral occupancy, inclusion of forward error correction and smart source selection. This papers looks at the improvements achieved at each phase of the evaluation.

International Telemetering Conference Proceedings / October 30-November 02, 1995 / Riviera Hotel, Las Vegas, Nevada / This paper describes an Engineering Development Model (EDM) for the Standard Interoperable Datalink System (SIDS). This EDM represents an attempt to design and build a programmable system that can be used to test and evaluate various aspects of a modern digital datalink. First, an investigation was started of commercial wireless components and standards that could be used to construct the SIDS datalink. This investigation lead to the construction of an engineering developmental model. This model presently consists of wire wrap and prototype circuits that implement many aspects of a modern digital datalink.

International Telemetering Conference Proceedings / October 21, 2002 / Town & Country Hotel and Conference Center, San Diego, California / It has been shown that a multi-symbol detector can improve the detection efficiency of PCM/FM by 3 dB when compared to traditional methods without any change to the transmitted waveform. Although this is a significant breakthrough, further improvements are possible with the addition of Forward Error Correction (FEC). Systematic redundancy can be added by encoding the source data prior to the modulation process, thereby allowing channel errors to be corrected using a decoding circuit. Better detection efficiency translates into additional link margin that can be used to extend the operating range, support higher data throughput, or significantly improve the quality of the received data. This paper investigates the detection efficiency that can be achieved using a multisymbol detector and turbo product coding. The results show that this combination can improve the detection performance by nearly 9 dB relative to conventional PCM/FM systems. The increase in link margin is gained at the expense of a small increase in bandwidth and the additional complexity of the encoding and decoding circuitry.

This thesis presents a new low complexity erasure decoder for staircase codes in optical interconnects between data centers. We developed a parallel software simulation environment to measure the performance of the erasure decoding techniques at output error rates relevant to an optical link. Low complexity erasure decoding demonstrated a 0.06dB increase in coding gain when compared to bounded distance decoding at an output error rate of 3 × 10⁻¹². Further, a log-linear extrapolation predicts a gain of 0.09dB at 10⁻¹⁵. This performance improvement is achieved without an increase in the maximum number of decoding iteration and keeping power constant. In addition, we found the optimal position within the decoding window to apply erasure decoding to minimize iteration count and output error rates, as well as the erasure threshold that minimizes the iteration count subject to the constrained erasure decoding structure.

ITC/USA 2007 Conference Proceedings / The Forty-Third Annual International Telemetering Conference and Technical Exhibition / October 22-25, 2007 / Riviera Hotel & Convention Center, Las Vegas, Nevada / Next generation satellite communication systems require efficient coding schemes that enable high data rates, require low overhead, and have excellent bit error rate performance. A newly rediscovered class of block codes called Low Density Parity Check (LDPC) codes has the potential to revolutionize forward error correction (FEC) because of the very high coding rates. This paper presents a brief overview of LDPC coding and decoding. An LDPC algorithm developed by Goddard Space Flight Center is discussed, and an overview of an accompanying VHDL development by L-3 Communications Cincinnati Electronics is presented.

International Telemetering Conference Proceedings / October 30-November 02, 1995 / Riviera Hotel, Las Vegas, Nevada / In an effort to determine a more accurate characterization of the multipath fading effects on telemetry signals, the BYU telemetering group is implementing an inexpensive data acquisition system to measure these effects. It is designed to measure important signals in a diversity combining system. The received RF envelope, AGC signal, and the weighting signal for each beam, as well as the IRIG B time stamp will be sampled and stored. This system is based on an 80x86 platform for simplicity, compactness, and ease of use. The design is robust and portable to accommodate measurements in a variety of locations including aircraft, ground, and mobile environments.