Spelling suggestions: "subject:"highperformance liquid chromatography"" "subject:"highperformance liquid chromatography""
31 |
High performance liquid chromatographic determination of (-)-epicathechin in cocoa beans and the effects of varietal types, curing, and roasting on its concentrationKim, Henry. January 1982 (has links) (PDF)
Thesis (Ph. D.)--Pennsylvania State University, 1982. / Includes bibliographical references.
|
32 |
Design and development of acquisition, control and processing software for two dimensional high performance liquid chromatographyToups, Erich P. January 2004 (has links)
Thesis (MSc. (Hons.))--University of Western Sydney, 2004. / A thesis presented to the University of Western Sydney, College of Science, Technology and Environment, School of Science, Food and Horticulture, in fulfilment of the requirements for the degree of Master of Science (Honours). Includes bibliographies.
|
33 |
Development of methodology for high performance liquid chromatographicseparation of inorganic ions譚偉明, Tam, Wai-ming. January 1990 (has links)
published_or_final_version / Chemistry / Doctoral / Doctor of Philosophy
|
34 |
Exploring biodegradation of emerging pollutants using next generation sequencing and UPLC-MS-MS techniquesYu, Ke, 余珂 January 2014 (has links)
This study was conducted to set up a systematic approach utilizing advantages of both wet lab and bioinformatic methodologies to study biodegradation abilities and microbial bacterial-functional relationship within bioremediation communities.
Firstly, 11pharmaceuticals and personal care products (PPCPs)were selected as target chemicals for establishing an effective determination process in analyzing trace-level concentrations in the environment, and understanding the removal routes during pollutants removal process in wastewater treatment process using activated sludge. Ultra performance liquid chromatography-tandem mass spectrometry was utilized to develop a rapid, sensitive and reliable method without solid phase extraction pre-concentration for trace analysis of 11 PPCPs in influent and effluent from municipal wastewater treatment plants. Shorten the detection time and significant reduction of detection cost were achieved due to the omitting usage of solid phase extraction (SPE)process and avoiding the consumption of hydrophiliclipophilic balancced (HLB)cartridge.
Research on removal routes of ten selected PPCPs in activated sludge found activated sludge hardly removed carbamazepine. Biodegradation was the sole route to remove acyclovir, metronidazole, benzylparaben, ethylparaben, methylparaben and propylparaben. Both adsorption and biodegradation were involved in the removal of ranitidine and benzophenone-3, while fluoxetine could be totally removed by adsorption in activated sludge.
Secondly, as the target microbial community, activated sludge community was used to set up the global bioinformatic analysis process. Both metagenomic and metatranscriptomic approaches were processed to characterize microbial structure and gene expression of activated sludge community. The taxonomic profile showed thatactivated sludge was dominated by Proteobacteria, Actinobacteria, Bacteroidetes, Firmicutes and Verrucomicrobiaphyla. Gene expression annotation of nitrogen removal revealed that denitrification-related genes sequences dominated in both DNA and cDNA datasets while nitrifying genes were also expressed in relative high levels. Specially, ammonia monooxygenase and hydroxylamine oxidase demonstrated the high cDNA/DNA ratios, indicating strong nitrification activity. Ammonia-oxidizing bacteria present mainly belonged to Nitrosomonas and Nitrosospira species.
A fast method to construct local sub-databases has been established for the quick similarity search and annotation of huge metagenomic datasets. The conducted tests showed sub-database annotation pipeline achieved a speedup of ~150-385 times, and got exactly the same annotation results with those of the direct NCBI-nr database BLAST-MEGAN method. This approach provides a new time-efficient and convenient annotation similarity search strategy for laboratories without access to high performance computing facilities.
Thirdly, bisphenol A(BPA), which has a partially known biodegradation pathway and relevant bioremediating genes, was chosen as a model to establish a pipeline for systematical understanding the pathways and gene/bacteria relationships in an enriched microbial community. 11 new metabolites were detected during BPA degradation. Thereby, a novel pathway of degrading BPA metabolite was proposed. Sphingomonas strains were dominant taxa in initial degradation of BPA, while the other taxa were competing BPA metabolites during degradation. Metagenomic binning results showed a cytochrome P450 monooxygenase system, which was previously reported BPA mediator, was sharing by two Sphingomonas strains, showing the undergoing mechanism of competition of the two strains. The observations suggested bacterial specialization may occur in that community that each taxon was selected to degrade certain metabolite in a community economical way. / published_or_final_version / Civil Engineering / Doctoral / Doctor of Philosophy
|
35 |
A comparative study of ethanolic versus triturated dilutions in terms of the amount of caffeine extracted from Coffea tosta by means of high pressure liquid chromatographyHarris, Bronwyn Claire January 2002 (has links)
A mini-dissertation in partial compliance with the requirements for a Master's Degree in Technology: Homoeopathy, Durban Institute of Technology, 2002. / The purpose of this study was to compare the amount of caffeine extracted from triturated samples and ethanolic samples of Coffea tosta using high pressure liquid chromatography (HPLC) as a method of analysis. The study wanted to expand on homoeopathic pharmaceutical knowledge, specifically looking at the two methods of remedy preparation of plant materials. From the same batch of ground roasted coffee beans, using the decimal scale of dilution, the mother tincture (bill) and the first triturated (bill) samples were prepared. The subsequent 2xH and 3xH triturated and ethanolic potencies were then made in accordance with homoeopathic methodology. Each group contained three different dilution levels (bill, 2xH and 3xH), 18 samples per group giving a total of36 samples that were analysed using HPLC. Three samples were analysed from the three dilution levels in each Group, in total there were 18 samples from the triturated group and 18 from the ethanolic group. . The samples were analysed quantitatively using the highly accurate and advanced method of high pressure liquid chromatography. This method gives accurate readings of the caffeine concentrations of a sample compared to a caffeine standard. This allowed for quantification of the caffeine concentration of each sample. The percentage caffeine was calculated from each sample. The aim of the study was to evaluate the difference in each method of preparation by measuring the amount of caffeine extracted from the samples. The results obtained from the inter-Group Mann-Whitney and ANOVA tests showed that there was a significant difference between the ethanolic dilutions and triturated dilutions with regards to the 1xH and 2xH dilutions. In the 1xH dilution the ethanolic method retained / M
|
36 |
Determination of organic compounds by high-performance liquid chromatography with conductometric detection.January 1993 (has links)
by Chuen-shing Mok. / Thesis (Ph.D.)--Chinese University of Hong Kong, 1993. / Includes bibliographical references (leaves 192-193). / Chapter Chapter 1 --- INTRODUCTION --- p.1 / Chapter Chapter 2 --- INSTRUMENTATION AND THEORY --- p.9 / Chapter Chapter 3 --- INDIRECT CONDUCTOMETRIC DETECTION OF AMINO ACIDS AFTER HIGH-PERFORMANCE LIQUID CHROMATOGRAPHIC SEPARATION --- p.17 / Chapter Chapter 4 --- DETERMINATION OF MONOSODIUM GLUTAMATE IN FOODS WITH HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY USING INDIRECT CONDUCTOMETRIC DETECTION --- p.52 / Chapter Chapter 5 --- HIGH-PERFORMANCE LIQUID CHROMATOGRAPHIC DETERMINATION OF ACTIVE INGREDIENTS IN COUGH-COLD SYRUPS WITH INDIRECT CONDUCTOMETRIC DETECTION --- p.83 / Chapter Chapter 6 --- HIGH-PERFORMANCE LIQUID CHROMATOGRAPHIC DETERMINATION OF ATROPINE AND ATROPINE- LIKE ALKALOIDS IN PHARMACEUTICAL PREPARATIONS WITH INDIRECT CONDUCTOMETRIC DETECTION --- p.144 / Chapter Chapter 7 --- CONCLUSION --- p.194
|
37 |
HPLC method development for the analysis of electroplating baths used in the electronic industry.January 2002 (has links)
Sin Wai-Chu. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2002. / Includes bibliographical references. / Abstracts in English and Chinese. / ABSTRACT --- p.i / 論文摘要 --- p.ii / ACKNOWLEDGEMENT --- p.iii / Chapter Chapter 1 --- Introduction --- p.1 / Chapter 1.1 --- Electroplating history --- p.1 / Chapter 1.2 --- Electroplating bath --- p.7 / Chapter 1.3 --- Electroplating analytical methods --- p.8 / Chapter 1.3.1 --- Metal content and elemental impurities analysis --- p.10 / Chapter 1.3.2 --- "Metal complex, inorganic anion and cation analysis" --- p.11 / Chapter 1.3.3 --- Organic brighteners and levelers analysis --- p.12 / Chapter 1.4 --- HPLC literature review --- p.15 / Chapter 1.5 --- My research work --- p.16 / Chapter 1.6 --- References for Chapter 1 --- p.19 / Chapter Chapter 2 --- General Experimental --- p.23 / Chapter 2.1 --- The HPLC System --- p.23 / Chapter 2.2 --- The factors that affect the separation --- p.26 / Chapter 2.2.1 --- The composition of the solvent system --- p.27 / Chapter 2.2.2 --- The selection of column --- p.30 / Chapter 2.2.3 --- The most suitable analytical wavelength for UV detection --- p.34 / Chapter 2.3 --- Challenges in analyzing electroplating baths solution --- p.35 / Chapter 2.3.1 --- High metal content --- p.36 / Chapter 2.3.2 --- Strong ligand or complexing agent --- p.36 / Chapter 2.3.3 --- Interference --- p.37 / Chapter 2.3.4 --- Extreme pH --- p.37 / Chapter 2.3.5 --- Other difficulties --- p.38 / Chapter 2.3.6 --- Maintenance of HPLC instrument --- p.38 / Chapter 2.4 --- References for Chapter 2 --- p.38 / Chapter Chapter 3 --- Palladure 200 bath HPLC analysis --- p.41 / Chapter 3.1 --- Introduction --- p.41 / Chapter 3.2 --- Experimental --- p.43 / Chapter 3.3 --- Problems in the existing UV analysis for monitoring Palladure200 process --- p.45 / Chapter 3.4 --- HPLC method development for monitoring Palladure 200 process --- p.49 / Chapter 3.5 --- Analysis of aged Palladure 200 plating bath from production line --- p.55 / Chapter 3.6 --- Conclusion --- p.57 / Chapter 3.7 --- References for Chapter 3 --- p.58 / Chapter Chapter 4 --- Nickel PC3 bath HPLC analysis --- p.59 / Chapter 4.1 --- Introduction --- p.59 / Chapter 4.2 --- Experimental --- p.60 / Chapter 4.3 --- Problems in the existing Titration method for monitoring Nickel PC3 process --- p.62 / Chapter 4.4 --- HPLC method development for monitoring Nickel PC3 process --- p.63 / Chapter 4.4.1 --- Identify individual component of Nickel PC3 process --- p.63 / Chapter 4.4.2 --- Set up a calibration curve for the Nickel PC3 Additive --- p.67 / Chapter 4.4.3 --- Analysis of aged Nickel PC3 plating bath from production line --- p.68 / Chapter 4.5 --- Conclusion --- p.71 / Chapter 4.6 --- References for Chapter 4 --- p.72 / Chapter Chapter 5 --- Solderon SC bath HPLC analysis --- p.73 / Chapter 5.1 --- Introduction --- p.73 / Chapter 5.2 --- Experimental --- p.74 / Chapter 5.3 --- Instability in the existing Cyclic Voltammetric Stripping (CVS) method for monitoring Solderon SC process --- p.76 / Chapter 5.4 --- HPLC method development for monitoring Solderon SC process --- p.77 / Chapter 5.4.1 --- Identify the individual components --- p.77 / Chapter 5.4.2 --- Set up a calibration curve for the Solderon SC Primary --- p.82 / Chapter 5.4.3 --- Analysis of aged Solderon SC plating bath from production line --- p.84 / Chapter 5.5 --- Conclusion --- p.86 / Chapter 5.6 --- References for Chapter 5 --- p.86 / Chapter Chapter 6 --- Copper Gleam PPR bath HPLC analysis --- p.87 / Chapter 6.1 --- Introduction --- p.87 / Chapter 6.2 --- Experimental --- p.89 / Chapter 6.3 --- Problems in the existing Cyclic Voltammetric Stripping (CVS) method for monitoring Copper Gleam PPR process --- p.91 / Chapter 6.4 --- HPLC method development for monitoring Copper Gleam PPR process --- p.92 / Chapter 6.4.1 --- Identify Individual components and copper PPR additivein standard bath --- p.92 / Chapter 6.4.2 --- Set up a calibration curve for the Copper Gleam PPR Additive --- p.95 / Chapter 6.4.3 --- Analysis of aged Copper Gleam PPR plating bath from production line --- p.96 / Chapter 6.4.5 --- Study of H202 effect --- p.101 / Chapter 6.4.6 --- Study of air agitation effect --- p.104 / Chapter 6.4.7 --- Study of Copper anode effect --- p.105 / Chapter 6.5 --- Conclusion --- p.107 / Chapter 6.6 --- References for Chapter 6 --- p.107 / Chapter Chapter 7 --- Silverjet220 bath HPLC analysis --- p.109 / Chapter 7.1 --- Introduction --- p.109 / Chapter 7.2 --- Experimental --- p.110 / Chapter 7.3 --- HPLC method development for monitoring Silverjet 220 process --- p.112 / Chapter 7.3.1 --- Identify individual components and Silverjet 220 Additive in the plating bath --- p.112 / Chapter 7.3.2 --- Optimize the condition for HPLC analysis --- p.117 / Chapter 7.3.3 --- Analysis of aged Silverjet 220 plating bath from production line --- p.119 / Chapter 7.4 --- Conclusion --- p.122 / Chapter 7.5 --- References for Chapter 7 --- p.123 / Chapter Chapter 8 --- Conclusions and Further Studies --- p.124 / Chapter 8.1 --- Conclusions --- p.124 / Chapter 8.2 --- Further Studies --- p.126 / APPENDIX --- p.128 / The User guide for HPLC --- p.128 / HPLC System Calibration Maintenance --- p.135 / HPLC System Preventive Maintenance --- p.145
|
38 |
Studies of flow injection system for micelle-assisted preconcentration of PAHs coupled with HPLCLi, Cheuk Fai 01 January 2009 (has links)
No description available.
|
39 |
營實HPLC指紋圖譜研究初探張雅茗, 01 January 2013 (has links)
No description available.
|
40 |
Selenium speciation by high performance liquid chromatography -atomic absorption spectrometryLei, Tian January 1994 (has links)
No description available.
|
Page generated in 0.1222 seconds