Desde o início da história da aviação, a cada novo projeto de aeronave, modificações são realizadas para se obter melhorias nas características aerodinâmicas como, por exemplo, diminuição do arrasto, aumento de sustentação, melhora na manobrabilidade em elevados ângulos de ataque, entre outras. Essas modificações podem ser feitas em diversas partes de uma aeronave como, por exemplo, no perfil aerodinâmico e enflechamento da asa, nas superfícies de controle e até em novas posições da entrada de ar do motor intake. Embora os conceitos de aeronaves com asas de enflechamento negativo, Canard e intake dorsal não sejam novos, ainda não existe uma aeronave que apresente essas três características juntas. Portanto, o presente trabalho teve como objetivo estudar uma aeronave não convencional com essas características. Para isso, testes foram realizados no túnel de vento do Laboratório de Aerodinâmica (LAE), do Departamento de Engenharia Aeronáutica da Escola de Engenharia de São Carlos, da Universidade de São Paulo. Três estudos foram realizados para diferentes ângulos de ataque da aeronave e diferentes ângulos de incidência de três pares de Canard projetados, que foram colocados em duas posições diferentes em relação à asa. No primeiro estudo, as forças aerodinâmicas atuantes na aeronave foram medidas por meio de uma balança aerodinâmica para se obter relações entre seus coeficientes e a eficiência conforme a troca dos pares de Canard. Posteriormente, o estudo do escoamento na entrada do intake dorsal englobou a relação entre a velocidade local no intake, a velocidade do escoamento livre e a recuperação de pressão total no mesmo. Por fim, um mapeamento da vorticidade no campo da asa foi realizado para se analisar a influência do Canard no escoamento raiz da asa. O modelo estudado obteve uma maior eficiência e menor arrasto em elevados ângulos de ataque para ângulos de incidência negativos de Canard. O Canard que se destacou nos dois primeiros estudos foi utilizado no estudo de mapeamento, porém, não apresentou uma influência no escoamento da raiz da asa como desejado. / Since the beginning of aviation history, in each new aircraft design, modifications are made to obtain improvements in aerodynamic characteristics such as drag reduction, increase of lift, improvement in maneuverability at high angles of attack. These modifications can be made in different parts of an aircraft, such as, aerodynamic profile, on the control surfaces and even in new intake positions. Although the concepts of aircraft with forward swept wing, Canard and dorsal intake are not new, there is still no aircraft that presents these three characteristics together. Therefore, the present work had as objective to study an unconventional aircraft with these characteristics. Wind tunnel tests were carried out in order to analyze the aerodynamic characteristics at the Aerodynamics Laboratory of the Department of Aeronautical Engineering of EESC-USP. Three studies were carried out for different angles of attack of the aircraft and different angles of incidence of three pairs of Canard, which were placed in two different positions in relation to the wing. In the first study, the aerodynamic forces acting on the aircraft were measured by an aerodynamic balance to obtain relations between their coefficients and the efficiency according to the change of the Canard pairs. Subsequently, the study of flow at the entrance of the dorsal intake included the relation between the local velocity at the intake and the velocity of the free flow and the total pressure recovery. Finally, a mapping of vorticity in the wing field was performed to analyze the influence of Canard on the boundary layer at the root of the wing. The model studied obtained higher efficiency and lower drag at high angles of attack at negative Canard angles of incidence. The Canard that stood out in the first two studies was used in the mapping study, however, it did not present an influence on the root of the wing as desired.

<p>This thesis deals with Computational Fluid Dynamics (CFD)simulations of the flow around delta wings at high angles ofattack. These triangular wings, mainly used in militaryaircraft designs, experience the formation of two vortices ontheir lee-side at large angles of attack. The simulation ofthis vortical flow by solving the Navier-Stokes equations isthe subject of this thesis. The purpose of the work is toimprove the understanding of this flow and contribute to thedesign of such a wing by developing methods that enable moreaccurate and efficient CFD simulations.</p><p>Simulations of the formation, burst and disappearance of thevortices while the angle of attack is changing are presented.The structured flow solver NSMB has been used to get thetime-dependent solutions of the flow. Both viscous and inviscidresults of a 70°-swept delta wing pitching in anoscillatory motion are reported. The creation of the dynamiclift and the hysteresis observed in the history of theaerodynamic forces are well reproduced.</p><p>The second part of the thesis is focusing on automatic meshrefinement and its influence on simulations of the delta wingleading-edge vortices. All the simulations to assess the gridquality are inviscid computations performed with theunstructured flow solver EDGE. A first study reports on theeffects of refining thewake of the delta wing. A70°-swept delta wing at a Mach number of 0.2 and an angleof attack of 27° where vortex breakdown is present abovethe wing, is used as testcase. The results show a strongdependence on the refinement, particularly the vortex breakdownposition, which leads to the conclusion that the wake should berefined at least partly. Using this information, a grid for thewing in the wind tunnel is created in order to assess theinfluence of the tunnel walls. Three sensors for automatic meshrefinement of vortical flows are presented. Two are based onflow variables (production of entropy and ratio of totalpressures) while the third one requires an eigenvalue analysisof the tensor of the velocity gradients in order to capture theposition of the vortices in the flow. These three vortexsensors are successfully used for the simulation of the same70° delta wing at an angle of attack of 20°. Acomparison of the sensors reveals the more local property ofthe third one based on the eigenvalue analysis. This lattertechnique is applied to the simulation of the wake of a deltawing at an angle of attack of 20°. The simulations on ahighly refined mesh show that the vortex sheet shed from thetrailing-edge rolls up into a vortex that interacts with theleading-edge vortex. Finally the vortex-detection technique isused to refine the grid around a Saab Aerosystems UnmannedCombat Air Vehicle (UCAV) configuration and its flight dynamicscharacteristics are investigated.</p><p><b>Key words:</b>delta wing, high angle of attack, vortex,pitching, mesh refinement, UCAV, vortex sensor, tensor ofvelocity gradients.</p>

No description available.

The objective of the present research is to investigate unsteady aerodynamic models with state equation representations that are valid up to the high angle of attack regime with the purpose of evaluating them as computationally affordable models that can be used in conjunction with the equations of motion to simulate wing rock. The unsteady aerodynamic models with state equation representations investigated are functional approaches to modeling aerodynamic phenomena, not directly derived from the physical principles of the problem. They are thought to have advantages with respect to the physical modeling methods mainly because of the lower computational cost involved in the calculations. The unsteady aerodynamic multi-axis models with state equation representations investigated in this report assume the decomposition of the airplane into lifting surfaces or panels that have their particular aerodynamic force coefficients modeled as dynamic state-space models. These coefficients are summed up to find the total aircraft force coefficients. The products of the panel force coefficients and their moment arms with reference to a given axis are summed up to find the global aircraft moment coefficients. Two proposed variations of the state space representation of the basic unsteady aerodynamic model are identified using experimental aerodynamic data available in the open literature for slender delta wings, and tested in order to investigate their ability to represent the wing rock phenomenon. The identifications for the second proposed formulation are found to match the experimental data well. The simulations revealed that even though it was constructed with scarce data, the model presented the expected qualitative behavior and that the concept is able to simulate wing rock. / Ph. D.

Harmonic oscillatory tests for a fighter aircraft using the Dynamic Plunge--Pitch--Roll model mount at Virginia Tech Stability Wind Tunnel are described. Corresponding data reduction methods are developed on the basis of multirate digital signal processing. Since the model is sting mounted, the frequencies associated with sting vibration are included in balance readings thus a linear filter must be used to extract out the aerodynamic responses. To achieve this, a Finite Impulse Response (FIR) is designed using the Remez exchange algorithm. Based on the reduced data, a state–space model is developed to describe the unsteady aerodynamic characteristics of the aircraft during roll oscillations. For this model, we chose to separate the aircraft into panels and model the local forces and moments. Included in this technique is the introduction of a new state variable, a separation state variable which characterizes the separation for each panel. This new variable is governed by a first order differential equation. Taylor series expansions in terms of the input variables were performed to obtain the aerodynamic coefficients of the model. These derivatives, a form of the stability derivative approach, are not constant but rather quadratic functions of the new state variable. Finally, the concept of the model was expanded to allow for the addition of longitudinal motions. Thus, pitching moments will be identified at the same time as rolling moments. The results show that the goal of modeling coupled longitudinal and lateral–directional characteristics at the same time using the same inputs is feasible. / Master of Science

Small wind turbines that operate in low-wind environments are prone to suffer performance degradation as they often fail to accelerate to a steady, power-producing condition. The behaviour during this process is called “starting behaviour” and it is the subject of this present work. This thesis evaluates potential benefits that can be obtained from the improvement of starting behaviour, investigates, in particular, small wind turbine starting behaviour (both horizontal- and vertical-axis), and presents aerofoil performance characteristics (both steady and unsteady) needed for the analysis. All of the investigations were conducted using a new set of aerodynamic performance data of six aerofoils (NACA0012, SG6043, SD7062, DU06-W-200, S1223, and S1223B). All of the data were obtained at flow conditions that small wind turbine blades have to operate with during the startup - low Reynolds number (from 65000 to 150000), high angle of attack (through 360◦), and high reduced frequency (from 0.05 to 0.20). In order to obtain accurate aerodynamic data at high incidences, a series of CFD simulations were undertaken to illustrate effects of wall proximity and to determine test section sizes that offer minimum proximity effects. A study was carried out on the entire horizontal-axis wind turbine generation system to understand its starting characteristics and to estimate potential benefits of improved starting. Comparisons of three different blade configurations reveal that the use of mixed-aerofoil blades leads to a significant increase in starting capability. The improved starting capability effectively reduces the time that the turbine takes to reach its power-extraction period and, hence, an increase in overall energy yield. The increase can be as high as 40%. Investigations into H-Darriues turbine self-starting capability were made through the analogy between the aerofoil in Darrieus motion and flapping-wing flow mechanisms. The investigations reveal that the unsteadiness associated with the rotor is key to predicting its starting behaviour and the accurate prediction can be made when this transient aerofoil behaviour is correctly modelled. The investigations based upon the analogy also indicate that the unsteadiness can be exploited to promote the turbine ability to self-start. Aerodynamically, this exploitation is related to the rotor geometry itself.

This paper will investigate the development of a landing footprint for a re-entry vehicle. Vehicles can re-enter the atmosphere with a range of orientations, velocities and flight path angles. The central question is whether a vehicle with any combination of these states can be brought to an acceptable landing condition at a particular landing site and with a particular landing speed. To aide in this investigation several models must be implemented, including that of the atmosphere, the vehicles, the Earth, and the aerodynamics. A detailed analysis of the aerodynamic model will be treated, and the equations of motion subject to these aerodynamic laws will then be compared to results from existing atmospheric reentry software. The principles of optimization will then be employed to generate the footprint of landable states, based on maximum and minimum possible downrange distances, for two vehicle concepts.

No description available.

No description available.

Adaptive control designs using neural networks (NNs) based on dynamic inversion are investigated for aerospace vehicles which are operated at highly nonlinear dynamic regimes. NNs play a key role as the principal element of adaptation to approximately cancel the effect of inversion error, which subsequently improves robustness to parametric uncertainty and unmodeled dynamics in nonlinear regimes. An adaptive control scheme previously named composite model reference adaptive control is further developed so that it can be applied to multi-input multi-output output feedback dynamic inversion. It can have adaptive elements in both the dynamic compensator (linear controller) part and/or in the conventional adaptive controller part, also utilizing state estimation information for NN adaptation. This methodology has more flexibility and thus hopefully greater potential than conventional adaptive designs for adaptive flight control in highly nonlinear flight regimes. The stability of the control system is proved through Lyapunov theorems, and validated with simulations. The control designs in this thesis also include the use of pseudo-control hedging techniques which are introduced to prevent the NNs from attempting to adapt to various actuation nonlinearities such as actuator position and rate saturations. Control allocation is introduced for the case of redundant control effectors including thrust vectoring nozzles. A thorough comparison study of conventional and NN-based adaptive designs for a system under a limit cycle, wing-rock, is included in this research, and the NN-based adaptive control designs demonstrate their performances for two highly maneuverable aerial vehicles, NASA F-15 ACTIVE and FQM-117B unmanned aerial vehicle (UAV), operated under various nonlinearities and uncertainties.