No description available.

No description available.

Zugl.: Darmstadt, Techn. Univ., Diss., 2009

Techn. Hochsch., Diss., 2003--Aachen.

Gallium Nitride (GaN) is considered a very promising material for use in the field of power devices as its application in power systems would result in a significant increase in the power density, reduced power losses, and the potential to operate at high frequencies. The wide bandgap of the material allows a high critical electric field to be sustained which can lead to the design of devices with a shorter drift region, and therefore with lower on-state resistance, if compared to a silicon-based device with the same breakdown voltage. The use of an AlGaN/GaN heterostructure allows the formation of a two-dimensional electron gas (2DEG) at the heterointerface where carriers can reach very high mobility values. These properties can lead to the production of High Electron Mobility Transistors (HEMTs) and Schottky barrier diodes with superior performance, even when compared to devices based on state-of-the-art technologies such as Silicon Carbide or superjunctions. Furthermore, epitaxial growth of GaN layers on silicon wafers allows a significant reduction in the production cost and makes these devices competitive from a price perspective. This thesis will deal with a variety of topics concerning the characterization, design and optimization of AlGaN/GaN HEMTs and Schottky diodes with a 600 to 650V rating. Discussion will span several topics from device cross-section physics to circuit implementation and will be based on both experimental results and advanced modelling. More specifically, the thesis is concerned with the characterization of AlGaN/GaN Schottky diodes and extraction of their main parameters such as ideality factor, barrier height and series resistance. A thorough investigation of their reverse recovery performance and a comparison to competing technologies is also given. Several topics which concern the operation of AlGaN/GaN HEMTs are then discussed. The underlying physics of p-gate enhancement mode transistors are analysed followed by a discussion of the challenges associated with the implementation of these devices at a circuit level. Finally, a comparison of the performance of a specific area-saving layout (Bonding pad over active area) and a conventional design is given. The thesis aims to significantly enhance the understanding of the behaviour of these devices to enable better or new commercial designs to emerge.

abstract: Gallium Nitride (GaN) based microelectronics technology is a fast growing and most exciting semiconductor technology in the fields of high power and high frequency electronics. Excellent electrical properties of GaN such as high carrier concentration and high carrier motility makes GaN based high electron mobility transistors (HEMTs) a preferred choice for RF applications. However, a very high temperature in the active region of the GaN HEMT leads to a significant degradation of the device performance by effecting carrier mobility and concentration. Thus, thermal management in GaN HEMT in an effective manner is key to this technology to reach its full potential. In this thesis, an electro-thermal model of an AlGaN/GaN HEMT on a SiC substrate is simulated using Silvaco (Atlas) TCAD tools. Output characteristics, current density and heat flow at the GaN-SiC interface are key areas of analysis in this work. The electrical characteristics show a sharp drop in drain currents for higher drain voltages. Temperature profile across the device is observed. At the interface of GaN-SiC, there is a sharp drop in temperature indicating a thermal resistance at this interface. Adding to the existing heat in the device, this difference heat is reflected back into the device, further increasing the temperatures in the active region. Structural changes such as GaN micropits, were introduced at the GaN-SiC interface along the length of the device, to make the heat flow smooth rather than discontinuous. With changing dimensions of these micropits, various combinations were tried to reduce the temperature and enhance the device performance. These GaN micropits gave effective results by reducing heat in active region, by spreading out the heat on to the sides of the device rather than just concentrating right below the hot spot. It also helped by allowing a smooth flow of heat at the GaN-SiC interface. There was an increased peak current density in the active region of the device contributing to improved electrical characteristics. In the end, importance of thermal management in these high temperature devices is discussed along with future prospects and a conclusion of this thesis. / Dissertation/Thesis / Masters Thesis Electrical Engineering 2016

High electron mobility transistors (HEMTs) have long been studied for high frequency and high-power application. Among widely known high electron mobility transistors, AlGaN/GaN HEMTs are having the upper hand due to high electron mobility of the GaN channel. Over the times, issues like current collapse, gate leakage, self-heating and gate lag have questioned the performance and reliability of these devices. In the recent years, engineers have come up with newer architectures to address some of these issues. Inserting a high-k dielectric oxide layer in the gate stack proved to be an effective solution to mitigate gate leakage, reduce interfacial traps and improve optimal working conditions. This work aims to study the reliability aspect of these so-called metal-oxide-semiconductor high electron mobility transistors (MOS-HEMT) specifically, HfO2 and HfZrO2 MOS-HEMTs. It was found through numerical simulations that though HfO2 and HfZrO2 dielectrics were able to mitigate gate leakage current, they tend to accumulate more heat in the channel region with respect to the conventional silicon nitride (SiN) passivated counterparts. Moreover, few asymmetric structures were proposed where silicon nitride was placed in the dielectric layer along with HfO2/HfZrO2. In this study it was found that these asymmetric structures showed superior thermal performance while showing near-zero gate leakage current.

The observation of voltage-tunable plasmon resonances in the terahertz range in two dimensional electron gas (2-deg) of a high electron mobility transistor (HEMT) fabricated from the InGaAs/InP and AlGaN/GaN materials systems is reported. The devices were fabricated from a commercial HEMT wafer by depositing source and drain contacts using standard photolithography process and a semi-transparent gate contact that consisted of a 0.5 [micro]m period transmission grating formed by electron-beam lithography. Narrow-band resonant absorption of THz radiation was observed in transmission in the frequency range 10-100 cm-1. The resonance frequency depends on the gate voltage-tuned sheet-charge density of the 2deg. The fundamental and higher resonant harmonics were observed to shift towards lower frequencies with the implementation of negative gate bias. The theory of interaction of sub millimeter waves with 2deg through corrugated structure on top has been applied to calculate and understand the phenomena of resonant plasmon excitations. The observed separation of resonance fundamental from its harmonics and their shift with gate bias follows theory, although the absolute frequencies are lower by about a factor of 2-3 in InGaAs/InP system. However, calculated values match much better with AlGaN/GaN system.

No description available.

No description available.