ITC/USA 2005 Conference Proceedings / The Forty-First Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2005 / Riviera Hotel & Convention Center, Las Vegas, Nevada / This paper describes a telemetry system developed for the EA-18G Flight Test program. The program requires transmission of a number of data streams, in IRIG-106 Chapter 4 PCM, Chapter 8 Mux-All 1553, Ethernet, and Fibre Channel formats. The initial requested data rate was in excess of 30 Mbits/sec. The telemetry system must operate at a range up to about 120 miles, at several test ranges, and with several different aircraft maneuvering configurations. To achieve these requirements, the Flight Test Instrumentation group at Boeing Integrated Defense Systems in Saint Louis, developed a telemetry system in conjunction with industry partners and test range customers. The system transmits two telemetry streams with a total aggregate rate on the order of 20 Mbits/sec. Each telemetry stream consists of up to four PCM streams, combined in a Teletronics Technology Corporation (TTC) Miniature Adaptable Real-Time Multiplexer Unit (MARM) data combiner. It uses Nova Engineering multi-mode transmitters capable of transmitting PCM-FM or Shaped Offset Quadrature Phase Shift Keying (SOQPSK). The transmitter also provides Turbo-Product Code (TPC) Forward Error Correction (FEC) to enhance range and improve link performance. Data collection units purchased from outside vendors or developed by Saint Louis Flight Test Instrumentation, translate Ethernet and Fibre Channel information into traditional PCM streams. A Boeing Flight Test Instrumentation developed control system provides flexible selection of streams to be combined into each telemetry stream, and functional control of antenna selection and transmitter operation.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / Bit error rate (BER) and bandwidth efficiency of several variations of enhanced Feher patented quadrature phase shift keying (FQPSK) [1] are described. An enhanced FQPSK increases the channel packing density of that of the IRIG 106-00 standardized FQPSK-B by approximately 50% in adjacent channel interference (ACI) environment. As the bandwidth efficiency of FQPSK-B DOUBLES (2×) that of pulse code modulation/Frequency modulation (PCM/FM) [5], the enhanced FQPSK, with a simpler transceiver than FQPSK-B, has a channel packing density of TRIPLE (3×) that of PCM/FM. One of the other enhanced FQPSK prototypes has an end to end system loss of only 0.4 dB at BER=1x10^(-3) and 0.5 dB at BER=1x10^(-4) from ideal linearly amplified QPSK theory. The enhanced FQPSK has a simple architecture, thus is inexpensive and has small size, for ultra high bit rate implementation. With low redundancy forward error correction (FEC) coding which expands the spectrum by approximately 10%, further improvement of about 3-4.5dB E N b o is attained with NLA FQPSK-B and enhanced FQPSK at BER=1x10^(-5) .

Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: The telecommunications link between a LEO satellite and a rural ground station with a non-tracking antenna, has a strongly varying link quality and a short communications window. The satellite acts as a store-and-forward node between ground stations. The TC-SDLP and an FTP protocol form a shallow protocol stack, which excludes unneeded protocol functionality and the resulting overhead. Coding gain, introduced by BCH FEC in the TCSDLP, allows for link quality improvement. The core of this thesis is an improvement of the TC-SDLP to maximise effective payload data throughput, or goodput. This improvement was achieved by creating an optimal segment length selection metric based on the BER. Since the BER is not determinable from within the TC-SDLP, the metric was twice determined; once based on the FER and finally based on time delays. The work includes an extensive background study, which consists of space standardisation, orbital physics, error detection and correction, space datalink protocols, data throughput and culminating in the protocol stack design. The project specific link budget calculation is presented. The optimal segment length policy was mathematically determined. Asimulation model of the TC-SDLP was used as a proof of concept for the effective throughput and give a performance benchmark. Finally a TC-SDLP implementation offers a real world performance demonstration. / AFRIKAANSE OPSOMMING: Die telekommunikasie skakel tussen ’n lae aardomwenteling (LEO) sateliet en ’n plattelandse grondstasie met ’n nie-volg antenna, het ’n skakelkwaliteit wat in ’n groot mate varieer en ’n kort kommunikasievenster. Die sateliet tree op as ’n stoor- en- aanstuur node tussen grondstasies. Die TC-SDLP en ’n leêr oordrag protokol (FTP) vorm ’n vlak protokol stapel, wat onnodige protokol funksionaliteit en die gevolglike opkoste uitsluit. Kode aanwins, wat deur die BCH FEC in die TC-SDLP, aangebring word, verbeter die skakelkwaliteit. Die kern van hierdie tesis is ’n verbetering van die TC-SDLP om sodoende die ware deurvoer van nuttige vragdata te maksimimeer. Hierdie verbetering is bereik deur die skep van ’n optimale segmentlengte-seleksie metode gebaseer of die bit fout tempo (BER). Aangesien die BER nie bepaal kan word vanuit die TC-SDLP nie, is die maatstaf twee keer bepaal; die eerste keer is die bepaling gebaseer op die raamwerk fout tempo (FER) en die finale bepaling op tyd vertragings. Die tesis sluit ’n omvattende agtergrondstudie in, wat bestaan uit ruimte standardisering, wentelbaan fisika, die opspoor en regstel van foute, ruimte inligtingskakel protokol en deurstuur van data wat uitloop op die protokol ontwerp. Daar word aangedui hoe die berekening van die begroting vir die skakel van toepassing op die spesifieke projek, gedoen is. ’n Wiskundige analise van die optimale segmentlengte s ook gedoen. ’n Simulasie model van die TC-SDLP is gebruik as ’n bewys van die konsep vir die ware deurset en gee ’n prestasie maatstaf. Laastens bied die TCSDLP implementering ’n ware wereld prestasie demonstrasie.

Current coherent optical transmission systems focus on single carrier solutions for 400Gb/s serial transmission to support traffic growth in fiber-optics communications, together with a few subcarriers multiplexed solutions for the 1 Tb/s serial data rates and beyond. With the advancement of analog-to-digital converter technologies, high order modulation formats up to 64-QAM with symbol rate up to 72Gbaud have been demonstrated experimentally with Raman amplification. To enable such high serial data rates, it is highly desirable to implement in hardware low complexity digital signal processing schemes and advanced forward error correction coding with powerful error correction capability. In this dissertation, to enable high-speed optical communications, we first proposed an efficient FPGA architecture of high-performance binary and non-binary LDPC engines that can support throughputs of multiple Gb/s, which have low power consumption, providing high net coding gains at a target bit-error rate of 10-15. Further, we implement a generalized LDPC coding based rate adaptive binary LDPC coding scheme and puncturing based rate adaptive non-binary LDPC coding scheme, where large number of parameters can be reconfigured in order to cope with the time-varying optical channel conditions and service requirements. Based on comprehensive analysis on complexity, latency, and power consumption we demonstrate that the proposed efficient implementation represents a feasible solution for the next generation optical communication networks. Additionally, we investigate the FPGA implementation of rate adaptive regular LDPC coding combined with up to six high-order modulation formats and demonstrate high net coding gain performance and demonstrated a bit loading algorithm for irregular LDPC coding. Lastly, we present the real-time implementation of a direct detection OFDM transceiver with multi Giga symbols/s symbol rates in a back-to-back configuration.

Streaming multimedia quality is impacted by two main factors: capacity constraint and packet loss. To match the capacity constraint while preserving real-time playout, media scaling can be used to discard the encoded multimedia content that has the least impact on perceived video quality. To limit the impact of lost packets, repair techniques, e.g. forward error correction (FEC), can be used to repair frames damaged by packet loss. However, adding data to facilitate repair requires further reduction of the original multimedia data, making the decision of how much repair data to use of critical importance. Assuming a limited network capacity and the availability of an estimate of the current packet loss rate along a flow path, selecting the best distribution of FEC packets for video frames with inherent interframe encoding dependencies can be cast as a constraint optimization problem that attempts to optimize the quality of the video stream. This thesis presents an Adjusting Repair and Media scaling with Operations Research (ARMOR) system. An analytical model is derived for streaming video with FEC and media scaling. Given parameters to represent network loss as well as video frame types and sizes, if the number of FEC packets per video frame type and media scaling pattern is specified, the model can estimate the video quality at the receiver side. The model is then used in an operations research algorithm to adjust the FEC strength and media scaling level to yield the best quality under the capacity constraint. Four different combinations of FEC type and media scaling method are studied: Media Independent FEC with Temporal Scaling (MITS), Media Independent FEC with Quality Scaling (MIQS), Media Independent FEC with Temporal and Quality Scaling (MITQS), and Media Dependent FEC with Quality Scaling (MDQS). The analytical experiments show: 1) adjusting FEC always achieves a higher video quality than streaming video without FEC or with a fixed amount of FEC; 2) Quality Scaling usually works better than Temporal Scaling; and 3) Media Dependent FEC (MDFEC) is typically less effective than Media Independent FEC (MIFEC). A user study is presented with results from 74 participants analysis shows that the ARMOR model can accurately estimate users¡¯perceptual quality. Well-designed simulations and a realistic system implementation suggests the ARMOR system can practically improve the quality of streaming video.

ITC/USA 2014 Conference Proceedings / The Fiftieth Annual International Telemetering Conference and Technical Exhibition / October 20-23, 2014 / Town and Country Resort & Convention Center, San Diego, CA / In some flight test scenarios the telemetry link is noise limited at long slant ranges or during signal fade events caused by antenna pattern nulls. In these situations, a mitigation technique such as forward error correction (FEC) can add several decibels to the link margin. The particular FEC code discussed in this paper is a variant of a low-density parity check (LDPC) code and is coupled with SOQPSK modulation in the hardware tested. This paper will briefly cover lab testing of the flight-ready hardware then present flight test results comparing a baseline uncoded telemetry link with a LDPC-coded telemetry link. This is the first known test dedicated to this specific FEC code in a real-world test environment with flight profile tailored to assess the viability of an LDPC-coded telemetry link.

Σε μία εποχή όπου η ψηφιοποίηση δεδομένων έχει αυξηθεί ραγδαία η ανάγκη για τη βέλτιστη μετάδοσή τους είναι απαραίτητη. Από τα πλέον σημαντικά μέρη των προτύπων μετάδοσης είναι η κωδικοποίηση του καναλιού μέσω ειδικών αλγορίθμων ώστε να επιτευχθεί η εύρεση και διόρθωση τυχών λαθών. Οι κώδικες Bose, Chaudhuri και Hocquenghem (BCH) είναι τέτοιου είδους κώδικες που χρησιμοποιούνται ευρέως σε εφαρμογές όπως τα CD, DVD, σκληροί δίσκοι, δίσκοι στερεάς κατάστασης (SSD) και το πρότυπο δορυφορικής μετάδοσης τηλεόρασης υψηλής ανάλυσης (HDTV), DVB-S2. Στην παρούσα διπλωματική εργασία σχεδιάστηκε και υλοποιήθηκε κωδικοποιητής και αποκωδικοποιητής BCH για τις 11 περιπτώσεις κανονικού πλαισίου που προσφέρει το πρότυπο DVB-S2. Κύριος στόχος ήταν η όσο το δυνατόν καλύτερη υλοποίηση με γνώμονα το μέγεθος, με τη χρήση κοινών κυκλωμάτων και για τις 11 περιπτώσεις. Αποτέλεσμα αυτής της βελτιστοποίησης μεγέθους, ήταν κάποιες τεχνικές βελτιστοποίησης της ταχύτητας αποκωδικοποίησης, όπως το shortening, να μη χρησιμοποιηθούν καθώς θα είχαν ως αποτέλεσμα την αύξηση της επιφάνειας μερών του αποκωδικοποιητή κατά περίπου 11 φορές. Καθώς σκοπός της διπλωματικής ήταν η μελέτη της απόδοσης των κωδίκων BCH, μελετήθηκε ο ρυθμός λαθών σε διάφορες τιμές της αναλογίας ενέργειας – θορύβου (Eb / N0 ), αφού πρώτα υλοποιήθηκε σε FPGA. / The amount of digital information is growing rapidly the recent decades, making transmission optimization one of the top priorities in digital information systems. One of the main parts of every transmission standard is channel encoding, with the use of algorithms aimed at finding and correcting errors (Forward Error Correction – FEC). Such codes are Bose, Chaudhuri and Hocquenghem (BCH) code, which are widely used in applications like CDs, DVDs, Hard Drives, Solid State Drives (SSDs) and DVB-S2, a satellite transmission standard mostly used for High Definition Television (HDTV). This thesis sets out to account for the design and implementation of a BCH encoder and decoder for all 11 different code rates proposed by the DVB-S2 standard for normal frames. The design was area optimized in order for all 11 code rate encoders and decoders to work on the same FPGA. This lead to some optimization techniques being unused. Even though the codes are shortened, no shortening algorithms which aim at clock cycle optimization were used. Were they used, would lead parts of the decoder to be almost 11 times larger. The main goal of the thesis is to analyze the performance of the codes, so the error rate was measured under different values of the energy to noise ratio (Eb/ N0 ).

Long Term Evolution (LTE) είναι το όνομα που έδωσε το 3GPP στο πρόγραμμα εξέλιξης των κινητών συστημάτων επικοινωνιών τρίτης γενιάς UMTS, με στόχο την αντιμετώπιση των μελλοντικών απαιτήσεων της αγοράς των κινητών δικτύων. Βασικοί στόχοι του νέου προτύπου LTE αποτελούν η αυξημένη απόδοση, το μικρότερο κόστος υλοποίησης, η μείωση της πολυπλοκότητας λειτουργίας και η παροχή νέων εξελιγμένων υπηρεσιών, κάνοντας χρήση νέων φασμάτων λειτουργίας. Οι προσδοκίες από το LTE είναι ιδιαίτερα υψηλές και βασίζονται στην παροχή υπηρεσιών απαλλαγμένων από τις απώλειες. Συνεπώς, η επιτυχία του LTE θα καθοριστεί από την ικανότητα παροχής κινητών συσκευών και ασύρματης υποδομής που θα ανταποκρίνονται στα πρότυπα του 3GPP και θα είναι ιδιαίτερα ανθεκτικά στις απώλειες της ασύρματης μετάδοσης, ώστε να προσφέρονται βελτιωμένες υπηρεσίες υψηλής απόδοσης. Μία βασική πτυχή των προδιαγραφών του συστήματος LTE είναι η ενίσχυση της υπηρεσίας Multimedia Broadcast/Multicast Services, όπου το ίδιο περιεχόμενο μεταδίδεται σε πολλαπλούς χρήστες που βρίσκονται σε μία συγκεκριμένη περιοχή μετάδοσης της υπηρεσίας. Η υπηρεσία MBMS πρωτοπαρουσιάστηκε σαν ένα νέο χαρακτηριστικό στην έκδοση 6 του 3GPP, ώστε να προσφέρει broadcast και multicast μετάδοση πολυμεσικού περιεχομένου σε κινητούς χρήστες μέσω MBMS ασύρματων φορέων μετάδοσης. Η υπηρεσία MBMS παρέχει δύο διαφορετικές μεθόδους διανομής περιεχομένου, τη μέθοδο download και τη μέθοδο streaming. Για να υποστηρίξει την αποδοτική διανομή MBMS περιεχομένου, το 3GPP συμπεριέλαβε ένα μηχανισμό Forward Error Correction στο επίπεδο εφαρμογών (AL-FEC). Το FEC είναι μία μέθοδος που προσφέρει έλεγχο λαθών κατά τη μετάδοση δεδομένων, η οποία χρησιμοποιείται για να υποστηρίξει ή να αντικαταστήσει άλλες μεθόδους παροχής αξιοπιστίας. Στο FEC, ο αποστολέας εισάγει πλεονάζουσα πληροφορία στη μετάδοση δεδομένων. Αυτή η πληροφορία επιτρέπει στο δέκτη να ανακατασκευάσει τα αρχικά δεδομένα. Τέτοια σχήματα αναπόφευκτα προσθέτουν ένα σταθερό overhead στα μεταδιδόμενα δεδομένα με αποτέλεσμα να είναι υπολογιστικά ακριβά. Παρόλα αυτά στα multicast πρωτόκολλα, η χρήση FEC τεχνικών προσφέρει πολύ ισχυρά κίνητρα. Η κωδικοποίηση μπορεί να εξαλείψει τις ανεξάρτητες απώλειες στους διαφορετικούς δέκτες. Επιπρόσθετα, η δραματική μείωση του ρυθμού απώλειας πακέτων μειώνει κατά ένα μεγάλο μέρος την ανάγκη επαναποστολής των χαμένων πακέτων από τον αποστολέα. Επομένως, οι FEC τεχνικές είναι πολύ εύκολο να εκπληρώσουν έναν πρωταρχικό σκοπό των multicast κινητών υπηρεσιών, που είναι η προσαρμοστικότητα σε εφαρμογές με μεγάλο αριθμό δεκτών. Αυτός είναι ο λόγος που το 3GPP συνιστά τη χρήση του AL-FEC για την υπηρεσία MBMS και πιο συγκεκριμένα, υιοθετεί τη χρήση των συστηματικών κωδίκων Raptor. Λαμβάνοντας υπόψιν τα παραπάνω, στόχος της παρούσας μεταπτυχιακής διπλωματικής εργασίας είναι η μελέτη της απόδοσης του AL-FEC πάνω σε υπηρεσίες MBMS, εστιάζοντας στην υπηρεσία της streaming μεθόδου παράδοσης δεδομένων. Προς αυτή την κατεύθυνση, στην παρούσα εργασία μελετάμε την εφαρμογή του μηχανισμού AL-FEC πάνω σε multicast streaming υπηρεσίες των LTE, διερευνώντας πως το ποσό της πλεονάζουσας πληροφορίας ποικίλλει σε πολλαπλούς χρήστες χρησιμοποιώντας ρεαλιστικά περιβάλλοντα προσομοίωσης. Επίσης, εξετάζουμε την απόδοση του AL-FEC για διάφορες διατάξεις του δικτύου ασύρματης πρόσβασης, διάφορα μοντέλα κινητικότητας των χρηστών καθώς και διάφορες παραμέτρους της FEC κωδικοποίησης. / Long Term Evolution (LTE) is the name given to a project within the Third Generation Partnership Project (3GPP) to improve the UMTS 3G mobile system standard to cope with future requirements. Goals include improving efficiency, lowering cost, reducing complexity and improving services, making use of new spectrum opportunities. Expectations are high for LTE and are based on the premise of fault-free performance. Therefore, LTE’s initial success will be determined by the ability of handset and radio infrastructure manufacturers to deliver products that conform to 3GPP standards and are robust enough to allow operators to introduce improved services. A key aspect of LTE specifications is the enhancement of Multimedia Broadcast/Multicast Services (MBMS), where the same content is transmitted to multiple users located in a specific service area. MBMS was firstly standardized as a new feature in 3GPP Release 6, in order to broadcast and multicast multimedia content to mobile terminals via MBMS radio bearer. The MBMS provides two different delivery methods, the download delivery and the streaming delivery method. To support efficient download and streaming delivery, 3GPP has included Application Layer Forward Error Correction (AL-FEC) in the MBMS standard. FEC is a method for error control for data transmission that is used to augment or replace other reliability methods. In FEC, the sender introduces redundant information in the data transmitted. This information allows the receiver to reconstruct the source data. Such schemes inevitably add a constant overhead in the transmitted data and are computationally expensive. In multicast protocols however, the use of FEC techniques has very strong motivations. The encoding eliminates the effect of independent losses at different receivers. This makes these schemes able to scale irrespectively of the actual loss pattern at each receiver. Additionally, the dramatic reduction in the packet loss rate largely reduces the need for retransmission of lost data from the sender. FEC schemes are therefore so simple as to meet a prime objective for mobile multicast services, which is scalability to applications with thousands of receivers. This is the reason why 3GPP recommends the use of AL-FEC for MBMS and, more specifically, adopts the use of systematic Raptor code. After taking into account the above analysis, objective of this master thesis is the study of AL-FEC in MBMS, focusing on the streaming delivery method. To this direction, in this work we study the application of AL-FEC for the streaming delivery method over LTE networks. We investigate how the amount of FEC overhead varies at multiple receivers using realistic simulation scenarios and we investigate the performance of AL-FEC overhead considering different cell deployments, user mobility models and FEC encoding parameters.

Tato diplomová práce se věnuje problematice VLSI návrhu a implementaci vrstvy RS-FEC pro 400 Gb/s Ethernet do FPGA Intel® Stratix® 10 DX 2100. V práci je charakterizován současný stav rychlostí Ethernetu, význam a kontext samoopravných kódů v rámci protokolu Ethernet. Dále je popsána výroba PLD čipů i matematická podstata RS sa moopravných kódů. V části praktické je představen návrh řešení systému RS-FEC, který byl realizován genericky pomocí jazyka VHDL. Zároveň byly jeho komponenty implementovány a v závěrečné diskusi je popsáno jeho řešení, dosažené výsledky včetně jeho budoucího rozšíření.

This thesis examines the benefits of using adaptive modulation and coding in terms of spectral efficiency and probability of bit error. Specifically, we examine the performance enhancement made possible by using linear prediction along with channel estimation in conjunction with adaptive modulation. We begin this manuscript with basic fundamentals of our study, followed by a detailed view of simulations, their results, and our conclusions from them. The study includes simulations in slow and moderately fast flat fading Rayleigh channels. We present our findings regarding the advantages of using predictive measures to foresee the state of the channel and make adjustments to transmissions accordingly. In addition to finding the general advantages of channel prediction in adaptive modulation, we explore various ways to adjust the prediction algorithm when we are faced with high Doppler rates and fast fading. By the end of this work, we should have a better understanding of when channel prediction is most valuable to adaptive modulation and when it is weakest, and how we can alleviate the problems that prediction will have in harsh environments. / Master of Science