Hypersonic aerospace vehicles are severely limited by the lack of adequate high temperature materials that can withstand the harsh hypersonic environment. Tantalum carbide (TaC), with a melting point of 3880°C, is an ultrahigh temperature ceramic (UHTC) with potential applications such as scramjet engines, leading edges, and zero erosion nozzles. However, consolidation of TaC to a dense structure and its low fracture toughness are major challenges that make it currently unviable for hypersonic applications. In this study, Graphene NanoPlatelets (GNP) reinforced TaC composites are synthesized by spark plasma sintering (SPS) at extreme conditions of 1850˚C and 80-100 MPa. The addition of GNP improves densification and enhances fracture toughness of TaC by up to ~100% through mechanisms such as GNP bending, sliding, pull-out, grain wrapping, crack bridging, and crack deflection. Also, TaC-GNP composites display improved oxidation behavior over TaC when exposed to a high temperature plasma flow exceeding 2500 ˚C.

The hybrid nanostructures exhibit excellent performances in various fields such as catalysis, sensing, and energy conversion as compared to their individual ones. The thesis deals with the new methods for the synthesis of different type of hybrids with doped/pristine carbon nanostructures in the form of graphene, multiwall carbon nanotubes (MWCNTs) as one component and metals nanostructures (Ag, Pd, Pt and Au), carbide (Fe3C), metal chalcogenides (Ni3S2 and Co9S8) and oxide (CoO) as the other components. Various synthesis techniques such as modified galvanic replacement reaction at room temperature, hydrothermal, microwave and pyrolysis have been explored for the synthesis of different hybrid nanostructures. Furthermore, various hybrid nanostructures have been explored for various catalytic activities such as oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and 4-nitrophenol (4-NP) reduction. It may be noted that the ORR and OER which are undoubtedly vital for their applications in fuel cells, metal-air batteries and water oxidation reaction. Interestingly, the catalytic activities of these hybrid nanostructures are comparable or better as compared to the commercial benchmark precious catalysts.

Perovskite oxides have provided a wide variety of exotic functionalities based on their unique physical and chemical properties. By combining different perovskite oxides, interesting physical phenomena have been observed at the interfaces of perovskite heterostructures. The most interesting among these phenomena is the formation of two dimensional electron gas at the interface of two perovskite materials SrTiO3 and LaAlO3 which led to a number of fascinating physical properties such as metal-insulator transition, super-conductivity, large negative magnetoresistance and so on. This has raised the interest in exploiting the interface of various hybrids structures built on the perovskite oxide backbone. On the other hand, the two dimensional (2D) van der Waals materials such as graphene, MoS2, boron nitride etc. represent a new paradigm in the 2D electron-ics. The functionalities of these individual materials have been combined to obtain new enriched functionalities by stacking different materials together forming van der Waals heterostructures. In this work, we present a detailed study of the interface in hybrid structures made of vander Waals materials (graphene and MoS2) and their hybrids with a perovskite material namely, SrTiO3 which is known as the building block of complex oxide heterostructures. In graphene-MoS2 vertical heterostructure, we have carried out a detailed set of investigations on the modulation of the Schottky barrier at the graphene-MoS2 interface with varying external electric field. By using different stacking sequences and device structures, we obtained high mobility at large current on-off ratio at room temperature along with a tunable Schottky barrier which can be varied as high as ∼ 0.4 eV by applying electric field. We also explored the interface of graphene and SrTiO3 as well as MoS2 and SrTiO3 by electrical transport and low frequency 1/f noise measurements. We observed a hysteretic feature in the transfer characteristics of dual gated graphene and MoS2 field effect transistors on SrTiO3. The dual gated geometry enabled us to measure the effective capacitance of SrTiO3 interface which showed an enhancement indicating the possible existence of negative capacitance developed by the surface dipoles at the interface of SrTiO3 and the graphene or MoS2 channel. Our 1/f noise study and the analysis of higher order statistics of noise also support the possibility of electric field-driven reorient able surface dipoles at the interface.

Graphene-based conductor materials (GCMs) consist of stacked and decoupled layers of graphene flakes and could potentially transfer graphene’s outstanding material properties like its exceptional electrical conductivity to the macro scale, where alternatives to the heavy and expensive metallic conductors are desperately needed. To reach super-metallic conductivity however, a systematic electrical conductivity optimization regarding the structural and physical input parameters is required. Here, a new trend in the field of process and material optimization are data-based models which utilize data science methods to quickly identify and abstract information and relationships from the available data. In this work such data-based models for the conductivity of a real GCM thin-film sample are build on data generated with an especially improved and extended version of the network simulation approach by Rizzi et al. [1, 2, 3]. Appropriate methods to create data-based models for GCMs are thereby introduced and typical challenges during the modelling process are addressed, so that data-based models for other properties of GCMs can be easily created as soon as sufficient data is accessible. Combined with experimental measurements by Slawig et al. [4] the created data-based models allow for a coherent and comprehensive description of the thin-films’ electrical parameters across several length scales.:List of Figures List of Tables Symbol Directory List of Abbreviations 1 Introduction 2 Simulation approaches for graphene-based conductor materials 2.1 Traditional simulation approaches for GCMs 2.1.1 Analytical model for GCMs 2.1.2 Finite element method simulations for GCMs 2.2 A network simulation approach for GCMs 2.2.1 Geometry generation 2.2.2 Electrical network creation 2.2.3 Contact and probe setting 2.2.4 Conductivity computation 2.2.5 Results obtained with the network simulation approach 2.3 An improved implementation for the network simulation 2.3.1 Rizzi’s implementation of the network simulation approach 2.3.2 An network simulation tool for parameter studies 2.3.3 Extending the network simulation approach for anisotropy investigations and multilayer flakes 3 Data-based material modelling 3.1 Introduction to data-based modelling 3.2 Data-based modelling in material science 3.3 Interpretability of data-based models 3.4 The data-based modelling process 3.4.1 Preliminary considerations 3.4.2 Data acquisition 3.4.3 Preprocessing the data 3.4.4 Partitioning the dataset 3.4.5 Training the model 3.4.6 Model evaluation 3.4.7 Real-world applications 3.5 Regression estimators 3.5.1 Mathematical introduction to regression 3.5.2 Regularization and ridge regression 3.5.3 Support Vector Regression 3.5.4 Introducing non-linearity through kernels 4 Data-based models for a real GCM thin-film 4.1 Experimental measurements 4.2 Simulation procedure 4.3 Data generation 4.4 Creating data-based models 4.4.1 Quadlinear interpolation as benchmark model 4.4.2 KR, KRR and SVR 4.4.3 Enlarging the dataset 4.4.4 KR, KRR and SVR on the enlarged training dataset 4.5 Application to the GCM sample 5 Conclusion and Outlook 5.1 Conclusion 5.2 Outlook Acknowledgements Statement of Authorship

This diploma thesis deals with the concept of use of nanotechnology for cement composites and UHPC. In the theoretical part of this diploma thesis there are theoretical principles described for successful design of high performance concrete and characteristics of main feedstock and its production. Furthermore, there is a focus on nanoparticles, especially the ones with carbon base in the form of carbon nanotubes CNT, in addition to that, graphenes GN that are new on the market, moreover, graphene oxide GO and its application in cement composites to mechanical characteristics and its durability. The first part of the practical part devotes in trying to find out an optimal parameter for ultrasonic mix with a suitable surface active substance of three graphenes. The other two parts of the practical part are about influence of graphenes on mechanical characteristics, cement paste microstructure, and application in the mix of concrete C 35/45 and UHPC

This thesis deals with the automation of transport experiments on graphene using the graphical programming language LabVIEW. Specifically, the experiments with graphene relative humidity sensors are based on: a two-point graphene structure, a two-point structure of SiO$_2$ and a four-point graphene structure in the form of a Hall bar. In all of these experiments, relative humidity, input electrical parameters, SPM measurements, and macroscopic transport properties are measured simultaneously. The program DeviceManager developed in framework of this thesis simplifies the implementation of these experiments.

The diploma thesis deals with the possibility of using the addition of nanoparticles to improve the properties of cement composites. The theoretical part summarizes the findings of research in this area with a focus on methods of dispersion of nanoparticles and their treatment for use in cement composites. The experimental part focuses on the comparison of methods of dispersion and plasma treatment of reduced graphene oxide (rGO) nanoparticle solutions from the point of view of the agglomeration process. During this work, a method of systematic optical/visual monitoring of sedimentation/agglomeration was developed to complement sophisticated methods such as spectrophotometry (UV/Vis) and electron microscopy (SEM). Furthermore, the effect of the addition of rGO on the properties of cement mortar, in the form of aqueous solutions prepared by the dispersion methods determined in the previous section, was investigated.

This thesis focuses on the study of graphene application in electronics and technology of preparation. In addition to the basic properties of graphene, the theoretical part of the work also describes the methods of its preparation, transmission, characterization and possibilities of application in electronics. The experimental part is divided into three chapters. The first chapter deals with the production of graphene by deposition from the gaseous phase, its transmission and application in the field of solar cells. The Poly(methyl methacrylate) polymer was first used for transfer of graphene, which was later replaced by Rosin due to less contamination of graphene at the end of the transmission process. The second chapter deals with the preparation of quantum dots by exfoliation in the liquid phase from graphite and its application in voltammetry. Voltammetry was utilized in this work to detect hydrogen peroxide using a gold electrode modified by quantum dots from graphene and other dichalcogens (MoS2, MoSe2, WS2, WSe2). In the last chapter, the influence of the substrate and the deposition conditions of graphene is studied by means of a plasma-reinforced phase-out of gas to growth, while the prepared graphene was characterized by imaging and spectroscopic methods. The entire experimental growth of graphene was managed and evaluated using a planned experiment.

This diploma thesis is mainly focused on the fabrication of graphene layers on the copper foil by the Chemical Vapor Deposition (CVD). For this purpose the high-temperature chamber for the production of the graphene was completed and fully automated. The production of the high area graphene on the copper foil was experimentally achieved. The Raman microscopy and X-ray photoelectron spectroscopy measurements proved that the produced graphene is mostly a monolayer. Graphene layer was transferred on non-conductive substrate.

This diploma thesis is focused on the applications and fabrication of graphene membrane from graphene prepared by the chemical vapor deposition. Theoretical part deals with transport properties of the graphene and multiple scattering processes limiting the charge carrier mobility in this material. Included is short review of graphene membrane applications. Experimental part provides fabrication process for achieving suspended graphene device by utilizing electron beam lithography, focused ion beam, chemical etching and patterning of graphene. Graphene membrane is characterized by transport properties measurement and compared to non-suspended graphene.