<p>The nitrilases are an important class of industrial enzymes that are found in all phyla. These enzymes are expressed widely in prokaryotes and eukaryotes. Nitrilases convert nitriles to corresponding acids and ammonia. They are used in industry as biocatalysts because of their specificity and enantioselectivity. These enzymes belong to the nitrilase superfamily in which members share a common &alpha / &beta / &beta / &alpha / structural fold and a unique cys, glu,lys catalytic triad with divergent N- and C-terminals.</p> <p>There are four atomic structures of distant homologues in the superfamily, namely 1ems, 1erz, 1f89 and 1j31. All structures have two-fold symmetry which conserves the &alpha / &beta / &beta / &alpha / -&alpha / &beta / &beta / &alpha / fold across the dimer interface known as the A surface. The construction of a 3D model based on the solved structures revealed the enzyme has two significant insertions in its sequence relative to the solved structures, which possibly correspond to the C surface. In addition there are intermolecular interactions in a region of a conserved helix, called the D surface. These surfaces contribute additional interactions responsible for spiral formation and are absent in the atomic resolution homologues.</p> <p>The recombinant enzyme from R.rhodochrous J1 was expressed in E. coli BL21 cells and eluted by gel filtration chromatography as an active 480 kDa oligomer and an inactive 80 kDa dimer in the absence of benzonitrile. This contradicts previous observations, which reported the native enzyme exists as an inactive dimer and elutes as a decamer in the presence benzonitrile. Reducing SDS-PAGE showed a subunit atomic mass of ~40 kDa. EM and image analysis revealed single particles of various shapes and sizes, including c-shaped particles, which could not form spirals due to steric hindrances in its C terminal.</p> <p>Chromatographic re-elution of an active fraction of 1-month old J1 nitrilase enabled us to identify an active form with a mass greater than 1.5 MDa. Reducing SDS-PAGE, N-terminal sequencing and mass spectroscopy showed the molecular weight was ~36.5 kDa as result of specific proteolysis in its C terminal. EM revealed the enzyme forms regular long fibres. Micrographs (109) were recorded on film using a JEOL 1200EXII operating at 120 kV at 50K magnification. Two independent 3D reconstructions were generated using the IHRSR algorithm executed in SPIDER. These converged to the same structure and the resolution using the FSC 0.5 criterion was 1.7 nm.</p> <p>The helix structure has a diameter of 13nm with ~5 dimers per turn in a pitch of 77.23 &Aring / . Homology modeling and subsequent fitting into the EM map has revealed the helix is built primarily from dimers, which interact via the C and D surfaces. The residues, which potentially interact across the D surface, have been identified and these confer stability to the helix. The conservation of the insertions and the possibility of salt bridge formation on the D surface suggest that spiral formation is common among microbial nitrilases. Furthermore, the presence of the C terminal domain in J1 nitrilase creates a steric hindrance that prevents spiral formation. When this is lost &ndash / either by specific proteolysis or autolysis - an active helix is formed.</p>

<p>The nitrilases are an important class of industrial enzymes that are found in all phyla. These enzymes are expressed widely in prokaryotes and eukaryotes. Nitrilases convert nitriles to corresponding acids and ammonia. They are used in industry as biocatalysts because of their specificity and enantioselectivity. These enzymes belong to the nitrilase superfamily in which members share a common &alpha / &beta / &beta / &alpha / structural fold and a unique cys, glu,lys catalytic triad with divergent N- and C-terminals.<br /> <br /> There are four atomic structures of distant homologues in the superfamily, namely 1ems, 1erz, 1f89 and 1j31. All structures have two-fold symmetry which conserves the &alpha / &beta / &beta / &alpha / -&alpha / &beta / &beta / &alpha / fold across the dimer interface known as the A surface. The construction of a 3D model based on the solved structures revealed the enzyme has two significant insertions in its sequence relative to the solved structures, which possibly correspond to the C surface. In addition there are intermolecular interactions in a region of a conserved helix, called the D surface. These surfaces contribute additional interactions responsible for spiral formation and are absent in the atomic resolution homologues.<br /> <br /> The recombinant enzyme from R.rhodochrous J1 was expressed in E. coli BL21 cells and eluted by gel filtration chromatography as an active 480 kDa oligomer and an inactive 80 kDa dimer in the absence of benzonitrile. This contradicts previous observations, which reported the native enzyme exists as an inactive dimer and elutes as a decamer in the presence benzonitrile. Reducing SDS-PAGE showed a subunit atomic mass of ~40 kDa. EM and image analysis revealed single particles of various shapes and sizes, including c-shaped particles, which could not form spirals due to steric hindrances in its C terminal.</p> <p>Chromatographic re-elution of an active fraction of 1-month old J1 nitrilase enabled us to identify an active form with a mass greater than 1.5 MDa. Reducing SDS-PAGE, N-terminal sequencing and mass spectroscopy showed the molecular weight was ~36.5 kDa as result of specific proteolysis in its C terminal. EM revealed the enzyme forms regular long fibres. Micrographs (109) were recorded on film using a JEOL 1200EXII operating at 120 kV at 50K magnification. Two independent 3D reconstructions were generated using the IHRSR algorithm executed in SPIDER. These converged to the same structure and the resolution using the FSC 0.5 criterion was 1.7 nm.<br /> <br /> The helix structure has a diameter of 13nm with ~5 dimers per turn in a pitch of 77.23 &Aring / . Homology modeling and subsequent fitting into the EM map has revealed the helix is built primarily from dimers, which interact via the C and D surfaces. The residues, which potentially interact across the D surface, have been identified and these confer stability to the helix. The conservation of the insertions and the possibility of salt bridge formation on the D surface suggest that spiral formation is common among microbial nitrilases. Furthermore, the presence of the C terminal domain in J1 nitrilase creates a steric hindrance that prevents spiral formation. When this is lost &ndash / either by specific proteolysis or autolysis - an active helix is formed.</p>

A dissertation submitted to the Faculty of Science, University of the Witwatersrand, Johannesburg, fulfilment of the requirements for the degree of Master of Science. Johannesburg 2017. / Pichia pastoris is an established platform for the production of industrial enzymes. This nonfermentative methylotrophic yeast has many attractive features for the production of heterologous protein both in the laboratory and in industry. The PichiaPinkTM multi-copy secreted expression system was selected for the heterologous production of the fluorinase from Streptomyces cattleya. Fluorinase enzymes are useful for the production of fluorinated compounds which are applied in the agrochemical and pharmaceutical industries. The gene was cloned into the pPinkα-HC vector and used to transform four host srains by electroporation. Protein production was induced with 0.5% methanol and expression and activity was analysed by SDS-PAGE and a HPLC activity assay. Construction of the pPinkαHC-fLA expression plasmid and transformation of the host strains proved succesful. The PichiaPinkTM integrants showed genetic instability as the expression cassette showed signs of gene excision, thereby reducing the gene copy number. The wild-type strain1 efficiently secreted the foreign protein into the culture media, but the α-MF secretion signal was not processed correctly and secretion failed for the three protease knockout strains. However, the enzyme in both the secreted and intracellular protein fraction showed activity. Secretion methods need to be optimised and intracellular expression should be explored. The fluorinase enzyme was successfully cloned and expressed in four PichiaPinkTM strains and a biologically active protein was produced. / XL2017

by Nancy Wang. / Bibliography: leaves 126-144 / Thesis (M.Ph.)--Chinese University of Hong Kong, 1984

No description available.

No description available.

Microbial nitrile hydratases are important industrial enzymes that catalyse the conversion of nitriles to the corresponding amides. A thermostable, cobalt-type Bacillus sp. RAPc8 microbial nitrile hydratase was cloned and expressed in E.coli. In this study the primary aim was to determine the molecular structure of Bacillus sp. RAPc8 microbial nitrile hydratase.

<p>The nitrilases are an important class of industrial enzymes that are found in all phyla. These enzymes are expressed widely in prokaryotes and eukaryotes. Nitrilases convert nitriles to corresponding acids and ammonia. They are used in industry as biocatalysts because of their specificity and enantioselectivity. These enzymes belong to the nitrilase superfamily in which members share a common &alpha / &beta / &beta / &alpha / structural fold and a unique cys, glu,lys catalytic triad with divergent N- and C-terminals.</p> <p>There are four atomic structures of distant homologues in the superfamily, namely 1ems, 1erz, 1f89 and 1j31. All structures have two-fold symmetry which conserves the &alpha / &beta / &beta / &alpha / -&alpha / &beta / &beta / &alpha / fold across the dimer interface known as the A surface. The construction of a 3D model based on the solved structures revealed the enzyme has two significant insertions in its sequence relative to the solved structures, which possibly correspond to the C surface. In addition there are intermolecular interactions in a region of a conserved helix, called the D surface. These surfaces contribute additional interactions responsible for spiral formation and are absent in the atomic resolution homologues.</p> <p>The recombinant enzyme from R.rhodochrous J1 was expressed in E. coli BL21 cells and eluted by gel filtration chromatography as an active 480 kDa oligomer and an inactive 80 kDa dimer in the absence of benzonitrile. This contradicts previous observations, which reported the native enzyme exists as an inactive dimer and elutes as a decamer in the presence benzonitrile. Reducing SDS-PAGE showed a subunit atomic mass of ~40 kDa. EM and image analysis revealed single particles of various shapes and sizes, including c-shaped particles, which could not form spirals due to steric hindrances in its C terminal.</p> <p>Chromatographic re-elution of an active fraction of 1-month old J1 nitrilase enabled us to identify an active form with a mass greater than 1.5 MDa. Reducing SDS-PAGE, N-terminal sequencing and mass spectroscopy showed the molecular weight was ~36.5 kDa as result of specific proteolysis in its C terminal. EM revealed the enzyme forms regular long fibres. Micrographs (109) were recorded on film using a JEOL 1200EXII operating at 120 kV at 50K magnification. Two independent 3D reconstructions were generated using the IHRSR algorithm executed in SPIDER. These converged to the same structure and the resolution using the FSC 0.5 criterion was 1.7 nm.</p> <p>The helix structure has a diameter of 13nm with ~5 dimers per turn in a pitch of 77.23 &Aring / . Homology modeling and subsequent fitting into the EM map has revealed the helix is built primarily from dimers, which interact via the C and D surfaces. The residues, which potentially interact across the D surface, have been identified and these confer stability to the helix. The conservation of the insertions and the possibility of salt bridge formation on the D surface suggest that spiral formation is common among microbial nitrilases. Furthermore, the presence of the C terminal domain in J1 nitrilase creates a steric hindrance that prevents spiral formation. When this is lost &ndash / either by specific proteolysis or autolysis - an active helix is formed.</p>

<p>The nitrilases are an important class of industrial enzymes that are found in all phyla. These enzymes are expressed widely in prokaryotes and eukaryotes. Nitrilases convert nitriles to corresponding acids and ammonia. They are used in industry as biocatalysts because of their specificity and enantioselectivity. These enzymes belong to the nitrilase superfamily in which members share a common &alpha / &beta / &beta / &alpha / structural fold and a unique cys, glu,lys catalytic triad with divergent N- and C-terminals.<br /> <br /> There are four atomic structures of distant homologues in the superfamily, namely 1ems, 1erz, 1f89 and 1j31. All structures have two-fold symmetry which conserves the &alpha / &beta / &beta / &alpha / -&alpha / &beta / &beta / &alpha / fold across the dimer interface known as the A surface. The construction of a 3D model based on the solved structures revealed the enzyme has two significant insertions in its sequence relative to the solved structures, which possibly correspond to the C surface. In addition there are intermolecular interactions in a region of a conserved helix, called the D surface. These surfaces contribute additional interactions responsible for spiral formation and are absent in the atomic resolution homologues.<br /> <br /> The recombinant enzyme from R.rhodochrous J1 was expressed in E. coli BL21 cells and eluted by gel filtration chromatography as an active 480 kDa oligomer and an inactive 80 kDa dimer in the absence of benzonitrile. This contradicts previous observations, which reported the native enzyme exists as an inactive dimer and elutes as a decamer in the presence benzonitrile. Reducing SDS-PAGE showed a subunit atomic mass of ~40 kDa. EM and image analysis revealed single particles of various shapes and sizes, including c-shaped particles, which could not form spirals due to steric hindrances in its C terminal.</p> <p>Chromatographic re-elution of an active fraction of 1-month old J1 nitrilase enabled us to identify an active form with a mass greater than 1.5 MDa. Reducing SDS-PAGE, N-terminal sequencing and mass spectroscopy showed the molecular weight was ~36.5 kDa as result of specific proteolysis in its C terminal. EM revealed the enzyme forms regular long fibres. Micrographs (109) were recorded on film using a JEOL 1200EXII operating at 120 kV at 50K magnification. Two independent 3D reconstructions were generated using the IHRSR algorithm executed in SPIDER. These converged to the same structure and the resolution using the FSC 0.5 criterion was 1.7 nm.<br /> <br /> The helix structure has a diameter of 13nm with ~5 dimers per turn in a pitch of 77.23 &Aring / . Homology modeling and subsequent fitting into the EM map has revealed the helix is built primarily from dimers, which interact via the C and D surfaces. The residues, which potentially interact across the D surface, have been identified and these confer stability to the helix. The conservation of the insertions and the possibility of salt bridge formation on the D surface suggest that spiral formation is common among microbial nitrilases. Furthermore, the presence of the C terminal domain in J1 nitrilase creates a steric hindrance that prevents spiral formation. When this is lost &ndash / either by specific proteolysis or autolysis - an active helix is formed.</p>

The research investigated the application of continuous coaxial laser cladding by powder injection as a surface treatment or coating process. The investigation aimed to establish the relationship between a change in the main laser cladding process variables and the geometry and characteristics of an Al-20wt-Si single pass clad layer formed on an Al 1370-F substrate using a Nd:YAG laser. The main process variables considered were: laser power, laser scanning velocity and the powder feed rate. The relationship between a change in the main laser cladding process variables and the geometry and characteristics of the clad layer was established by statistically analysing the variation in the process response with a change in the main laser cladding process variables. The process variables were varied based on a full-factorial, experimentally optimized test matrix. The clad geometry which is mainly defined by: the clad height, width, clad aspect ratio, depth of alloy penetration, and the clad root angle/wetting angle was investigated. In addition to the clad geometry several clad characteristics were investigated such as the dilution of the clad layer in the substrate material, the Vickers microhardness and microstructure of the clad crosssection, the powder efficiency of the process and the amount of visible defects. The study successfully established the relationship between the main laser cladding process variables and the clad geometry and characteristics. The secondary objective of establishing a suitable processing window by considering the relationship mentioned above was only partially met since it is believed that further refinement of the experimental cladding test setup and therefore also the experimental variable test levels is required.