<p>The main aim of this thesis is to develop and test industry-specific, applied work procedures and tools for environmental and emerging sustainability work in the graphic arts industry. This includes methods to quantify, follow-up, evaluate, manage, improve and communicate the environmental performance of activities in the graphic arts supply chain and printed products.</p><p>In order to achieve the aims of the thesis, a selection of work areas were chosen as the basis for developing the industry-specific work procedures and tools. The selected work areas are the following: environmental management (being a part of sustainability management), environmental and sustainability strategies, environmental indicators and design for environment (DfE).</p><p>The research presented in this thesis was based on survey research methods, case studies and multi-company studies. Within the framework of these methods, quantitative and qualitative techniques for data gathering were used. The companies included in the studies were selected according to their willingness, interest and motivation to participate and develop their environmental or sustainability work.</p><p>The most significant results of the research presented in this thesis regarding the selected work areas are the following:</p><p>• An evaluation of early certified environmental management systems (EMSs) in Sweden identified four areas as priorities in making the EMSs more efficient. Two of them, viz. improvement in the follow-up of environmental work, and the linking of EMSs to product design, were developed for the graphic arts industry. The remaining two areas were clarifying the identification process and assessment of environmental aspects, and streamlining and co-ordinating different management systems.</p><p>• An established and successfully tested working method for formulating and realising corporate sustainability strategies in the graphic arts industry.</p><p>• Industry-specific environmental indicator models for the graphic arts industry with defined methods for standardised inventorying and calculations. These models have been tested, used and approved of by the industry itself.</p><p>• Collected and compiled data for the developed environmental indicator models. Data have been collected from quite a large number of companies (10-20 companies for each of the printing techniques covered, i.e. coldset offset, heatset offset and gravure) over a period of several years.</p><p>• The use of the industry-specific environmental indicator models was developed and illustrated.</p><p>• A described and recommended work procedure for DfE in graphic arts companies including industry-specific tools for applying DfE to printed products, in the form of a manual and a checklist. The checklist was designed so that it can serve as a simple tool for the environmental assessment of printed products. The tools were tested by graphic arts companies.</p>

The main aim of this thesis is to develop and test industry-specific, applied work procedures and tools for environmental and emerging sustainability work in the graphic arts industry. This includes methods to quantify, follow-up, evaluate, manage, improve and communicate the environmental performance of activities in the graphic arts supply chain and printed products. In order to achieve the aims of the thesis, a selection of work areas were chosen as the basis for developing the industry-specific work procedures and tools. The selected work areas are the following: environmental management (being a part of sustainability management), environmental and sustainability strategies, environmental indicators and design for environment (DfE). The research presented in this thesis was based on survey research methods, case studies and multi-company studies. Within the framework of these methods, quantitative and qualitative techniques for data gathering were used. The companies included in the studies were selected according to their willingness, interest and motivation to participate and develop their environmental or sustainability work. The most significant results of the research presented in this thesis regarding the selected work areas are the following: • An evaluation of early certified environmental management systems (EMSs) in Sweden identified four areas as priorities in making the EMSs more efficient. Two of them, viz. improvement in the follow-up of environmental work, and the linking of EMSs to product design, were developed for the graphic arts industry. The remaining two areas were clarifying the identification process and assessment of environmental aspects, and streamlining and co-ordinating different management systems. • An established and successfully tested working method for formulating and realising corporate sustainability strategies in the graphic arts industry. • Industry-specific environmental indicator models for the graphic arts industry with defined methods for standardised inventorying and calculations. These models have been tested, used and approved of by the industry itself. • Collected and compiled data for the developed environmental indicator models. Data have been collected from quite a large number of companies (10-20 companies for each of the printing techniques covered, i.e. coldset offset, heatset offset and gravure) over a period of several years. • The use of the industry-specific environmental indicator models was developed and illustrated. • A described and recommended work procedure for DfE in graphic arts companies including industry-specific tools for applying DfE to printed products, in the form of a manual and a checklist. The checklist was designed so that it can serve as a simple tool for the environmental assessment of printed products. The tools were tested by graphic arts companies. / <p>QC 20110124</p>

<p>More and more print jobs are delivered from customer to printer digitally over the Internet. Although Internet-based job delivery can be highly efficient, companies in the graphic arts and printing industry often suffer unnecessary costs related to this type of inflow of print jobs to their production workflows. One of the reasons for this is the lack of a well-defined infrastructure for delivering print jobs digitally over the Internet. </p><p>This thesis presents INFLOW - a prototype for a print job delivery system for the graphic arts and printing industry. INFLOW is a web-based job delivery system that is hosted on an Internet-connected server by the organization receiving the print jobs. Focus has been on creating a system that is easy to use, highly customizable, secure, and easy to integrate with existing and future systems from third-party vendors. INFLOW has been implemented using open standards, such as XML and JDF (Job Definition Format). </p><p>The requirements for ease-of-use, high customizability and security are met by choosing a web-based architecture. The client side is implemented using standard web technologies such as HTML, CSS and JavaScript while the serverside is based on J2EE, Java Servlets and Java Server Pages (JSP). Using a web browser as a job delivery client provides a highly customizable user interface and built in support for encrypted file transfers using HTTPS (HTTP over SSL). </p><p>Process automation and easy integration with other print production systems is facilitated with CIP4’s JDF (Job Definition Format). INFLOW also supports"hot folder workflows"for integration with older preflight software and other hot folder-based software common in prepress workflows.</p>

More and more print jobs are delivered from customer to printer digitally over the Internet. Although Internet-based job delivery can be highly efficient, companies in the graphic arts and printing industry often suffer unnecessary costs related to this type of inflow of print jobs to their production workflows. One of the reasons for this is the lack of a well-defined infrastructure for delivering print jobs digitally over the Internet. This thesis presents INFLOW - a prototype for a print job delivery system for the graphic arts and printing industry. INFLOW is a web-based job delivery system that is hosted on an Internet-connected server by the organization receiving the print jobs. Focus has been on creating a system that is easy to use, highly customizable, secure, and easy to integrate with existing and future systems from third-party vendors. INFLOW has been implemented using open standards, such as XML and JDF (Job Definition Format). The requirements for ease-of-use, high customizability and security are met by choosing a web-based architecture. The client side is implemented using standard web technologies such as HTML, CSS and JavaScript while the serverside is based on J2EE, Java Servlets and Java Server Pages (JSP). Using a web browser as a job delivery client provides a highly customizable user interface and built in support for encrypted file transfers using HTTPS (HTTP over SSL). Process automation and easy integration with other print production systems is facilitated with CIP4’s JDF (Job Definition Format). INFLOW also supports"hot folder workflows"for integration with older preflight software and other hot folder-based software common in prepress workflows.