In this thesis, two novel broadband slot mobile phone antenna designs respectively for penta-band WWAN operation and eight-band LTE/WWAN operation are presented. The antennas are suitable to be mounted near the bottom edge of the system ground plane of the mobile phone. Good radiation characteristics for the antennas are obtained, and the two antennas respectively occupy a small printed area of 50 ¡Ñ 4 mm2 and 53 ¡Ñ 4 mm2. The first design uses a C-shaped strip connected to the bottom edge of the system ground plane to make the structure of the system ground plane close to a symmetric shorted dipole antenna. This makes it promising to excite a chassis mode to enhance the operating bandwidth of the antenna. The second one uses a microstrip feedline having a chip-inductor-loaded branch. The novel microstrip feedline can lead to more uniform distribution of the electric fields excited in the slot such that enhanced bandwidth of the antenna¡¦s lower band is obtained. Further, since the chip inductor performs like a low-pass filter, the original bandwidth of the antenna¡¦s upper band is not affected. Additionaly, the impedance matching of the lower frequencies of the upper band can be improved, which enhances the upper-band bandwidth of the antenna. Effects of the user¡¦s head and hand on the proposed antenna are also studied, and the simulated SAR and HAC issues are also analyzed in this thesis.

Studies of the optimum isolation in a multi-mode PDA phone are presented in this thesis. Firstly, we analyze the optimum isolation between the DCS and GPS antennas embedded in a dual-mode PDA phone. Then, we change the antenna types of the DCS system to study again the behavior of the optimum isolation. Secondly, we analyze the optimum isolation between a DCS antenna and a WLAN antenna embedded in a dual-mode PDA phone. Finally, we propose a multi-mode PDA phone for DCS, GPS, and WLAN operations with good isolation among the three internal antennas.

An internal eight-band LTE/WWAN handset antenna integrated with a USB connector is presented. The proposed antenna comprises an antenna ground which faces a protruded ground extended from the main ground of the handset to accommodate a USB connector. The antenna ground is used as a shorting portion to short-circuit the antenna to ground such that the coupling between the antenna ground and the protruded ground is effectively suppressed. In this case, the proposed antenna can be integrated with a USB connector mounted on the protruded ground, leading to compact integration of the antenna inside the handset. Good radiation characteristics of the antenna are also obtained, and the proposed antenna occupies 60 ¡Ñ 12 ¡Ñ 4.8 mm3 (about 3.4 cm3) only. Effects of the user¡¦s head and hand on the proposed antenna are studied, and the simulated SAR and HAC results are also analyzed in this thesis.

In this thesis, two types of handset antenna design respectively for dual-band GSM850/1900 operation and seven¡Vband LTE/WWAN operation are presented. The proposed antennas can achieve decreased antenna size and enhanced operating bandwidth by shaping the system ground plane of the handset. The seven-band LTE/WWAN antenna is printed on the system circuit board with good radiation characteristics and occupies a small size of 24.5 x 10 mm2. At first, we propose a half-loop antenna structure which integrates its facing edge of the system ground plane as the resonant path of the antenna. In this case, the required length of the half-loop antenna structure is only about a half compared with the traditional loop antenna. Next, to enhance the operating bandwidth of the antenna, a parasitic shorted monopole strip is added and a shaped system circuit board is used. The shaped system circuit board can integrate the battery with the circuit board to help reduce the thickness of handset. Also, much enhanced operating bandwidth for the lower band can be obtained, owing to the enhanced surface current excitation in the system ground plane resulting from properly shaping the system circuit board. Effects of the user¡¦s head and hand on the proposed antenna are studied, and the simulated SAR and HAC results are also analyzed for bio-compatibility issue.

In this thesis, an internal mobile phone antenna with a distributed matching circuit for eight-band LTE/WWAN operation is presented. By selecting proper dimensions of the distributed matching circuit, the bandwidth of the proposed antenna can be greatly enhanced. Good radiation characteristics are also obtained, and the proposed antenna occupies only 60 ¡Ñ 10 ¡Ñ 3 mm^3 and is very suitable for slim mobile phone applications. Effects of the human body including user¡¦s head and hand are also studied, and the SAR and HAC issues are simulated and analyzed in this thesis.