• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 8
  • 5
  • 2
  • 1
  • 1
  • Tagged with
  • 29
  • 29
  • 29
  • 29
  • 7
  • 6
  • 6
  • 6
  • 6
  • 5
  • 5
  • 5
  • 4
  • 4
  • 4
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
1

The use of ground penetrating radar for track substructure characterization

Vorster, Daniel Jacobus 10 June 2013 (has links)
Ground penetrating radar (GPR) has been used as a railway substructure investigation tool since the late 1990’s and has seen significant development since then. To use GPR as a more effective tool for substructure investigation, a GPR substructure characterization model was developed. This dissertation provides a detailed description of railway track components, track geometry, soil properties and classification and substructure design. The historical background of GPR is discussed together with GPR principles, basic GPR equations, hardware and accessories as well as GPR data collection, processing and interpretation. Other in situ investigation techniques namely the dynamic cone penetrometer (DCP), light weight deflectometer (LWD) , Pencel pressuremeter, surface wave testing, remote video monitoring (RVM), multi-depth deflectometers (MDD) and continuous track modulus measurement techniques are also discussed. A comparison between the different track investigation techniques was also done, with reference to sample rate, cost, effectiveness and value. Two sites in South Africa were selected for the investigation, one with good substructure conditions used for heavy haul coal export close to Vryheid (KN test section) and the other a general freight line with poor substructure conditions near Rustenburg (NT test section). These two sites were selected to develop a GPR substructure characterization model as they provided conditions ranging from poor to very good. This was supported by the analysis of the in situ soil sampling and testing. The calculation of the track substructure modulus from RVM deflection measurements showed three times higher values for the KN test section compared to the NT test section. The subballast and subgrade thickness, the GPR ballast fouling (GBF) index as well as the GPR moisture condition index was used for the classification ranges used in the model. The subballast and subgrade layer roughness values were calculated and used for the substructure classification. The GBF index and the GPR moisture condition roughness were used for the GPR fouling index classification. The GPR deliverables were divided into four classes (i.e. very good, good, moderate and poor). The evaluation of the characterization model showed that a traditional in situ investigation will cost approximately 3.7 times more than that of a GPR investigation. It would also take two thirds of the time to complete the GPR investigation compared to the traditional in situ investigation. The study showed that GPR can be used to develop a substructure characterization model and that it would be more cost effective and efficient than traditional in situ investigation techniques. GPR surveys provide continuous measurements of the track structure condition and can therefore provide a continuous classification unlike the discreet and fragmented nature of in situ investigations. However, in situ tests can be done at certain intervals within the GPR survey or at point where the GPR classification is not clear. The best solution for railway track characterization can therefore be obtained by using GPR and in situ classification in combination. / Dissertation (MEng)--University of Pretoria, 2012. / Civil Engineering / unrestricted
2

ADVANCED GPR SYSTEM FOR HIGH-PERFORMANCE TOMOGRAPHIC SUBSURFACE IMAGING

Ono, Sashi, Lee, Hua 10 1900 (has links)
International Telemetering Conference Proceedings / October 20-23, 2003 / Riviera Hotel and Convention Center, Las Vegas, Nevada / In this paper, the research prototype of a high-performance GPR imaging system is presented. The system is equipped with the capability of synthetic-aperture scan, stepfrequency FMCW illumination, and high-resolution tomographic image reconstruction.
3

Ground penetrating radar technique to locate coal mining related features: case studies in Texas

Save, Neelambari R 12 April 2006 (has links)
The goal of this research project is to identify the efficacy of the ground penetrating radar (GPR) technique in locating underground coal mine related subsidence features at Malakoff and Bastrop, Texas. The work at Malakoff has been done in collaboration with the Railroad Commission of Texas (RRC). RRC has been carrying out reclamation of abandoned underground coal mines at Malakoff since the early 1990’s. The history of the specific mining operations (at Malakoff and Bastrop) that took place in the early 1900’s has been difficult to ascertain; therefore, the use of a geophysical techniques like ground penetrating radar to identify hidden voids and potential subsidence features is vital for future reclamation process. Some of the underground mine workings at the field site have collapsed over time affecting the topography by creating sinkholes. GPR data, employing 25 MHz, 50 MHz and 100 MHz frequency antennae, have been collected in common offset patterns and azimuthal pattern. GPR data indicate the mine tunnels possibly connecting existing sinkholes by radargram hyperbolae that correspond with mine openings observed visually or during reclamation. This study also denotes the importance of understanding the variable physical properties of the stratigraphy, which could lead to false alarms by misinterpretation of the radar signals. Natural and man-made above-ground structures cause obstructions in data collection, and hence an optimal design is required for each survey. RRC successfully ground-truthed the data during its reclamation process. In turn, the acquired geophysical data helped to guide the reclamation. At Bastrop, GPR data along with historical documentation led to the conclusion that coal mining did exist in this region but is not a major concern to the immediate stability and safety of the field site. It can be concluded from both the studies that the GPR technique identifies anomalous shafts/tunnels possibly connecting potential failure.
4

The Usefulness of Ground Penetrating Radar in locating burials in Charity Hospital Cemetery, New Orleans

Mitchell, Monique Tashell 16 May 2008 (has links)
The Charity Hospital Cemetery in New Orleans, Louisiana, was used as a potter's field for over 150 years. When Charity Hospital considered selling a portion of the property ground penetrating radar (GPR) and thermal infrared (TIR) data were collected in the cemetery to locate unmarked graves. The TIR data could not be used because the expert died before compiling the TIR data. Therefore, the GPR data was the sole source of subsurface information. GPR anomalies were used to excavate 3 areas where bones and hospital supplies were subsequently found, unfortunately very limited analyses were possible on the analog GPR data. The study presented here involved digitizing data and conducting a more thorough analysis of map patterns to determine whether GPR data could be used reliably to locate burials in the cemetery. The study's result indicates that GPR is a reliable source for burial detection and other anomalies in the subsurface.
5

Optimising ground penetrating radar (GPR) to assess pavements

Evans, Robert D. January 2010 (has links)
Ground penetrating radar (GPR) technology has existed for many decades, but it has only been in the last 20 to 30 years that it has undergone great development for use in near surface ground investigations. The early 1980's saw the first major developments in the application of GPR for pavements (i.e. engineered structures designed to carry traffic loads), and it is now an established investigation technique, with generic information included in several national standard guidance documents. Analysis of GPR data can provide information on layer depths, material condition, moisture, voiding, reinforcement and location of other features. Assessing the condition of pavements, in order to plan subsequent maintenance, is essential to allow the efficient long-term functioning of the structure and GPR has enhanced and improved the range and certainty of information that can be obtained from pavement investigations. Despite the recent establishment of the technique in pavement investigation, the current situation is one in which GPR is used routinely for pavement projects in only a minority of countries, and the specialist nature of the technique and the sometimes variable results that are obtained can mean that there is both a lack of appreciation and a lack of awareness of the potential information that GPR can provide. The fact that GPR is still a developing technique, and that many aspects of its use are specialised in their nature, means that there are also several technical aspects of GPR pavement investigations which have not been fully researched, and knowledge of the response of GPR to some material conditions has not been fully established. The overall aim of this EngD research project was to provide improved pavement investigation capabilities by enhancing the methodologies and procedures used to obtain information from GPR. Several discrete research topics were addressed through various research methods including a literature review, fieldwork investigations, experimental laboratory investigations and a review of previously collected data. The findings of the research allowed conclusions and recommendations to be made regarding improved fieldwork methodologies, enhancing information and determining material condition from previously collected GPR data, assessing the effect of pavement temperature and moisture condition on GPR data and also on managing errors and uncertainty in GPR data. During the EngD project, a number of documents and presentations have been made to publicise the findings both within the EngD sponsoring company (Jacobs) and externally, and an in-house GPR capability has been established within Jacobs as a direct result of the EngD project.
6

Non-Destructive testing of concrete with ground penetrating radar

Hammarström, Elias January 2018 (has links)
Concrete structures are susceptible to deterioration over time and it is vital to continually assess concrete structures to maintain the structural integrity and prolong the service life. In recent years there has been an increased interest in non-destructive testing of concrete, i.e. assessing the state of the concrete without causing any damage to the structure in the process. There are many different techniques that falls under the term non-destructive testing and one of these that have gained prominence during the last few years is Georadar or ground penetrating radar, often shortened as GPR. GPR is a technique where microwaves are sent into the surface of the concrete by a device, the waves will reflect back to the device when encountering interfaces of areas with different electric properties. The waves are then received by the same device indicating the internal structure of the concrete. This makes the technique an excellent way to find reinforcement bars as the electric properties of concrete and metal strongly differ. In theory though, the technique should also be able to detect other internal differences in concrete, such as voids and corrosion areas but further research is still needed in these areas. This aim of this report is to evaluate ground penetrating radar as a non-destructive technique for assessment of concrete structures. In order to do this different tests has been conducted to evaluate the general performance and usability with a literature review introducing the science behind and what conclusions other researches has reached and using a testing methodology to reach the results. The tests can in a simple way be divided into two parts, first lab tests on a slab in a controlled setting where the internal structure was known, and then two shorter field trips in order to evaluate the performance properly insitu. The results were, to some extent, ambiguous. Although it was found that GPR is an excellent method for finding and locating near-surface reinforcement it was also concluded that the results could vary significantly depending on the location. In one of the field trips the performance of the GPR technique was compared to the performance of traditional cover meter and in this case the portability of the cover meter outperformed the somewhat clunky handling of the GPR. The concrete cover measurement using post-processing of the radar data gave a rough estimate, but once again evaluation still relied on the insitu conditions and the estimate were sometimes questionable. Finding reinforcement below the first layer yielded differing results and it was concluded that further tests were needed to fully evaluate the capabilities of the technique in this regard. The conclusions of the thesis was that although the tests show some potential for the method the results expected from GPR would strongly depend on suitability of the project and experience of the user. One important limiting factor was the availability of devices. For the current project only one specific device was used, it was theorized that another GPR device could get better results depending on the purpose. Furthermore, the lack of experience was also considered to be a limiting factor that might have had an effect on the results. For future research more tests on lower reinforcement and tests on detection of deterioration were suggested. Comparative studies with other similar non-destructive techniques were also considered to be an area of possible interest.
7

Full-waveform Inversion of Common-Offset Ground Penetrating Radar (GPR) data

Jazayeri, Sajad 27 March 2019 (has links)
Maintenance of aging buried infrastructure and reinforced concrete are critical issues in the United States. Inexpensive non-destructive techniques for mapping and imaging infrastructure and defects are an integral component of maintenance. Ground penetrating radar (GPR) is a widely-used non-destructive tool for locating buried infrastructure and for imaging rebar and other features of interest to civil engineers. Conventional acquisition and interpretation of GPR profiles is based on the arrival times of strong reflected/diffracted returns, and qualitative interpretation of return amplitudes. Features are thereby generally well located, but their material properties are only qualitatively assessed. For example, in the typical imaging of buried pipes, the average radar wave velocity through the overlying soil is estimated, but the properties of the pipe itself are not quantitatively resolved. For pipes on the order of the radar wavelength (<5-35 cm), pipe dimensions and infilling material remain ambiguous. Full waveform inversion (FWI) methods exploit the entire radar return rather than the time and peak amplitude. FWI can generate better quantitative estimates of subsurface properties. In recent decades FWI methods, developed for seismic oil exploration, have been adapted and advanced for GPR with encouraging results. To date, however, FWI methods for GPR data have not been specifically tuned and applied on surface collected common offset GPR data, which are the most common type of GPR data for engineering applications. I present an effective FWI method specifically tailored for common-offset GPR data. This method is composed of three main components, the forward modeling, wavelet estimation and inversion tools. For the forward modeling and iterative data inversion I use two open-source software packages, gprMax and PEST. The source wavelet, which is the most challenging component that guarantees the success of the method, is estimated with a novel Sparse Blind Deconvolution (SBD) algorithm that I have developed. The present dissertation indicates that with FWI, GPR can yield better quantitative estimates, for example, of both the diameters of small pipes and rebar and their electromagnetic properties (permittivity, conductivity). Also better estimates of electrical properties of the surrounding media (i.e. soil or concrete) are achieved with FWI.
8

Radar Processing Techniques for Using the LimeSDR Mini as a Short-Range LFM Radar

Stratford, Jacob Scott 18 July 2023 (has links) (PDF)
Drone-mounted ground penetrating radar (GPR) has the capability to investigate terrain that is inaccessible or hazardous to humans. A linear frequency-modulated (LFM) radar with the potential for GPR applications is described based on the LimeSDR Mini software defined radio (SDR). Challenges of the LimeSDR Mini radar include the SDR's lack of support for transmitter-receiver synchronization and high bleedthrough leakage. These issues are overcome through corrective software processing techniques including deconvolution of the SDR's system impulse response and digital feed-through nulling. Feed-through nulling is effective at reducing bleedthrough leakage, achieving a 26 dB reduction in power. Although high noise can confound the identification of targets with small radar cross sections in dynamic environments, the LimeSDR Mini radar is demonstrated to display a moving target across multiple ranges. This research demonstrates the increasing accessibility of SDR radar for drone applications, as the LimeSDR Mini is lightweight and low-cost compared to high-end SDRs typically used in SDR radar.
9

Numerical modelling of high-frequency ground-penetrating radar antennas

Warren, Craig January 2009 (has links)
Ground-Penetrating Radar (GPR) is a non-destructive electromagnetic investigative tool used in many applications across the fields of engineering and geophysics. The propagation of electromagnetic waves in lossy materials is complex and over the past 20 years, the computational modelling of GPR has developed to improve our understanding of this phenomenon. This research focuses on the development of accurate numerical models of widely-used, high-frequency commercial GPR antennas. High-frequency, highresolution GPR antennas are mainly used in civil engineering for the evaluation of structural features in concrete i. e., the location of rebars, conduits, voids and cracking. These types of target are typically located close to the surface and their responses can be coupled with the direct wave of the antenna. Most numerical simulations of GPR only include a simple excitation model, such as an infinitesimal dipole, which does not represent the actual antenna. By omitting the real antenna from the model, simulations cannot accurately replicate the amplitudes and waveshapes of real GPR responses. Numerical models of a 1.5 GHz Geophysical Survey Systems, Inc. (GSSI) antenna and a 1.2 GHz MALÅ GeoScience (MALÅ) antenna have been developed. The geometry of antennas is often complex with many fine features that must be captured in the numerical models. To visualise this level of detail in 3d, software was developed to link Paraview—an open source visualisation application which uses the Visualisation Toolkit (VTK)—with GprMax3D—electromagnetic simulation software based on the Finite-Difference Time-Domain (FDTD) method. Certain component values from the real antennas that were required for the models could not be readily determined due to commercial sensitivity. Values for these unknown parameters were found by implementing an optimisation technique known as Taguchi’s method. The metric used to initially assess the accuracy of the antenna models was a cross-corellation of the crosstalk responses from the models with the crosstalk responses measured from the real antennas. A 98 % match between modelled and real crosstalk responses was achieved. Further validation of the antenna models was undertaken using a series of laboratory experiments where oil-in-water (O/W) emulsions were created to simulate the electrical properties of real materials. The emulsions provided homogeneous liquids with controllable permittivity and conductivity and enabled different types of targets, typically encountered with GPR, to be tested. The laboratory setup was replicated in simulations which included the antenna models and an excellent agreement was shown between the measured and modelled data. The models reproduced both the amplitude and waveshape of the real responses whilst B-scans showed that the models were also accurately capturing effects, such as masking, present in the real data. It was shown that to achieve this accuracy, the real permittivity and conductivity profiles of materials must be correctly modelled. The validated antenna models were then used to investigate the radiation dynamics of GPR antennas. It was found that the shape and directivity of theoretically predicted far-field radiation patterns differ significantly from real antenna patterns. Being able to understand and visualise in 3d the antenna patterns of real GPR antennas, over realistic materials containing typical targets, is extremely important for antenna design and also from a practical user perspective.
10

Sedimentological Characteristics and 3-D Internal Architecture of Washover Deposits from Hurricanes Frances, Ivan, and Jeanne

Horwitz, Mark H 13 November 2008 (has links)
Extensive overwash occurred along Florida's Atlantic and northern Gulf facing barrier islands during the passages of Hurricanes Frances, Ivan, and Jeanne in 2004. These high-energy storm events provided a unique opportunity to study the spatial depositional patterns and internal sedimentary architecture of fresh washover deposits resulting from inundation to collision regime overwash events. Sedimentological characteristics and 3-D internal architecture of the washover deposits were studied through coring, trenching, sediment analysis, ground penetrating radar (GPR) surveys, and pre- and post-storm aerial photography and LiDAR topographic survey data. The cross-shore extent of washover deposition is controlled by sediment supply, accommodation space, and the extent of cross-shore penetration of overwash flow. Antecedent morphology of the beach or barrier island is the primary factor governing sediment supply and accommodation space. Antecedent morphology coupled with spatio-temporal factors including storm position, intensity, and duration govern the extent of landward excursion of overwash flow. Washover deposition ranges from thin deposits, limited in cross-shore extent to the beach berm, to extensive sheet-like sediment bodies extending across an entire barrier island profile. Four sedimentary facies are recognized, which can be related to antecedent morphology. Berm facies, dominates the beach and seaward side of the foredune, and is characterized by a basal erosional surface and seaward dipping planar stratification. Back-berm facies extends landward from the dune crest down the backside of the foredune, exhibits little evidence of erosion along the basal contact, and is dominated by landward inclined stratification. Platform facies, largely confined to the interior platform, exhibits little evidence of erosion along the pre-storm surface, and horizontal to gently landward dipping parallel stratification, which merges landward with, and commonly overlies steeply landward dipping foreset stratification. Antecedent hummocky dunes may be preserved within platform facies. The landward most facies, backbay facies is dominated by subaqueous deposition within the back bay, and is characterized by steeply landward dipping tabular foreset and sigmoidal stratification. In the longshore direction, backbay facies exhibit trough and mound GPR reflective patterns, representing washover sediment ridges and troughs oriented parallel to the primary flow direction, and illustrate the highly 3-dimesional nature of the washover deposits.

Page generated in 0.123 seconds