The paper describes the comparison and the difference of modern hydraulic fluids compared to conventional hydraulic fluids. A comparison of different base oil groups, solvent neutrals, group I and comparison with hydrotreated/hydroprocessed group II and/or group III base oils is presented. The influence on oxidation stability, elastomer compatibility, carbon distribution and physical properties is outlined.

Oil Jet Cavitation Peening in Air (OPA) is capable of inducing compressive residual stress in standard aerospace materials. This paper demonstrates the process capabilities of OPA on Al 2024-T3. Specifically, changes in the workpiece residual stress, microhardness, mass loss and surface roughness are investigated as a function of the control parameters for the system. Additionally, the paper identifies a method to monitor the process in situ through the use of high frequency acoustic emission sensors. The results indicate the OPA process is capable of generating residual stresses comparable to those of standard shot peening, up to 60% of the yield strength of the material, at similar depths, around 300 µm. Finally, the acoustic emission signal may be utilized to monitor the process, specifically in predicting the microhardness and mass loss of the system.

The paper describes the comparison and the difference of modern hydraulic fluids compared to conventional hydraulic fluids. A comparison of different base oil groups, solvent neutrals, group I and comparison with hydrotreated/hydroprocessed group II and/or group III base oils is presented. The influence on oxidation stability, elastomer compatibility, carbon distribution and physical properties is outlined.

The thesis deals with the problem of large-capacity manipulation of large forgings with forging manipulator. It describes current techniques, their characteristics, advantages and disadvantages. Based on the analysis of these techniques, the thesis introduces design of the connection of the hydraulic circuit for the drive of the traveling traction wheels of the forging manipulator QKK 100 by ŽĎAS a.s. focusing on simplicity, trouble-free operation, efficiency, economy, change of speed and torque, and possibility of modification according to the current load.