1 |
Optiska egenskapers påverkanav möjligheten att trycka eftermålvärden i ISO 12647-2.Strandman, Karolina January 2010 (has links)
This thesis investigates how the optical properties of paperboard influences printing with targets in ISO 12647-2. The targets for optical properties in ISO 12647-2 are defined for paperboard without optical brightening agents and fluorescent brightening agents wich makes it difficult to reach the targets when printing paperboard containing these agents.Seven different types of paperboard, some with and some without the agents, have been printed and instrumentally andvisually measured to see if there is any deviation from the standard targets and if it shows visually.The result shows that paperboard containing optical brightening agents and fluorescent brightening agents can print with targets in ISO 12647-2 but in many measurments the difference between the types of paperboard were to small to assess. The differences between the types of paperboard in the instrumental measurements did not fully correspond with the waythe panel appraised them visually.
|
2 |
Introduktion till Certifierad Grafisk Produktion på Jernström OffsetRäms, Sofie, Granholm, Ida January 2009 (has links)
The aim for this thesis was to develop a proposal of documentation, containing rules and procedures, which JernströmOffset needs to acquire the Certified Graphic Production certification. A fundamental part was to study the materialissued by Sveriges Grafiska Mediaförening, to clarify the requirements that must be met to obtain the certification. Therecommendations found in the CGP material must also be considered.Based on the requirements and recommendations of Certified Graphic Production, a mapping of the workflows atJernström Offset was performed. It was done by interviewing employees from different departments at the company,this to get a clear understanding of the operations carried out throughout the production flow and the final qualityfollow-up.During our reviewing process we found that a number of changes, in terms of working environment and practices,must be made at the company. As a result of this we propose some appropriate actions to be implemented.The documentation was finally written, through the requirements and recommendations of Certified GraphicProduction and then applied to Jernström Offset’s work procedures.
|
3 |
Printing colour hard proofs using EFI Colorproof XF v. 3.1 and Photoshop CS3, and production substrates.Johansson, Nils January 2009 (has links)
EFI Colorproof XF was found to be more convenient from a user’s aspect, and had features which are covered in the ISO 12647-7 standard (e.g. the ability to simulate screening and print margin information), which Photoshop CS3 lacked. None of the proofing systems distinguished itself in a clear way from the other; sometimes, on certain substrates, Photoshop CS3 produced most accurate colours, sometimes EFI Colorproof XF did. Further investigations need to be carried out to tell more exactly which system produce most accurate colours. Only 6 out of 34 simulation-combinations had colours within the tolerances in the standard. The result also shows that the production substrates should not be used as proofing substrates. Instead the proofing papers especially made for ink jet should be used to obtain more colour-accurate prints.
|
Page generated in 0.0261 seconds