Numerous scenarios exist whereby radioactive particulates are transported between spatially separated points of interest. An example of this phenomenon is, in the aftermath of a Radiological Dispersal Device (RDD) detonation, the resuspension of radioactive particulates from the resultant fallout field. Quantifying the spatial distribution of radioactive particulates allow for the calculation of potential radiation doses that can be incurred from exposure to such particulates. Presently, there are no simulation techniques that link radioactive particulate transport with subsequent radiation field determination and so this thesis develops a coupled Computational Fluid Dynamics (CFD) and Monte Carlo (MC) Radiation Transport approach to this problem. Via particulate injections, the CFD simulation defines the spatial distribution of radioactive particulates and this distribution is then employed by the MC Radiation Transport simulation to characterize the resultant radiation field. GAMBIT/FLUENT are employed for the CFD simulations while MCNPX is used for the MC Radiation Transport simulations. / UOIT

<p>The overall aim of this project is to study the heat transfer inside the reaction chamber of the Hot-Wire Chemical Vapor Deposition (HWCVD) system with a commercial software package FLUENT6.3 / it is one of the most popular Computational Fluid Dynamics solvers for complex flows ranging from incompressible to mildly compressible to even highly compressible flows. The wealth of physical models in FLUENT allows us to accurately predict laminar and turbulent flows, various modes of heat transfer, chemical reactions, multiphase flows and other phenomena with complete mesh flexibility and solution-based mesh adaptation. In this study the 3-D HWCVD geometry was measured and created in GAMBIT which then generates a mesh model of the reaction chamber for the calculation in FLUENT. The gas flow in this study was characterized as the steady and incompressible fluid flow due to the small Mach number and assumptions made to simplify the complexity of the physical geometry. This thesis illustrates the setups and solutions of the 3-D geometry and the chemically reacting laminar and turbulent gas flow, wall surface reaction and heat transfer in the HWCVD deposition chamber.</p>

Magister Scientiae - MSc / The overall aim of this project is to study the heat transfer inside the reaction chamber of the Hot-Wire Chemical Vapor Deposition (HWCVD) system with a commercial software package FLUENT6.3; it is one of the most popular Computational Fluid Dynamics solvers for complex flows ranging from incompressible to mildly compressible to even highly compressible flows. The wealth of physical models in FLUENT allows us to accurately predict laminar and turbulent flows, various modes of heat transfer, chemical reactions, multiphase flows and other phenomena with complete mesh flexibility and solution-based mesh adaptation. In this study the 3-D HWCVD geometry was measured and created in GAMBIT which then generates a mesh model of the reaction chamber for the calculation in FLUENT. The gas flow in this study was characterized as the steady and incompressible fluid flow due to the small Mach number and assumptions made to simplify the complexity of the physical geometry. This thesis illustrates the setups and solutions of the 3-D geometry and the chemically reacting laminar and turbulent gas flow, wall surface reaction and heat transfer in the HWCVD deposition chamber. / South Africa

The aim of the thesis was to propose a pump impeller with higher effectiveness and verify the proposal with the calculation using programs Gambit and Fluent. Three designed impellers were afterwards made using 3D printer and its characteristics were measured in a hydraulic laboratory in Kaplan Department of hydraulic machines. The proposal of a so called wideband impeller of the centrifugal pump was made with chaotic ordering of blade cascades, in one impeller occur blades with various input and output angles and different shapes of blades but all blades have got similar shape in a meridian sectional view of impeller. The thesis was divided into three parts. In the first part, a conforming transformation was theoretically described which was in the thesis used for the shape proposal of impeller blades. In the second part of the thesis final proposals and calculations of pump impellers were made. The third part of the thesis focused on the processing and evaluation of experimental measurement in the hydraulic laboratory and finally the results of the thesis were summarized in the conclusion.

The Master´s Thesis is dwelling on air flowing in kitchen space of a family house. The work points at the comparison and the evaluation of the results, which were obtained from an experiment in a real object and a simulation in right software.

This study investigates Game theory including economic theories related to agricultural production. Model creation simulating economical system is built upon theoretic starting points. Commodity production is simulated using game theory with searching for Nash equilibria. Commodity demand function is grounded on concept of Cournot game. System includes land trading based on sealed-bid auctions with second-price. This model is using external Gambit software which is freeware library for game theory computations. Model evaluation is located in Experiments section where model structure and truthfulness is tested.

No description available.

<p>This project is a preliminary study in order to build a small power plant, located beside to Gavleån River. It has been designed with the aim of cooling a district of Gävle city, Sweden. That big project is carried out by the international consulting engineering company SWECO. The mentioned plant contains a thermodynamic cycle that takes water from the river and afterwards, it is returned back warmer. It will attempt to study the temperature raise downstream along the river due to the spill of hot water. In addition, it will try to quantify and weight which may be the importance of the increment of temperature compared to the entire river. This work could be vital for an environmental impact study. The thermo and fluid dynamic problem is going to be solved using typical procedure for numerical simulations. To do this, it will be used Computer Aided Design (CAD) to model Gavleån River path and Computational Fluent Dynamics (CFD) to predict the distribution of temperatures. Finally the results of the simulations will be analyzed and discussed to draw conclusions about the final temperature raise in Gavleån River.</p>

This project is a preliminary study in order to build a small power plant, located beside to Gavleån River. It has been designed with the aim of cooling a district of Gävle city, Sweden. That big project is carried out by the international consulting engineering company SWECO. The mentioned plant contains a thermodynamic cycle that takes water from the river and afterwards, it is returned back warmer. It will attempt to study the temperature raise downstream along the river due to the spill of hot water. In addition, it will try to quantify and weight which may be the importance of the increment of temperature compared to the entire river. This work could be vital for an environmental impact study. The thermo and fluid dynamic problem is going to be solved using typical procedure for numerical simulations. To do this, it will be used Computer Aided Design (CAD) to model Gavleån River path and Computational Fluent Dynamics (CFD) to predict the distribution of temperatures. Finally the results of the simulations will be analyzed and discussed to draw conclusions about the final temperature raise in Gavleån River.

Οι καρδιαγγειακές παθήσεις αποτελούν την κύρια αιτία θανάτου στις αναπτυγμένες χώρες. Η στένωση σε μία αρτηρία, είτε αυτή προκαλείται από μία πάθηση όπως το ανεύρυσμα, είτε προκαλείται από μία περίδεση, όπως στις περιπτώσεις των συγγενών καρδιοπαθειών, μπορεί να μεταβάλλει σε σημαντικό βαθμό τα χαρακτηριστικά της ροής του αίματος. Η μελέτη της φυσιολογικής παλλόμενης ροής μέσα από στένωση είναι ιδιαίτερα σημαντική για τη διάγνωση και αντιμετώπιση των αγγειακών νόσων. Το ιατρικό πρόβλημα το οποίο εξετάζουμε στην παρούσα εργασία, είναι η στένωση της πνευμονικής αρτηρίας από περίδεση. Η περίδεση γίνεται προφανώς για να μειωθεί η υψηλή αρτηριακή πίεση και τελικά η ροή του αίματος προς τους πνεύμονες. Πρόκειται για μία χειρουργική μέθοδο αντιμετώπισης συγγενών καρδιοπαθειών. Η περίδεση της πνευμονικής αρτηρίας (pulmonary artery banding - PAB) είτε με συμβατικό τρόπο, ή με την πλέον σύγχρονη μέθοδο μέσω της συσκευής FloWatchTM προκαλεί τη στένωσή της. Με τον συμβατικό τρόπο η στένωση μπορεί να θεωρηθεί αξονικά συμμετρική, ωστόσο με τη χρήση του FloWatchTM είναι μη αξονικά συμμετρική. Έχει αποδειχθεί ότι τόσο η αξονικά συμμετρική, όσο και η μη συμμετρική περίδεση δημιουργεί διαφόρου βαθμού ίνωση του τοιχώματος της πνευμονικής αρτηρίας. Η αναδόμηση της πνευμονικής αρτηρίας είναι πολύ ηπιότερη στην περίπτωση της περίδεσης με το FloWatchTM. Η διαφοροποίηση αυτή έγκειται κυρίως στο ότι η συμβατική περίδεση προκαλεί για συγκεκριμένη μείωση της διατομής ισχυρότερη μείωση της περιμέτρου της διατομής από εκείνης της περίδεσης με το FloWatchTM. Στην παρούσα εργασία γίνεται αναφορά και ανάλυση των διαφόρων περιπτώσεων ροής σε στενώσεις αρτηριών, των συγγενών καρδιοπαθειών και των τεχνικών περίδεσης της πνευμονικής αρτηρίας. Επιπρόσθετα, μελετήθηκαν και υπολογίστηκαν η μόνιμη και η παλλόμενη ροή σε αξονικά συμμετρική 25% στένωση προκαλούμενη από συμβατική περίδεση, καθώς και η μόνιμη και παλλόμενη ροή σε μη συμμετρική 25% στένωση της πνευμονικής αρτηρίας όπως προκαλείται από το FloWatchTM, μέσω των πακέτων Fluent και Gambit. Η υπολογιστική μελέτη του πεδίου ροής περιλαμβάνει την κατανομή ταχυτήτων, τον προσδιορισμό των περιοχών ανακυκλοφορίας, την κατανομή των πιέσεων και την σύγκριση των παραπάνω μεγεθών με τα αντίστοιχα αποτελέσματα της βιβλιογραφίας. Τέλος, με βάση τα αποτελέσματα γίνεται η σύγκριση των δύο μελετούμενων μεθόδων περίδεσης. Αριθμητικά ρεαλιστικά δεδομένα ελήφθησαν από την καρδιοχειρουργική κλινική του νοσοκομείου Παίδων «Αγία Σοφία». / Cardiovascular diseases are the leading cause of death in developed countries. A stenosis in an artery , caused either by a disease such as an aneurism or by a banding (such as in congenital diseases) can change the characteristics of the blood flow very seriously. The study of the physiological pulsatile flow through a stenosis is very important for the diagnosis and treatment of the arterial diseases. The medical problem which is examined in this study is pulmonary artery stenosis caused by a banding. The banding takes place to reduce the high arterial pressure and finally the blood flow from the heart to the lungs. It is a surgical method used for treatment of congenital heart diseases. The pulmonary artery banding either with the use of the conventional method or the most modern with the use of the FloWatchTM technology causes stenosis of the artery. With the conventional method, stenosis can be considered axially symmetrical while with the use of FloWatchTM it is asymmetrical. It has been proven that both the axially symmetrical and asymmetrical banding cause fibrosis of the pulmonary artery walls of different degrees. The reconstruction of the pulmonary artery is milder where there is banding with FloWatchTM. This differentiation is based mainly on the fact that the conventional banding causes, for a specific decrease of the cross-section, a decrease in the perimeter of the cross-section higher than that of banding with FloWatchTM. In this assignment there is a report of different cases of flow in arterial stenosis, in congenital heart diseases and pulmonary banding techniques. In addition what was studied and appreciated was the steady and pulsatile flow in axially symmetrical 25% stenosis caused by the conventional banding, as well as the steady and pulsatile flow in asymmetrical 25% stenosis of pulmonary artery caused by FloWatchTM with the use of Fluent and Gambit. The numerical study of flow distribution includes velocity distribution, designation of back flow area, distribution of pressure and comparison of these quantities with the results in bibliography. Finally, based on the results, there is a comparison of the two banding methods under study. The numerical realistic data were received from the cardio-surgical clinic of children’s hospital “Aghia Sophia”.