This PhD work was motivated by the CEA R&D program to provide solid technological basis for the use of Brayton power conversion system in Sodium-cooled Fast nuclear Reactors (SFRs). Multi-channel compact heat exchangers are necessary for the present application because of the low heat transfer capacity of the gas foreseen. In ASTRID project, a minimum size of Na channels section is required to avoid the plugging risk. However, this induces very low pressure losses in the bundle. Considering an additional inlet flow condition, a real risk of bad flow distribution remains. As a result, the thermal performance and thermal loading of the heat exchanger degrades due to it. The main goal of this work was to overcome the flow maldistribution problem by means of an innovative design of sodium distribution system (PATENT FR1657543), the development of a numerical strategy and the construction of an experimental database to validate all theoretical studies. The innovative sodium distribution system consists on an inlet header which tries to guide the evolution of the impinging jet flow while a system of bifurcating pre-distribution channels increases pressure drops in the bundle. Lateral communications between pre-distribution channels are introduced to further homogenize the flow. Two experimental facilities have been conceived to study the flow behavior in bifurcating channels and in the inlet header, respectively. At the same time, their effect on the flow distribution between channels is evaluated. The acquired PIV aerodynamic database allows to validate the numerical models and to prove the design basis for the proposed distribution system. Once having validated the CFD turbulence models and the strategy to study the flow maldistribution in the SGHE module, a decisive and trustworthy optimization of each component of the sodium distribution system has been performed. Finally, an optimal configuration has been proposed for the actual phase of ASTRID project.

Shallow foundations rested on Leda clay that are widely distributed in Eastern Canada exhibit shrinkage characteristics and are prone to differential settlements. Due to this reason, significant repairs are necessary to the foundations and basements of residential structures constructed in Leda clay deposits. Differential settlements are commonly attributed to the changes in the natural water content of soils associated with water infiltration, evaporation or plant transpiration (i.e., tree-roots-suction). Various research studies have been undertaken to estimate the possible settlements of shallow foundations associated with the water infiltration or evaporation. Several thumb rules have been proposed through research studies, providing recommendations with respect to the distance at which trees must be planted as a function of their heights at maturity such that differential settlements can be avoided. However, limited studies have been carried out to estimate or model the settlements of shallow foundations taking into account the influence of tree-roots-suction. In the present research program, a comprehensive experimental study regarding the deformation characteristics of a sandy loam soil from Ottawa due to tree-root-suction is undertaken, using specially designed equipment. The study has been undertaken using a sandy loam soil so that the testing program can be conducted in a shorter period of time. An artificial rooting system (ARS) was designed and placed in a specially designed tank at the University of Ottawa to simulate tree-roots-suction and measure soil surface settlements associated with a decrease in natural water content (or increase in soil suction) using particle image velocimetry (PIV) technique. The ARS consists of an artificial root, suction generator, matric suction and volumetric water content monitoring devices. The variation of matric suction and volumetric water content are monitored at various depths using the instrumentation of the ARS. Based on the results of the experimental studies, a methodology is proposed to model the settlement behaviour of sandy loam soils due to suction from ARS, using commercial finite element software, SEEP/W and SIGMA/W (i.e. software package of GeoStudio 2007). The study offers a reasonably good comparison between the measured surface settlements and those estimated using the finite element modelling analysis. The modelling methodology presented in this thesis is promising and may be extended for estimating the settlement behaviour associated with the tree roots suction of Leda clay deposits and to other soils.

No description available.

The thesis deals with the issue of indoor air quality of schools and kindergartens. It focuses particularly on the inadequate ventilation and the application of forced ventila-tion in these types of buildings. The proposed solution is applied to a kindergarten in Kuřim. Measurements of the C02 concentration levels were performed in the presence and absence of air conditioning. To elaborate the proposed solution a simulation was made using a software called ANSYS Fluent. Input values for the simulation were obtained from an experimental measurement of a ventilation diffuser made by a company called Climecon ROX using the PIV method. This diffuser was then installed in the kindergarten. The measure-ments were carried out in the framework of the project the experimental validation of numerical models of the air flow in buildings marked with FAST-S-6-3387.

<div>Particle Image Velocimetry (PIV) is a non-invasive measurement technique which resolves the flow velocity by taking instantaneous snapshots of tracer particle motion in the flow and uses digital image cross-correlation to estimate the particle shift up to subpixel accuracy. The measurement chain incorporates numerous sets of parameters, such as the particle displacements, the particle image size, the flow shear rate, the out-of-plane motion for planar PIV and image noise to name a few, and these parameters are interrelated and influence the final velocity estimate in a complicated way. In the last few decades, PIV has become widely popular by virtue of developments in both the hardware capabilities and correlation algorithms, especially with the scope of 3-component (3C) and 3-dimensional (3D) velocity measurements using stereo-PIV and tomographic-PIV techniques, respectively. The velocity field measurement not only leads to other quantities of interest such as Pressure, Reynold stresses, vorticity or even diffusion coefficient, but also provides a reference field for validating numerical simulations of complex flows. However, such a comparison with CFD or applicability of the measurement to industrial design requires one to quantify the uncertainty in the PIV estimated velocity field. Even though the PIV community had a strong impetus in minimizing the measurement error over the years, the problem of uncertainty estimation in local instantaneous PIV velocity vectors have been rather unnoticed. A typical norm had been to assign an uncertainty of 0.1 pixels for the whole field irrespective of local flow features and any variation in measurement noise. The first article on this subject was published in 2012 and since then there has been a concentrated effort to address this gap. The current dissertation is motivated by such a requirement and aims to compare the existing 2D PIV uncertainty methods, propose a new method to directly estimate the planar PIV uncertainty from the correlation plane and subsequently propose the first comprehensive methods to quantify the measurement uncertainty in stereo-PIV and 3D Particle Tracking Velocimetry (PTV) measurements.</div><div>The uncertainty quantification in a PIV measurement is, however, non-trivial due to the presence of multitude of error sources and their non-linear coupling through the measurement chain transfer function. In addition, the advanced algorithms apply iterative correction process to minimize the residual which increases the complexity of the process and hence, a simple data-reduction equation for uncertainty propagation does not exist. Furthermore, the calibration or a reconstruction process in a stereo or volumetric measurement makes the uncertainty estimation more challenging. Thus, current uncertainty quantification methods develop a-posterior models utilizing the evaluated displacement information and combine it with either image information, correlation plane information or even calibration “disparity map” information to find the desired uncertainties in the velocity estimates.</div><div><br></div>

The purpose of this work is to test the feasibility of using particle image velocimetry(PIV) for measurements of flow through a porous medium, more specifically in this casea rotating bed reactor S3. The results from experiments preformed can then be usedto validate and improve computational fluid dynamics models. The report presentsdifferent possible combinations of solids and fluids for refractive index matchingand tests some velocity limits of the optical equipment used. PIV appears to be apromising method for measuring flow through a porous medium. The theoreticallimit due to motion blur is an angular velocity of around 3800 RPM, and the actualtested lower bound for this limit is 453 RPM.

No description available.

Solutions of self-assembled wormlike micelles are used with ever increasing frequency in a multitude of consumer products ranging from cosmetic to industrial applications. Owing to the wide range of applications, flows of interest are often complex in nature; exhibiting both extensional and shear regions that can make modeling and prediction both challenging and valuable. Adding to the complexity, the micellar dynamics are continually changing, resulting in a number of interesting phenomena, such as shear banding and extensional flow instabilities. Presented in this thesis are the results of an investigation into the flow fields generated by both a controllable and idealized porous media, effected as a periodic array of cylinders as well as a single circular cylinder. In order to fully characterize the kinematics, two rheologically documented test fluids were used. The first test channel geometry consists of six equally spaced cylinders, arranged perpendicular to the flow, while the second consists of a single circular cylinder. By systematically varying the Deborah number, the flow kinematics, stability and pressure drop were measured. A combination of particle image velocimetry in conjunction with flush mount pressure transducers were used to characterize the flow, while flow induced birefringence measurements were used to determine micelle deformation and alignment. In the periodic geometry, the pressure drop was found to decrease initially due to the shear thinning of the test fluid, and then exhibit a dramatic upturn as other elastic effects begin to dominate in one of the test fluids. In the case of the single cylinder, no such upturn was observed. Presented is evidence of the onset of an elastic instability in one of the test fluids above a critical Deborah number, manifest in fluctuating transient pressure drop measurements and asymmetric streamlines. This instability was observed in both test geometries. It is argued that this instability can be attributed to the measurable differences in the extensional rheology of the two fluids.

Vortex generator jets (VGJs) have proven to be effective in minimizing the separation losses on low-pressure turbine blades at low Reynolds numbers. Experimental data collected using phase-locked particle image velocimetry and substantiated with a hot-film anemometer were used to answer fundamental questions about the influence of VGJs on a separated boundary layer. The data were collected on the suction surface of the Pack B blade profile, which has a non-reattaching separation bubble beginning at 68% axial chord. Two VGJ pulse histories were created with different frequencies, jet durations, and duty cycles. The mechanisms responsible for boundary layer separation control were shown to be a combination of boundary layer transition and streamwise vortical structures. Jet duration and relaxation time were important VGJ characteristics in determining the extent of control. The unsteady environment characterisitic of the low-pressure turbine section in a gas turbine engine effectively reduces the time-averaged separation zone by as much as 35%. Upstream blade rows create unsteady flow disturbances (wakes) that transition the flow. This transitioned flow propagates downstream, re-attaching the separation bubbles on the subsequent blade row. Phase-locked PIV and hot-film measurements were used to document the characteristics of this separation zone when subjected to synchronized unsteady wakes and VGJs. The phase difference between VGJ actuation and the wake passing, blowing ratio, and VGJ duration were optimized to achieve the greatest time-averaged control of the separation zone. The experimental data were used to identify the important characteristics of the wake/jet interaction. Phase-locked PIV measurements were taken to isolate the wake event (wake only), the VGJ event (jets only), and the synchronized combination of unsteady wakes and jets. The synchronized conditions achieved maximum separation bubble control. The presence of wake and jet induced calmed zones are also noted.

Voice quality is strongly linked to quality of life; those who suffer from voice disorders are adversely affected in their social, family, and professional relationships. An effort has been made to more fully understand the physics behind how the voice is created, specifically the fluid structure interactions that occur during vocal fold vibration. Many techniques have been developed and implemented to study both the motion of the vocal folds and the airflow that creates the motion. Until recently these techniques have sought to understand a highly three-dimensional phenomenon with 1D or 2D perspectives.This research focuses on the development and implementation of an experimental technique to obtain three-dimensional characterizations of vocal fold motion and fluid flow. Experiments were performed on excised human vocal fold models at the University Hospital Erlangen Medical School in Erlangen, Germany. A novel technique for tracking the motion of the vocal folds using multiple camera viewpoints and limited user interaction was developed. Four high-speed cameras (2000 fps) recorded an excised vocal fold model vibrating at 250 Hz. Based on the images from these four cameras a fully 3D reconstruction of the superior surface of the vocal folds was achieved. The 3D reconstruction of 70 consecutive time steps was assembled to characterize the motion of the vocal folds over eight cycles. The 3D reconstruction accurately modeled the observed behavior of vocal fold vibration with a clearly visible mucosal wave. The average reprojection error for this technique was on par with other contemporary techniques (~20 micrometers). A whole field, time resolved, three-dimensional reconstruction of the vocal fold fluid flow was obtained using synthetic aperture particle image velocimetry. Simultaneous 3D flow fields, subglottal pressure waves, and superior surface motion were presented for 2 consecutive cycles of oscillation. The vocal fold fluid flow and motion measurements correlated with behavior observed in previous three-dimensional studies. A higher resolution view of one full cycle of oscillation was compiled from 16 time resolved data sets via pressure data. The result was a full three-dimensional characterization of the evolution and disintegration of the glottal jet.