The objective of this study is to provide a better understanding of suffusion characteristics of glacial soils and to present a simple yet reliable assessment procedure for determination of suffusion in the laboratory.Internal erosion by suffusion occurs in the core of an embankment dam when the ability of the soil to resist seepage forces is exceeded and voids are large enough to allow the transport of fine particles through the pores. Soils susceptible to suffusion are described as internally unstable. dams with core of broadly graded glacial moraines (tills) exhibit signs of internal erosion to a larger extent than dams constructed with other types of materials.The Suffusion behavior of glacial soils has been investigated through two different permeameter suffusion test have been employed, small scale permeameter and big scale permeameter. Details of the equipment along with its calibration, testing and sampling procedures are provided.The testing program were performed 9 test with different compaction degree in small scale permeameter and 2 test in big permeameter on internally stable categories of till soil. The categories are defined based on the soil grain size distribution and according to the methods developed by Kenney & Lau and Burenkova.Layers are identified with suffusion if the post-test gradation curve exhibit changes in distribution compared to the initial condition and also the tests revealed that the effect of grain size distribution and relative degree of compaction on the internal erosion susceptibility of glacial till soils at different hydraulic gradients

No description available.

Shallow groundwater flow in the critical zone of steep headwater mountain catchments is often assumed to mimic surface topography. However, groundwater flow is influenced by other variables, such as the elevation of the water table and subsurface hydraulic conductivity, which can result in temporal variations in both magnitude and direction of flow. In this study, I investigated the temporal variability of groundwater flow in the soil zone (solum) within the critical zone of a headwater catchment at the Hubbard Brook Experimental Forest in North Woodstock, NH. Groundwater levels were continuously monitored throughout several seasons (March 2019 to Jan 2020) in a network of wells comprising three hillslope transects within the upper hillslopes of the catchment. Five clusters of three wells per cluster were screened from 0.18 – 1.1 m depth at the base of the solum. Water levels were also monitored in five deeper wells, screened from 2.4 - 6.9 m depth within glacial sediments of the C horizon. I conducted 47 slug tests across the well network to determine hydraulic properties of the aquifer materials surrounding each well. In addition, our team conducted a large-scale auger investigation mapping soil horizon depths and thicknesses. Results show that the magnitude of hydraulic gradients and subsurface hydrologic fluxes varied at each site with respect to changing water-table elevation, having a maximum range of 0.12 m/m and 9.19 x 10-6 m/s, respectively. The direction of groundwater flow had an arithmetic mean deviating from surface topography by 2-10 degrees, and a total range that deviated from surface topography by as much as 51 degrees. During lower water table regimes, groundwater flow direction deviated from the ground surface, but under higher water table regimes, in response to recharge events, flow direction mimicked surface topography. Within most of the well clusters, there is an observable connection between the slope direction of the top of the C horizon and the direction of groundwater flow during lower water table regimes. Slug test results show the interquartile range of saturated hydraulic conductivity (Ksat) within the C horizon (1.5×10-7 to 9.8×10-7 m/s) is two orders of magnitude lower than the interquartile range of Ksat values within the solum (2.9×10-5 to 5.2×10-5 m/s). Thus, the C horizon is on average a confining unit relative to the solum that may constrict groundwater flow below the solum. Additionally, results from the larger scale auger investigation suggest that deviations in subsurface topography of the C horizon may be generalizable at the larger hillslope scale. Overall, these results indicate that 1) shallow groundwater flow direction and magnitude within this headwater catchment are dynamic and can deviate from surface topography, and 2) the subsurface topography of the C horizon can influence groundwater flow direction. These results imply that temporal dynamics of groundwater flow direction and magnitude should be considered when characterizing subsurface flow in critical zone studies. Additionally, knowledge of subsurface topography of confining units may provide constraints on the temporal variability of groundwater flow direction. / M.S. / Streams that originate at higher elevations (defined as headwater streams) are important drinking water sources and deliver water and nutrients to maintain freshwater ecosystems. Groundwater is a major source of water to these streams, but little is known about how groundwater flows in these areas. Scientists delineate watersheds (areas of land that drain water to the same point) using surface topography. This approach works well for surface water, but not as well for groundwater, as groundwater may not flow in the same direction as surface water. Thus, assuming that the ground-watershed is the same as the surface watershed can lead to errors in hydrologic studies. To obtain more accurate information about groundwater flow in headwater areas, I continuously measured groundwater levels in forest soils at the Hubbard Brook Experimental Forest in North Woodstock, NH. My main objective was to determine if there is variability in the direction and amount of groundwater flow. I also measured the characteristics of the soils to identify the thicknesses of soil units and the permeability of those units. I used these data to evaluate the relationship between groundwater flow direction, surface topography, and the permeability of soil units. Overall, I found that groundwater flow direction can differ significantly from surface topography, and groundwater flow direction was influenced by the groundwater levels. When groundwater levels were high (closer to the land surface), groundwater flow was generally in the same direction as surface topography. However, when groundwater levels were lower, flow direction typically followed the slope of the lowest permeability soil unit. These results suggest that scientists should not assume that groundwater flow follows the land surface topography and should directly measure groundwater levels to determine flow direction. In addition, results from this study show that characterizing soil permeability can help scientists make more accurate measurements of groundwater flow.

No abstract provided. / Thesis / Master of Engineering (MEngr) / Scope and contents: This thesis describes the behaviour of iron ore-water suspensions under turbulent flow conditions. This work is divided into two parts. Part I deals with the regimes of transport under steady state flow conditions in circular and horizontal ducts. The heterogeneous flow regime is extensively analyzed; a sequential discrimination of models with an oriented design of experiments have permitted the determination of the best model to correlate hydraulic gradients for these suspensions. A critical discussion on the limit deposit conditions is also included. Part II describes the behaviour of clear water under oscillatory flow conditions. The study demonstrates that the quasi-steady state hypothesis, i.e., fully developed flow assumption, applied to pulsatile turbulent flow under the conditions studied. Observations on the behaviour of iron ore-water suspensions under pulsatile flow are also included. The experiments were carried out using a new air-pulsing technique.

Non-overflow flow-through rockfill structures are river engineering elements used to attenuate and delay inflow hydrographs. They represent expedient places to deposit rather enormous quantities of waste rock at mountainous mine sites. Their application has become so common that matters of safety regarding their design have been laid out in Section 8.5 of the Canadian Dam Safety Guidelines (CDA 2007). The research described herein was directed at investigating the different aspects of the hydraulics of these flow-through rockfill structures. In order to assess the potential for an unraveling failure of flow-through rockfill dams, a systematic study of the hydraulic design of these structures was conducted and the non-linear nature of flow through these structures was dealt with using a p-LaPlacian-like partial differential equation. Subsequently, factors of safety against this type of failure are presented for a range of downstream slopes, thus showing the unsafe combinations of embankment slope and particle diameter. Three different index gradients within the toe of such structures were investigated. In this regard, the gradient most suitable for independently computing the height of the point of first flow emergence on the downstream face is examined and a method for independently computing the variation in hydraulic head within that vertical (which allows for the toe of the structure to be isolated) is presented. An additional gradient that allows for the independent estimation of the default tailwater depth is proposed. In order to provide better tools to assess the behavior of these embankments at the toe, laboratory and analytical studies were undertaken. In this regard, the hydraulics associated with the zone of the downstream toe were studied. The depth variation of the seepage-face was computationally modeled, and two approaches for solving the spatially varied flow (SVF) condition problem within the toe region undertaken. The results show that a dual linear variation in depth can be used to good accuracy, without inducing any unrealistic exit gradients in the zone of primary concern with respect to unraveling. It is hoped that these techniques and computational tools provided herein will aid in facilitating the design and assessment of these flow-through rockfill structures.