Spelling suggestions: "subject:"full duplex"" "subject:"full puplex""
11 |
Full-duplex Wireless: Design, Implementation and CharacterizationJanuary 2012 (has links)
One of the fundamental assumptions made in the design of wireless networks is that the wireless devices have to be half-duplex, i.e., they cannot simultaneously transmit and receive in the same frequency band. The key deterrent in implementing a full-duplex wireless device, which can simultaneously transmit and receive in the same frequency band, is the large power differential between the self-interference from a device's own transmissions and the signal of interest coming from a distant source. In this thesis, we revisit this basic assumption and propose a full-duplex radio design. The design suppresses the self-interference signal by employing a combination of passive suppression, and active analog and digital cancellation mechanisms. The active cancellations are designed for wideband, multiple subcarrier (OFDM), and multiple antenna (MIMO) wireless communications systems. We then implement our design as a 20 MHz MIMO OFDM system with a 2.4 GHz center frequency, suitable for Wi-Fi systems. We perform extensive over-the-air tests to characterize our implementation. Our main contributions are the following: (a) the average amount of active cancellation increases as the received self-interference power increases and as a result, the rate of a full-duplex link increases as the transmit power of communicating devices increases, (b) applying digital cancellation after analog cancellation can sometimes increase the self-interference and the effectiveness of digital cancellation in a full-duplex system will depend on the performance of the cancellation stages that precede it, (c) our full-duplex device design achieves an average of 85 dB of self-interference cancellation over a 20 MHz bandwidth at 2.4 GHz, which is the best cancellation performance reported to date, (d) our full-duplex device design achieves 30-84% higher ergodic rates than its half-duplex counterpart for received powers in the range of [-75, -60] dBm. As a result, our design is the first one to achieve Wi-Fi ranges; in comparison, no implementation to date has achieved Wi-Fi ranges. Consequently, we have conclusively demonstrated that Wi-Fi full-duplex is practically feasible and hence shown that one of the commonly made assumptions in wireless networks is not fundamental.
|
12 |
Distributed Full-duplex via Wireless Side Channels: Bounds and ProtocolsBai, Jingwen 16 September 2013 (has links)
In this thesis, we study a three-node full-duplex network, where the infrastructure node has simultaneous up- and downlink communication in the same frequency band with two half-duplex nodes. In addition to self-interference at the full-duplex infrastructure node, the three-node network has to contend with the inter-node interference between the two half-duplex nodes. The two forms of interferences differ in one important aspect that the self-interference is known at the interfered receiver. Therefore, we propose to leverage a wireless side-channel to manage the inter-node interference. We characterize the impact of inter-node interference on the network achievable rate region with and without a side-channel between the nodes. We present four distributed full-duplex inter-node interference cancellation schemes, which leverage the device-to-device wireless side-channel for improved interference cancellation.
Of the four, bin-and-cancel is asymptotically optimal in high signal-to-noise ratio limit which uses Han-Kobayashi common-private message splitting and achieves within 1 bits/s/Hz of the capacity region for all values of channel parameters. The other three schemes are simpler compared to bin-and-cancel but achieve the near-optimal performance only in certain regimes of channel values. Asymptotic multiplexing gains of all proposed schemes are derived to show analytically that leveraging the side channel can be highly beneficial in increasing the multiplexing gain of the system exactly in those regimes where inter-node interference has the highest impact.
|
13 |
Performance analysis of spectrum sensing techniques for future wireless networksHe, Yibo January 2017 (has links)
In this thesis, spectrum sensing techniques are investigated for cognitive radio (CR) networks in order to improve the sensing and transmission performance of secondary networks. Specifically, the detailed exploration comprises of three areas, including single-node spectrum sensing based on eigenvalue-based detection, cooperative spectrum sensing under random secondary networks and full-duplex (FD) spectrum sensing and sharing techniques. In the first technical chapter of this thesis, eigenvalue-based spectrum sensing techniques, including maximum eigenvalue detection (MED), maximum minimum eigenvalue (MME) detection, energy with minimum eigenvalue (EME) detection and the generalized likelihood ratio test (GLRT) eigenvalue detector, are investigated in terms of total error rates and achievable throughput. Firstly, in order to consider the benefits of primary users (PUs) and secondary users (SUs) simultaneously, the optimal decision thresholds are investigated to minimize the total error rate, i.e. the summation of missed detection and false alarm rate. Secondly, the sensing-throughput trade-off is studied based on the GLRT detector and the optimal sensing time is obtained for maximizing the achievable throughput of secondary communications when the target probability of detection is achieved. In the second technical chapter, the centralized GLRT-based cooperative sensing technique is evaluated by utilizing a homogeneous Poisson point process (PPP). Firstly, since collaborating all the available SUs does not always achieve the best sensing performance under a random secondary network, the optimal number of cooperating SUs is investigated to minimize the total error rate of the final decision. Secondly, the achievable ergodic capacity and throughput of SUs are studied and the technique of determining an appropriate number of cooperating SUs is proposed to optimize the secondary transmission performance based on a target total error rate requirement. In the last technical chapter, FD spectrum sensing (FDSS) and sensing-based spectrum sharing (FD-SBSS) are investigated. There exists a threshold pair, not a single threshold, due to the self-interference caused by the simultaneous sensing and transmission. Firstly, by utilizing the derived expressions of false alarm and detection rates, the optimal decision threshold pair is obtained to minimize total error rate for the FDSS scheme. Secondly, in order to further improve the secondary transmission performance, the FD-SBSS scheme is proposed and the collision and spectrum waste probabilities are studied. Furthermore, different antenna partitioning methods are proposed to maximize the achievable throughput of SUs under both FDSS and FD-SBSS schemes.
|
14 |
Adaptive Baseband Interference Cancellation for Full Duplex Wireless CommunicationJanuary 2016 (has links)
abstract: Traditional wireless communication systems operate in duplexed modes i.e. using time division duplexing or frequency division duplexing. These methods can respectively emulate full duplex mode operation or realize full duplex mode operation with decreased spectral efficiency. This thesis presents a novel method of achieving full duplex operation by actively cancelling out the transmitted signal in pseudo-real time. With appropriate hardware, the algorithms and techniques used in this work can be implemented in real time without any knowledge of the channel or any training sequence. Convergence times of down to 1 ms can be achieved which is adequate for the coherence bandwidths associated with an indoor environment. By utilizing adaptive cancellation, additional overhead for re-calibrating the system in other open-loop methods is not needed. / Dissertation/Thesis / Masters Thesis Electrical Engineering 2016
|
15 |
Full Duplex CMOS Transceiver with On-Chip Self-Interference CancelationJanuary 2017 (has links)
abstract: The demand for the higher data rate in the wireless telecommunication is increasing rapidly. Providing higher data rate in cellular telecommunication systems is limited because of the limited physical resources such as telecommunication frequency channels. Besides, interference with the other users and self-interference signal in the receiver are the other challenges in increasing the bandwidth of the wireless telecommunication system.
Full duplex wireless communication transmits and receives at the same time and the same frequency which was assumed impossible in the conventional wireless communication systems. Full duplex wireless communication, compared to the conventional wireless communication, doubles the channel efficiency and bandwidth. In addition, full duplex wireless communication system simplifies the reusing of the radio resources in small cells to eliminate the backhaul problem and simplifies the management of the spectrum. Finally, the full duplex telecommunication system reduces the costs of future wireless communication systems.
The main challenge in the full duplex wireless is the self-interference signal at the receiver which is very large compared to the receiver noise floor and it degrades the receiver performance significantly. In this dissertation, different techniques for the antenna interface and self-interference cancellation are proposed for the wireless full duplex transceiver. These techniques are designed and implemented on CMOS technology. The measurement results show that the full duplex wireless is possible for the short range and cellular wireless communication systems. / Dissertation/Thesis / Doctoral Dissertation Engineering 2017
|
16 |
Learning-Based Multi-Channel Spectrum Access in Full-duplex Cognitive Radio Networks with Unknown Primary User ActivitiesHammouda, Mohamed January 2017 (has links)
Cognitive radio had been proposed as a methodology for overcoming the inefficiency of the conventional static allocation of the available spectrum in wireless communication networks. The majority of opportunistic spectrum access schemes in cognitive radio networks (CRNs) rely on the Listen-Before-Talk (LBT) model due to the half-duplex nature of conventional wireless radios. However, LBT su ers from the problem of high collision rates and low secondary user throughput if time is misaligned among the secondary users (SUs) and the primary users (PUs). This problem can be mitigated by leveraging full-duplex (FD) communications that facilitate concurrent sensing and transmission. This thesis considers the problem of optimal opportunistic multi-channel spectrum sensing and access using FD radios in the presence of uncertain primary user (PU) activity statistics. A joint learningand spectrum access scheme is proposed. To optimize its throughput, the SU sensing period has to be carefully tuned. However, in absence of exact knowledge of the PU activity statistics, the PU's performance may be adversely a ected. To address this problem, a robust optimization problem is formulated. Analysis shows that under some non-restrictive simplifying assumptions, the robust optimization problem is convex. The impact of sensing periods on the PU collision probability and the SU throughput are analyzed, and the optimal sensing period is found via convex optimization. An "\epsilon-greedy algorithm is proposed for use by the SU to learn the PUs' activity statistics in multichannel networks. It is shown that sublinear regrets can be attained by the proposed estimation and robust optimization strategy. Simulation studies demonstrate that the resulting robust solution achieves a good trade-o between optimizing the SU's throughput and protecting the PU. / Thesis / Master of Applied Science (MASc)
|
17 |
Contribution à l'estimation des canaux relatifs aux signaux utile et interférent dans un système full-duplex dédié aux communications véhiculaires / Signal of interest and self interference channel estimate in a full-duplex system for vehicular communicationsBouallegue, Sélima 28 March 2019 (has links)
Dans ces travaux de thèse, nous proposons de nouvelles méthodes d’estimation de canal pour un système full-duplex dédié aux communications véhiculaires. Les deux canaux relatifs au signal utile (SOI) et au signal interférant (SI) sont estimés. Les méthodes que nous proposons sont classées selon si les pilotes des deux signaux sont envoyés séparément ou simultanément. Dans le cas de la transmission séparée des pilotes, nous proposons un algorithme se basant sur un positionnement dynamique des pilotes ainsi qu’une méthode hybride qui combine l’approche du changement de position des pilotes avec l’emploi des séquences d’apprentissage en début de trame. Nous proposons également une méthode visant à optimiser l’estimation classique qui se base sur un séquence d’apprentissage en amélioration l’estimation au niveau de chaque symbole préambule. Dans le contexte d’une transmission simultanée des pilotes, nous proposons deux algorithmes visant à améliorer les performances d’estimation par rapport aux méthodes existantes. Dans la première méthode proposée, les deux canaux SI et SOI sont estimés dans le domaine fréquentiel à l’aide des itérations de Landweber. La seconde proposition consiste à utiliser une matrice de projectionafin d’éviter le bruit engendré par les données inconnues du signal SOI lors de l’estimation. Finalement, nous proposons une méthode d’estimation de canal sélectif en temps et en fréquence pour des fréquences doppler faibles à modérées. Certaines méthodes proposées sont implémentées dans un système full-duplex expérimental qui a recours aux antennes reconfigurables pour réaliser l’annulation passive. / In this work of thesis, we propose new channel estimation approaches for a full-duplex system dédicated to vehicular communications. Both the self-interference (SI) and intended (SOI) channel are estimated. We propose different estimation méthods according to whether the pilots of the signals are transmitted jointly or separately. In the separate transmission, an estimation based on a new pilot configuration is proposed as well as a hybrid method which use both pilot configuration and training sequences.We also propose an optimisation of the conventional training-based method.It consists of improving the estimation of each training symbole. In the joint transmission, we propose two algorithms that aims to improve the estimation performances compared to the existing methods. In the first proposed method, the two channels are first estimated in the frequency domain using the Landweber iterations. The second proposition consists of using a projection matrix to manipulate only the pilots and avoid the noise that is caused by the SOI unknown datas. Finally, we propose a time and frequency-selective channel estimation for low and medium doppler frequency. Some of the proposed estimators are implemented on a real Full Duplex communication system which use Multi-reconfigurable antennas to perform the passive cancellation.
|
18 |
Full Duplex Relay ClustersChen, Lu 10 October 2019 (has links)
No description available.
|
19 |
IMPACT OF NOISES AND NONLINEARITY ON ANALOG SELF-INTERFERENCE CANCELLATION IN IN-BAND FULL-DUPLEX COMMUNICATIONSJonathan M Shilling (11813957) 18 December 2021 (has links)
<p>A wireless revolution has occurred resulting in the formation of a proverbial backbone of wireless devices that our everyday functionality, productivity, and general way of life have become dependent. Consequently, victimizing an already constrained and finite wireless spectrum with further demands for increased bandwidths, greater channel capacities, and an insatiable plea for faster access rates. In-band full-duplexing (IBFD) is an innovative and encouraging technology that aims to answer this tacit mitigation call by bolstering spectral efficiency through simultaneous same frequency band transmission and reception. Conventionally, transceiver-based systems have their respective transmission and reception dictated by occurring in either disparate time slots (half-duplex) or distinct frequencies (out-of-band full-duplex). By achieving simultaneous same band communication, a theoretical doubling in spectral efficiency is rendered feasible. However, transmitter to receiver leakage, or self-interference (SI), remains the most barring frustration to IBFD realization. Being locally generated, SI is considerably stronger (often 50-100dB) than the desired signal-of-interest (SOI). Left unresolved, this unwanted energy saturates the receiver’s amplifiers and desensitizes its analog-to-digital converters. Thus, rendering the SOI unintelligible. Therefore, a means of self-interference cancellation (SIC) is necessitated to suppress any polluting SI to levels that of or below the receiver’s noise floor.</p><p></p>In this thesis an in-depth history of in-band full duplex technology is first presented, followed by a condensed examination of the SIC domains. Pertinent theory is presented pertaining to noise analysis and estimation relevant to a proposed IBFD transceiver architecture. Finally, a modelled simulation of this transceiver, developed in MATLAB, is presented. Subsequent results detailing an investigative study done on a fully adaptive tapped-branch analog self-interference canceller are shown. Said canceller’s variable phase and amplitude weights are set via real-time training using gradient descent algorithms. Evaluation of the results reveal marginal effect on the SIC efficacy due to transmission path nonlinearity and noise distortions alone. However, expansion of model consideration for conceivable cancellation hardware nonlinearities reveals an indirectly proportional degradation of SIC performance by up to 35dB as distortion levels vary from -80 dBm to -10 dBm. These results indicate consideration of such non-idealities should be an integral part of cancellation hardware design for the preclusion of any intrinsic cancellation impediments.
|
20 |
DATA COMMUNICATIONS OVER AIRCRAFT POWER LINESTian, Hai, Trojak, Tom, Jones, Charles 10 1900 (has links)
ITC/USA 2005 Conference Proceedings / The Forty-First Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2005 / Riviera Hotel & Convention Center, Las Vegas, Nevada / This paper introduces a study of the feasibility and initial hardware design for transmitting data over aircraft power lines. The intent of this design is to significantly reduce the wiring in the aircraft instrumentation system. The potential usages of this technology include Common Airborne Instrumentation System (CAIS) or clock distribution. Aircraft power lines channel characteristics are presented and Orthogonal Frequency Division Multiplexing (OFDM) is introduced as an attractive modulation scheme for high-speed power line transmission. A design of a full-duplex transceiver with accurate frequency planning is then discussed. A general discussion of what communications protocols are appropriate for this technology is also provided.
|
Page generated in 0.0648 seconds