Spelling suggestions: "subject:"figher order statistics"" "subject:"eigher order statistics""
11 |
Online Calibration Of Sensor Arrays Using Higher Order StatisticsAktas, Metin 01 February 2012 (has links) (PDF)
Higher Order Statistics (HOS) and Second Order Statistics (SOS) approaches have certain advantages and disadvantages in signal processing applications. HOS approach provides more statistical information for non-Gaussian signals. On the other hand, SOS approach is more robust to the estimation errors than the HOS approach, especially when the number of observations is small. In this thesis, HOS and SOS approaches are jointly used in order to take advantage of both methods. In this respect, the joint use of HOS and SOS approaches are introduced for online calibration of sensor arrays with arbitrary geometries. Three different problems in online array calibration are considered and new algorithms for each of these problems are proposed. In the first problem, the positions of the randomly deployed sensors are completely unknown except the two reference sensors and HOS and SOS approaches are used iteratively for the joint Direction of Arrival (DOA) and sensor position estimation. Iterative HOS-SOS algorithm (IHOSS) solves the ambiguity problem in sensor position estimation by observing the source signals at least in two different frequencies and hence it is applicable for wideband signals. The conditions on these frequencies are presented. IHOSS is the first algorithm in the literature which finds the DOA and sensor position estimations in case of randomly deployed sensors with unknown coordinates. In the second problem, narrowband signals are considered and it is assumed that the nominal sensor positions are known. Modified IHOSS (MIHOSS) algorithm uses the nominal sensor positions to solve the ambiguity problem in sensor position estimation. This algorithm can handle both small and large errors in sensor positions. The upper bound of perturbations for unambiguous sensor position estimation is presented. In the last problem, an online array calibration method is proposed for sensor arrays where the sensors have unknown gain/phase mismatches and mutual coupling coefficients. In this case, sensor positions are assumed to be known. The mutual coupling matrix is unstructured. The two reference sensors are assumed to be perfectly calibrated. IHOSS algorithm is adapted for online calibration and parameter estimation, and hence CIHOSS algorithm is obtained. While CIHOSS originates from IHOSS, it is fundamentally different in many aspects. CIHOSS uses multiple virtual ESPRIT structures and employs an alignment technique to order the elements of rows of the actual array steering matrix. In this thesis, a new cumulant matrix estimation technique is proposed for the HOS approach by converting the multi-source problem into a single source one. The proposed algorithms perform well even in the case of correlated source signals due to the effectiveness of the proposed cumulant matrix estimate. The iterative procedure in all the proposed algorithms is guaranteed to converge. Closed form expressions are derived for the deterministic Cram´ / er-Rao bound (CRB) for DOA and unknown calibration parameters for non-circular complex Gaussian noise with unknown covariance matrix. Simulation results show that the performances of the proposed methods approach to the CRB for both DOA and unknown calibration parameter estimations for high SNR.
|
12 |
Analysis of Snore Sound Pitch and Total Airway Response in Obstructive Sleep Apnoea Hypopnoea DetectionAsela S Karunajeewa Unknown Date (has links)
Obstructive sleep apnoea hypopnoea syndrome (OSAHS) is a highly prevalent disease in which upper airways are collapsed during sleep, leading to serious consequences. The reference standard of clinical diagnosis, called Polysomnography (PSG), requires a full-night hospital stay connected to over 15 measuring channels requiring physical contact with sensors. The vast quantity of physiological data acquired during the PSG has to be manually scored by a qualified technologist to assess the presence or absence of the decease. The PSG is inconvenient, time consuming, expensive and unsuited for community screening. The limited PSG facilities around the world have resulted in long waiting lists and a large fraction of patients remain undiagnosed at present. There has been a flurry of recent activities in developing a portable technology to resolve this need. All the devices have at least one sensor that requires physical contact with the subject. Unattended systems have not led to sufficiently high sensitivity/specificity levels to be used in a routine home monitoring or a community screening exercise. OSAHS is a sleep respiratory disorder principally caused by functional deficiencies occurring in the upper airways during sleep. These conditions and the reduced muscle tone during sleep, cause the muscles in the upper airways to collapse partially or completely thus resulting in episodes of hypopnoea and apnoea respectively. During the process leading to collapse of upper airways, upper airways act as an acoustic filter frequently producing snoring sounds. The process of snore sound production leads us to hypothesise that snore sounds should contain information on changes occurring in the upper airways during the OSAHS. Snoring almost always accompanies the OSAHS and is universally recognised as its earliest symptom. At present, however, the quantitative analysis of snore sounds is not a practice in clinical OSAHS detection. The vast potential of snoring in the diagnosis/screening of the OSAHS remains unused. Snoring-based technology opens up opportunities for building community-screening devices that do not depend on contact instrumentation. In this thesis, we present our work towards developing a snore–based non-contact instrumentation for the diagnosis/screening of the OSAHS. The primary task in the analysis of Snore Related Sounds (SRS) would be to segment the SRS data as accurately as possible into three main classes, snoring (voiced non-silence), breathing (unvoiced non-silence) and silence. A new algorithm was developed, based on pattern recognition for the SRS segmentation. Four features derived from the SRS were considered to classify samples of the SRS into three classes. We also investigated the performance of the algorithm with three commonly-used noise reduction (NR) techniques in speech processing, Amplitude Spectral Subtraction (ASS), Power Spectral Subtraction (PSS) and Short Time Spectral Amplitude (STSA) Estimation. It was found that the noise reduction, together with a proper choice of features, could improve the classification accuracy to 96.78%. A novel model for the SRS was proposed for the response of a mixed-phase system (total airways response, TAR) to a source excitation at the input. The TAR/source model is similar to the vocal tract/source model in speech synthesis and is capable of capturing the acoustical changes brought about by the collapsing upper airways in the OSAHS. An algorithm was developed, based on the higher-order-spectra (HOS) to jointly estimate the source and the TAR, preserving the true phase characteristics of the latter. Working on a clinical database of signals, we show that the TAR is indeed a mixed phased signal and second-order statistics cannot fully characterise it. Nocturnal speech sounds can corrupt snore recordings and pose a challenge to the snore-based OSAHS diagnosis. The TAR could be shown to detect speech segments embedded in snores and derive features to diagnose the OSAHS. Finally presented is a novel technique for diagnosing the OSAHS, based solely on multi-parametric snore sound analysis. The method comprises a logistic regression model fed with a range of snore parameters derived from its features — the pitch and Total Airways Response (TAR) estimated using a Higher Order Statistics (HOS) based algorithm. The model was developed and its performance validated on a clinical database consisting of overnight snoring sounds simultaneously recorded during a hospital PSG using a high fidelity sound recording setup. The K-fold cross validation technique was used for validating the model. The validation process achieved an 89.3% sensitivity with 92.3% specificity (the area under the Receiver Operating Characteristic (ROC) curve was 0.96) in classifying the data sets into the two groups, the OSAHS (AHI >10) and the non-OSAHS. These results are superior to the existing results and unequivocally illustrate the feasibility of developing a snore-based non-contact OSAHS screening device.
|
13 |
Analysis of Snore Sound Pitch and Total Airway Response in Obstructive Sleep Apnoea Hypopnoea DetectionAsela S Karunajeewa Unknown Date (has links)
Obstructive sleep apnoea hypopnoea syndrome (OSAHS) is a highly prevalent disease in which upper airways are collapsed during sleep, leading to serious consequences. The reference standard of clinical diagnosis, called Polysomnography (PSG), requires a full-night hospital stay connected to over 15 measuring channels requiring physical contact with sensors. The vast quantity of physiological data acquired during the PSG has to be manually scored by a qualified technologist to assess the presence or absence of the decease. The PSG is inconvenient, time consuming, expensive and unsuited for community screening. The limited PSG facilities around the world have resulted in long waiting lists and a large fraction of patients remain undiagnosed at present. There has been a flurry of recent activities in developing a portable technology to resolve this need. All the devices have at least one sensor that requires physical contact with the subject. Unattended systems have not led to sufficiently high sensitivity/specificity levels to be used in a routine home monitoring or a community screening exercise. OSAHS is a sleep respiratory disorder principally caused by functional deficiencies occurring in the upper airways during sleep. These conditions and the reduced muscle tone during sleep, cause the muscles in the upper airways to collapse partially or completely thus resulting in episodes of hypopnoea and apnoea respectively. During the process leading to collapse of upper airways, upper airways act as an acoustic filter frequently producing snoring sounds. The process of snore sound production leads us to hypothesise that snore sounds should contain information on changes occurring in the upper airways during the OSAHS. Snoring almost always accompanies the OSAHS and is universally recognised as its earliest symptom. At present, however, the quantitative analysis of snore sounds is not a practice in clinical OSAHS detection. The vast potential of snoring in the diagnosis/screening of the OSAHS remains unused. Snoring-based technology opens up opportunities for building community-screening devices that do not depend on contact instrumentation. In this thesis, we present our work towards developing a snore–based non-contact instrumentation for the diagnosis/screening of the OSAHS. The primary task in the analysis of Snore Related Sounds (SRS) would be to segment the SRS data as accurately as possible into three main classes, snoring (voiced non-silence), breathing (unvoiced non-silence) and silence. A new algorithm was developed, based on pattern recognition for the SRS segmentation. Four features derived from the SRS were considered to classify samples of the SRS into three classes. We also investigated the performance of the algorithm with three commonly-used noise reduction (NR) techniques in speech processing, Amplitude Spectral Subtraction (ASS), Power Spectral Subtraction (PSS) and Short Time Spectral Amplitude (STSA) Estimation. It was found that the noise reduction, together with a proper choice of features, could improve the classification accuracy to 96.78%. A novel model for the SRS was proposed for the response of a mixed-phase system (total airways response, TAR) to a source excitation at the input. The TAR/source model is similar to the vocal tract/source model in speech synthesis and is capable of capturing the acoustical changes brought about by the collapsing upper airways in the OSAHS. An algorithm was developed, based on the higher-order-spectra (HOS) to jointly estimate the source and the TAR, preserving the true phase characteristics of the latter. Working on a clinical database of signals, we show that the TAR is indeed a mixed phased signal and second-order statistics cannot fully characterise it. Nocturnal speech sounds can corrupt snore recordings and pose a challenge to the snore-based OSAHS diagnosis. The TAR could be shown to detect speech segments embedded in snores and derive features to diagnose the OSAHS. Finally presented is a novel technique for diagnosing the OSAHS, based solely on multi-parametric snore sound analysis. The method comprises a logistic regression model fed with a range of snore parameters derived from its features — the pitch and Total Airways Response (TAR) estimated using a Higher Order Statistics (HOS) based algorithm. The model was developed and its performance validated on a clinical database consisting of overnight snoring sounds simultaneously recorded during a hospital PSG using a high fidelity sound recording setup. The K-fold cross validation technique was used for validating the model. The validation process achieved an 89.3% sensitivity with 92.3% specificity (the area under the Receiver Operating Characteristic (ROC) curve was 0.96) in classifying the data sets into the two groups, the OSAHS (AHI >10) and the non-OSAHS. These results are superior to the existing results and unequivocally illustrate the feasibility of developing a snore-based non-contact OSAHS screening device.
|
14 |
Sobre separação cega de fontes : proposições e analise de estrategias para processamento multi-usuarioCavalcante, Charles Casimiro 30 April 2004 (has links)
Orientadores: João Marcos Travassos Romano, Francisco Rodrigo Porto Cavalcanti / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação / Made available in DSpace on 2018-08-04T00:19:46Z (GMT). No. of bitstreams: 1
Cavalcante_CharlesCasimiro_D.pdf: 8652621 bytes, checksum: bf432c4988b60a8e2465828f4f748b47 (MD5)
Previous issue date: 2004 / Resumo: Esta tese é dedicada ao estudo de tecnicas de separação cega de fontes aplicadas ao contexto de processamento multiusuario em comunicações digitais. Utilizando estrategias de estimação da função de densidade de probabilidade (fdp), são propostos dois metodos de
processamento multiusuario que permitem recuperar os sinais transmitidos pela medida de similaridade de Kullback-Leibler entre a fdp dos sinais a saida do dispositivo de separação e um modelo parametrico que contem as caracteristicas dos sinais transmitidos. Alem desta medida de similaridade, são empregados diferentes metodos que garantem a descorrelação
entre as estimativas das fontes de tal forma que os sinais recuperados sejam provenientes de diferentes fontes. E ainda realizada a analise de convergencia dos metodos e suas equivalencias com tecnicas classicas resultando em algumas importantes relações entre criterios cegos e
supervisionados, tais como o criterio proposto e o criterio de maxima a posteriori. Estes novos metodos aliam a capacidade de recuperação da informação uma baixa complexidade computacional. A proposição de metodos baseados na estimativa da fdp permitiu a realização de um estudo sobre o impacto das estatisticas de ordem superior em algoritmos adaptativos para separação cega de fontes. A utilização da expansão da fdp em series ortonormais permite avaliar atraves dos cumulantes a dinamica de um processo de separação de fontes. Para tratar com problemas de comunicação digital e proposta uma nova serie ortonormal, desenvolvida em torno de uma função de densidade de probabilidade dada por um somatorio de gaussianas. Esta serie e utilizada para evidenciar as diferenças em relação ao desempenho em tempo real ao se reter mais estatisticas de ordem superior. Simulações computacionais são realizadas para evidenciar o desempenho das propostas frente a tecnicas conhecidas da literatura em varias situações de necessidade de alguma estrategia de recuperação de sinais / Abstract: This thesis is devoted to study blind source separation techniques applied to multiuser processing in digital communications. Using probability density function (pdf) estimation strategies, two multiuser processing methods are proposed. They aim for recovering transmitted signal by using the Kullback-Leibler similarity measure between the signals pdf and a parametric model that contains the signals characteristics. Besides the similarity measure, different methods are employed to guarantee the decorrelation of the sources estimates, providing that the recovered signals origin from different sources. The convergence analysis of the methods as well as their equivalences with classical techniques are presented,
resulting on important relationships between blind and supervised criteria such as the proposal and the maximum a posteriori one. Those new methods have a good trade-off between the recovering ability and computational complexity. The proposal os pdf estimation-based methods had allowed the investigation on the impact of higher order statistics on adaptive
algorithms for blind source separation. Using pdf orthonormal series expansion we are able to evaluate through cumulants the dynamics of a source separation process. To be able to deal with digital communication signals, a new orthonormal series expansion is proposed. Such expansion is developed in terms of a Gaussian mixture pdf. This new expansion is used to evaluate the differences in real time processing when we retain more higher order statistics. Computational simulations are carried out to stress the performance of the proposals, faced to well known techniques reported in the literature, under the situations where a recovering signal strategy is required. / Doutorado / Telecomunicações e Telemática / Doutor em Engenharia Elétrica
|
15 |
Identification de systèmes par modèle non entier à partir de signaux d'entrée sortie bruités / Systems identification with fractional models using noisy input output dataChetoui, Manel 18 December 2013 (has links)
Les principales contributions de cette thèse concernent l'identification à temps continu des systèmes par modèles non entiers dans un contexte à erreurs en les variables. Deux classes de méthodes sont développées : la première classe est fondée sur les statistiques d'ordre trois et la deuxième est fondée sur les statistiques d'ordre quatre. Dans chaque classe, deux cas différents sont distingués : le premier cas suppose que tous les ordres de dérivation non entiers sont connus a priori et seuls les coefficients de l'équation différentielle non entière sont estimés en utilisant les estimateurs fondés sur les statistiques d'ordre supérieur. Le deuxième cas suppose que les ordres de dérivation sont commensurables à un ordre nu estimé au même titre que les coefficients de l'équation différentielle non entière par des techniques d'optimisation non linéaire combinées aux estimateurs fondés sur les cumulants d'ordre trois et quatre. Des exemples de simulation numérique illustrent les développements théoriques. Des applications pratiques sur la modélisation du phénomène de diffusion de chaleur dans un barreau d'Aluminium et sur la modélisation d'un système électronique ont montré la pertinence des méthodes développées. / This thesis deals with continuous-time system identification by fractional models in the EIV context. Two classes of methods are developed : the first class is based on third-order statistics and the second one is based on fourth-order statistics. Firstly, all differentiation orders are known a priori and only the coefficients of the differential equation are estimated using the developed algorithms based on higher-order statistics. Then, they are extended to estimate both the fractional differential equation coefficients and the commensurate order. Simulation examples display the theoretical developments on system identification in the EIV context. A practical application for modeling heat transfer phenomena in an aluminium rod and for modeling an electronic real system have shown the efficiency of the developed methods.
|
16 |
Scheduling, spectrum sensing and cooperation in MU-MIMO broadcast and cognitive radio systemsJin, Lina January 2012 (has links)
In this thesis we investigate how to improve the performance of MU-MIMO wireless system in terms of achieving Shannon capacity limit and efficient use of precious resource of radio spectrum in wireless communication. First a new suboptimal volume-based scheduling algorithm is presented, which can be applied in MU-MIMO downlink system to transmit signals concurrently to multiple users under the assumption of perfect channel information at transmitter and receiver. The volume-based scheduling algorithm utilises Block Diagonalisation precoding and Householder reduction procedure of QR factorisation. In comparison with capacity-based suboptimal scheduling algorithm, the volume-based algorithm has much reduced computational complexity with only a fraction of sum-rate capacity penalty from the upper bound of system capacity limit. In comparison with semi-orthogonal user selection suboptimal scheduling algorithm, the volume-based scheduling algorithm can be implemented with less computational complexity. Furthermore, the sum-rate capacity achieved via volume-based scheduling algorithm is higher than that achieved by SUS scheduling algorithm in the MIMO case. Then, a two-step scheduling algorithm is proposed, which can be used in the MU-MIMO system and under the assumption that channel state information is known to the receiver, but it is not known to the transmitter and the system under the feedback resource constraint. Assume that low bits codebook and high bits codebook are stored at the transmitter and receiver. The users are selected by using the low bits codebook; subsequently the BD precoding vectors for selected users are designed by employing high bits codebook. The first step of the algorithm can alleviate the load on feedback uplink channel in the MU-MIMO wireless system while the second step can aid precoding design to improve system sum-rate capacity. Next, a MU-MIMO cognitive radio (CR) wireless system has been studied. In such system, a primary wireless network and secondary wireless network coexist and the transmitters and receivers are equipped with multiple antennas. Spectrum sensing methods by which a portion of spectrum can be utilised by a secondary user when the spectrum is detected not in use by a primary user were investigated. A Free Probability Theory (FPT) spectrum sensing method that is a blind spectrum sensing method is proposed. By utilizing the asymptotic behaviour of random matrix based on FPT, the covariance matrix of transmitted signals can be estimated through a large number of observations of the received signals. The method performs better than traditional energy spectrum sensing method. We also consider cooperative spectrum sensing by using the FPT method in MU-MIMO CR system. Cooperative spectrum sensing can improve the performance of signal detection. Furthermore, with the selective cooperative spectrum sensing approach, high probability of detection can be achieved when the system is under false alarm constraint. Finally, spectrum sensing method based on the bispectrum of high-order statistics (HOS) and receive diversity in SIMO CR system is proposed. Multiple antennas on the receiver can improve received SNR value and therefore enhance spectrum sensing performance in terms of increase of system-level probability of detection. Discussions on cooperative spectrum sensing by using the spectrum sensing method based on HOS and receive diversity are presented.
|
17 |
Análise de componentes independentes aplicada à separação de sinais de áudio. / Independent component analysis applied to separation of audio signals.Moreto, Fernando Alves de Lima 19 March 2008 (has links)
Este trabalho estuda o modelo de análise em componentes independentes (ICA) para misturas instantâneas, aplicado na separação de sinais de áudio. Três algoritmos de separação de misturas instantâneas são avaliados: FastICA, PP (Projection Pursuit) e PearsonICA; possuindo dois princípios básicos em comum: as fontes devem ser independentes estatisticamente e não-Gaussianas. Para analisar a capacidade de separação dos algoritmos foram realizados dois grupos de experimentos. No primeiro grupo foram geradas misturas instantâneas, sinteticamente, a partir de sinais de áudio pré-definidos. Além disso, foram geradas misturas instantâneas a partir de sinais com características específicas, também geradas sinteticamente, para avaliar o comportamento dos algoritmos em situações específicas. Para o segundo grupo foram geradas misturas convolutivas no laboratório de acústica do LPS. Foi proposto o algoritmo PP, baseado no método de Busca de Projeções comumente usado em sistemas de exploração e classificação, para separação de múltiplas fontes como alternativa ao modelo ICA. Embora o método PP proposto possa ser utilizado para separação de fontes, ele não pode ser considerado um método ICA e não é garantida a extração das fontes. Finalmente, os experimentos validam os algoritmos estudados. / This work studies Independent Component Analysis (ICA) for instantaneous mixtures, applied to audio signal (source) separation. Three instantaneous mixture separation algorithms are considered: FastICA, PP (Projection Pursuit) and PearsonICA, presenting two common basic principles: sources must be statistically independent and non-Gaussian. In order to analyze each algorithm separation capability, two groups of experiments were carried out. In the first group, instantaneous mixtures were generated synthetically from predefined audio signals. Moreover, instantaneous mixtures were generated from specific signal generated with special features, synthetically, enabling the behavior analysis of the algorithms. In the second group, convolutive mixtures were probed in the acoustics laboratory of LPS at EPUSP. The PP algorithm is proposed, based on the Projection Pursuit technique usually applied in exploratory and clustering environments, for separation of multiple sources as an alternative to conventional ICA. Although the PP algorithm proposed could be applied to separate sources, it couldnt be considered an ICA method, and source extraction is not guaranteed. Finally, experiments validate the studied algorithms.
|
18 |
Vibration Signal Features for the Quantification of Prosthetic Loosening in Total Hip ArthroplastiesStevenson, Nathan January 2003 (has links)
This project attempts to quantify the integrity of the fixation of total hip arthro- T plasties (THAs) by observing vibration signal features. The aim of this thesis is, therefore, to find the signal differences between firm and loose prosthesis. These difference will be expressed in different transformed domains with the expectation that a certain domain will provide superior results. Once the signal differences have been determined they will be examined for their ability to quantify the looseness. Initially, a new definition of progressive, femoral component loosening was created, based on the application of mechanical fit, involving four general conditions. In order of increasing looseness the conditions (with their equivalent engineering associations) are listed as, firm (adherence), firm (interference), micro-loose (transition) and macro-loose (clearance). These conditions were then used to aid in the development and evaluation of a simple mathematical model based on an ordinary differential equation. Several possible parameters well suited to quantification such as gap displacement, cement/interface stiffness and apparent mass were the identified from the model. In addition, the development of this model provided a solution to the problem of unifying early and late loosening mentioned in the literature by Li et al. in 1995 and 1996. This unification permitted early (micro loose) and late (macro loose) loosening to be quantified, if necessary, with the same parameter. The quantification problem was posed as a detection problem by utilising a varying amplitude input. A set of detection techniques were developed to detect the quantity of a critical value, in this case a force. The detection techniques include deviation measures of the instantaneous frequency of the impulse response of the system (accuracy of 100%), linearity of the systems response to Gaussian input (total accuracy of 97.9% over all realisations) and observed resonant frequency linearity with respect to displacement magnitude (accuracy of 100%). Note, that as these techniques were developed with the model in mind their simulated performance was, therefore, considerably high. This critical value found by the detector was then fed into the model and a quantified output was calculated. The quantification techniques using the critical value approach include, ramped amplitude input resonant analysis (experimental accuracy of 94%) and ramped amplitude input stochastic analysis (experimental accuracy of 90%). These techniques were based on analysing the response of the system in the time-frequency domain and with respect to its short-time statistical moments to a ramping amplitude input force, respectively. In addition, other mechanically sound forms of analysis, were then applied to the output of the nonlinear model with the aim of quantifying the looseness or the integrity of fixation of the THA. The cement/interface stiffness and apparent mass techniques, inspired by the work of Chung et.al. in 1979, attempt to assess the integrity of fixation of the THA by tracking the mechanical behaviour of the components of the THA, using the frequency and magnitude of the raw transducer data. This technique has been developed fron the theory of Chung etal but with a differing perspective and provides accuracies of 82% in experimentation and 71% in simulation for the apparent mass and interface stiffness techniques, respectively. Theses techniques do not quantify all forms of clinical loosening, as clinical loosening can exist in many different forms, but they do quantify mechanical loosening or the mechanical functionality of the femoral component through related parameters that observe reduction in mechanical mass, stiffness and the amount of rattle generated by a select ghap betweent he bone/cement or prosthesis/cement interface. This form of mechanical loosening in currently extremely difficult to detect using radiographs. It is envisaged that a vibration test be used in conjunction with radiographs to provide a more complete picture of the integrity of fixation of the THA.
|
19 |
Análise de componentes independentes aplicada à separação de sinais de áudio. / Independent component analysis applied to separation of audio signals.Fernando Alves de Lima Moreto 19 March 2008 (has links)
Este trabalho estuda o modelo de análise em componentes independentes (ICA) para misturas instantâneas, aplicado na separação de sinais de áudio. Três algoritmos de separação de misturas instantâneas são avaliados: FastICA, PP (Projection Pursuit) e PearsonICA; possuindo dois princípios básicos em comum: as fontes devem ser independentes estatisticamente e não-Gaussianas. Para analisar a capacidade de separação dos algoritmos foram realizados dois grupos de experimentos. No primeiro grupo foram geradas misturas instantâneas, sinteticamente, a partir de sinais de áudio pré-definidos. Além disso, foram geradas misturas instantâneas a partir de sinais com características específicas, também geradas sinteticamente, para avaliar o comportamento dos algoritmos em situações específicas. Para o segundo grupo foram geradas misturas convolutivas no laboratório de acústica do LPS. Foi proposto o algoritmo PP, baseado no método de Busca de Projeções comumente usado em sistemas de exploração e classificação, para separação de múltiplas fontes como alternativa ao modelo ICA. Embora o método PP proposto possa ser utilizado para separação de fontes, ele não pode ser considerado um método ICA e não é garantida a extração das fontes. Finalmente, os experimentos validam os algoritmos estudados. / This work studies Independent Component Analysis (ICA) for instantaneous mixtures, applied to audio signal (source) separation. Three instantaneous mixture separation algorithms are considered: FastICA, PP (Projection Pursuit) and PearsonICA, presenting two common basic principles: sources must be statistically independent and non-Gaussian. In order to analyze each algorithm separation capability, two groups of experiments were carried out. In the first group, instantaneous mixtures were generated synthetically from predefined audio signals. Moreover, instantaneous mixtures were generated from specific signal generated with special features, synthetically, enabling the behavior analysis of the algorithms. In the second group, convolutive mixtures were probed in the acoustics laboratory of LPS at EPUSP. The PP algorithm is proposed, based on the Projection Pursuit technique usually applied in exploratory and clustering environments, for separation of multiple sources as an alternative to conventional ICA. Although the PP algorithm proposed could be applied to separate sources, it couldnt be considered an ICA method, and source extraction is not guaranteed. Finally, experiments validate the studied algorithms.
|
20 |
Uma contribuição à análise de técnicas de monitoramento de espectro para sistemas PLCAmado, Laryssa Ramos 29 August 2011 (has links)
Submitted by Renata Lopes (renatasil82@gmail.com) on 2017-04-20T18:23:07Z
No. of bitstreams: 1
laryssaramosamado.pdf: 2344885 bytes, checksum: 4328135ddbd0305fc11aa0bf0f8f8b61 (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2017-04-24T16:50:29Z (GMT) No. of bitstreams: 1
laryssaramosamado.pdf: 2344885 bytes, checksum: 4328135ddbd0305fc11aa0bf0f8f8b61 (MD5) / Made available in DSpace on 2017-04-24T16:50:29Z (GMT). No. of bitstreams: 1
laryssaramosamado.pdf: 2344885 bytes, checksum: 4328135ddbd0305fc11aa0bf0f8f8b61 (MD5)
Previous issue date: 2011-08-29 / CNPq - Conselho Nacional de Desenvolvimento Científico e Tecnológico / A presente dissertação tem como objetivos principais a discussão e a análise do uso de técnicas de monitoramento de espectro aplicadas a sistemas PLC, para que a ocupação deste espectro seja explicitada. Neste contexto, diversas técnicas de processamento de sinais e inteligência computacional são utilizadas para extrair e selecionar o menor número de características que sejam mais representativas para detecção, a fim de projetar o melhor e menos complexo detector de sinais a ser utilizado inicialmente na faixa de frequência entre 1,705 e 100 MHz, mas que permita futuras modificações para aplicações na faixa entre 1,705 e 250 MHz. Além disso, o problema de monitoramento de espectro para sistemas PLC é formalizado, e questões de investigação são analisadas tanto para dados simulados em MATLAB quanto para dados medidos em campo. O processo de medição destes dados é descrito e suas características são explicitadas. Finalmente, a análise dos resultados obtidos indica a adequabilidade das técnicas aplicadas ao problema em questão, porém indicam necessidade do aprofundamento desta investigação. Desta maneira, este trabalho consiste em um estudo inicial sobre importantes questões pertinentes ao monitoramento de espectro de sistemas PLC. / This master thesis aims to discuss and analyze the use of spectrum sensing techniques applied to PLC systems, in order to explicit the spectrum occupation. These techniques extract and select the least quantity of the most representative signal features in order to project the best detector that presents the lowest computational complexity. In addition to that, the spectrum sensing problem is formalized, and a few investigation questions are analyzed for both synthetic and measured data. The measurement of PLC signals and their characterization is also exposed. Although the analysis of the attained results indicate that the techniques used are suitable for the examined problems, their further investigation is necessary, in order to better understand the PLC environment and the spectrum sensing issues related to it. This work is, therefore, an initial study about the mentioned matters.
|
Page generated in 0.163 seconds