Plastic injection moulding machines are a positive example of the possibilities in terms of performance and energy efficiency of modern hydraulic drives technology. In addition to the performance and energy efficiency of the machines, the quality of the plastic mouldings and an easy to use machines control is the focus. To ensure a constant plastics part quality the set process parameters of the injection moulding machines are kept constant by appropriate closed loop control strategies today. Assuming a constant quality of the processed plastic raw material, this strategy is effective. If it comes to a qualitative variation in the processed plastics, which often leads to a change in viscosity of the plastics melt, keeping processing parameters constant will not lead to a constant quality of the moulded parts. The deviations in the plastics viscosity have such a great influence on the moulding process that the relevant process parameters have to be adjusted manually in many cases. Often the stroke of the reciprocating screw system has to be adapted to reach a constant filling volume of the cavity and therefore avoid burr formation or short shots. In this paper an approach for adaptive process control is introduced. This control loop is able to correct the set points of specific machines parameters online within the production cycle and therefore is able to avoid changes in the produced parts quality.

Yes / Ultrasound injection molding has emerged as an alternative production route for the manufacturing of micro-scale polymeric components, where it offers significant benefits over the conventional micro-injection molding process. In this work, the effects of ultrasound melting on the mechanical and morphological properties of micro-polypropylene parts were characterized. The ultrasound injection molding process was experimentally compared to the conventional micro-injection molding process using a novel mold, which allows mounting on both machines and visualization of the melt flow for both molding processes. Direct measurements of the flow front speed and temperature distributions were performed using both conventional and thermal high-speed imaging techniques. The manufacturing of micro-tensile specimens allowed the comparison of the mechanical properties of the parts obtained with the different processes. The results indicated that the ultrasound injection molding process could be an efficient alternative to the conventional process.

Published Article / South Africa is constantly loosing contracts for the manufacturing of innovative projects to the East, due to its non-competitive mould-making industry. The paper will report on progress made in a specific focus area in mould-making, namely Hybrid Moulds for injection moulding. Hybrid Moulds refers to a hybrid between Additive Fabrication and conventional methods through the use of amongst others, Direct Metal Laser Sintering techniques, combined with conventional CNC machining (High Speed) techniques. Although the emphasis is on an economically viable process for limited production runs, once the moulds have been developed, it normally is pushed to its limits to realize production quantities. One of the competitive edges is the cutting of lead-times, which obviously impacts on production costs. Another aspect is the ability to manufacture short runs of injection moulded parts in the required engineering material Realising that Laser Sintering of metals is an expensive manufacturing process, a concurrent manufacturing process was developed. Intricate mould details, which normally are time-consuming to manufacture through EDM processes, were grown as inserts, while the less-complex parts of the mould is machined in Aluminium through 3 and 5 Axis High Speed CNC Machining. Using a 3-axis CNC wire cutter, pockets will be created where the more complex Laser Sintered Metal inserts will be fitted. One of the competitive edges is the cutting of lead-times, which obviously impacts on production costs. Another aspect is the ability to manufacture short runs of injection moulded parts in the required engineering material.

Published Article / Metal injection moulding (MIM) offers advantages for mass production of components over conventional production methods for parts with complex shapes and large production runs. The MIM process includes mixing a fine metallic powder with a polymeric binder to produce a homogeneous feedstock. This enables the production of metallic components in a similar manner to plastic injection moulding. After undergoing a process of binder removal the components undergo a conventional sintering cycle. As significant shrinkage occurs (as much as 30%) this must be considered when designing the die cavity. This paper describes the design and manufacture of a die to produce tensile specimens. Extensive injection moulding trials to produce acceptable tensile components were undertaken. The complexities and possible implications of the design of a mould on the process are discussed. The outcomes of this research will be used by the CSIR for further development and application of the MIM technology for manufacture of high value components, such as dental implants.

Yes / The paper reports an investigation on the mechanical durability of textured thermoplastic surfaces together with their respective wetting properties. A range of laser-induced topographies with different aspect ratios from micro to nanoscale were fabricated on tool steel inserts using an ultrashort pulsed near infrared laser. Then, through micro-injection moulding the topographies were replicated onto polypropylene surfaces and their durability was studied systematically. In particular, the evolution of topographies on textured thermoplastic surfaces together with their wetting properties were investigated after undergoing a controlled mechanical abrasion, i.e. reciprocating dry and wet cleaning cycles. The obtained empirical data was used both to study the effects of cleaning cycles and also to identify cleaning procedures with a minimal impact on textured thermoplastic surfaces and their respective wetting properties. In addition, the use of 3D areal parameters that are standardised and could be obtained readily with any state-of-the-art surface characterisation system are discussed for monitoring the surfaces’ functional response. / The full-text of this article will be released for public view at the end of the publisher embargo on 23 Jan 2020.

Diploma thesis deals with the development of injection moulding machine design. It is a type of industrial machine, which is designed for production of plastic parts by technology of compression molding. Injection and closing units in the machine are vertical orientated to each other. Injection moulding machine is equipped with rotary table. The main task of diploma work is to design an injection moulding machine with original shape for the future. Conception of the machine is based on present progresive technical solutions. Design of the machine tolerates main ergonomic demands and make the work for operating personnel easier.

Yes / The paper reports an investigation on the mechanical durability of textured thermoplastic surfaces together with their respective wetting properties. A range of laser-induced topographies with different aspect ratios from micro to nanoscale were fabricated on tool steel inserts using an ultrashort pulsed near infrared laser. Then, through micro-injection moulding the topographies were replicated onto polypropylene surfaces and their durability was studied systematically. In particular, the evolution of topographies on textured thermoplastic surfaces together with their wetting properties were investigated after undergoing a controlled mechanical abrasion, i.e. reciprocating dry and wet cleaning cycles. The obtained empirical data was used both to study the effects of cleaning cycles and also to identify cleaning procedures with a minimal impact on textured thermoplastic surfaces and their respective wetting properties. In addition, the use of 3D areal parameters that are standardised and could be obtained readily with any state-of-the-art surface characterisation system are discussed for monitoring the surfaces' functional response. / European Commission H2020 ITN programme “European ESRs Network on Short Pulsed Laser Micro/Nanostructuring of Surfaces for Improved Functional Applications” (Laser4Fun) under the Marie Skłodowska-Curie grant agreement No. 675063 (www.laser4fun.eu) and the UKIERI DST programme “Surface functionalisation for food, packaging, and healthcare applications”. In addition, the work was supported by three other H2020 programmes, i.e. the projects on “Modular laser based additive manufacturing platform for large scale industrial applications” (MAESTRO), “High-Impact Injection Moulding Platform for mass-production of 3D and/or large micro-structured surfaces with Antimicrobial, Self-cleaning, Anti-scratch, Anti-squeak and Aesthetic functionalities” (HIMALAIA) and “Process Fingerprint for Zero-defect Net-shape Micromanufacturing” (MICROMAN).

Yes / The paper reports an investigation on the mechanical durability of textured thermoplastic surfaces together with their respective wetting properties. A range of laser-induced topographies with different aspect ratios from micro to nanoscale were fabricated on tool steel inserts using an ultrashort pulsed near infrared laser. Then, through micro-injection moulding the topographies were replicated onto polypropylene surfaces and their durability was studied systematically. In particular, the evolution of topographies on textured thermoplastic surfaces together with their wetting properties were investigated after undergoing a controlled mechanical abrasion, i.e. reciprocating dry and wet cleaning cycles. The obtained empirical data was used both to study the effects of cleaning cycles and also to identify cleaning procedures with a minimal impact on textured thermoplastic surfaces and their respective wetting properties. In addition, the use of 3D areal parameters that are standardised and could be obtained readily with any state-of-the-art surface characterisation system are discussed for monitoring the surfaces' functional response.

This project evaluates fibre length dispersion and distribution within the injection moulding process of long glass fibre reinforced polypropylene, sponsored by Autodesk Simulation. The primary material used in this investigation was a 15 mm long glass fibre reinforced polypropylene consisting of two fibre content levels, 20 wt. % and 40 wt. %. A review of previous research was compiled in this study to evaluate various glass fibre measurement methods and fibre breakage studies to establish where along the injection moulding process fibre breakage predominantly occurs and which process parameters have the greatest influence on fibre length distribution along the screw. Based on literature findings, a manual fibre length measurement method was developed and applied in this study and benchmarked against existing commercially available automated software programs and found to be more accurate in obtaining a reliable fibre length distribution within a glass fibre reinforced sample. Fibre length measurements from the nozzle confirmed that the majority of fibre breakage had already occurred in the screw. Measurements taken along the screw showed a drastic decrease in weighted average glass fibre length from initial pellet form to the end of the metering zone with sudden transitions to lower weighted average values seen at the beginning of the feeding zone and along the compression zone. Fibre dispersion results from the nozzle and along the screw through the use of a μ-CT scanner showed a complex fibre flow and orientation of fibres with the preservation of fibre clusters being seen all along the injection moulding process but chiefly in the feeding and compression zones of the screw.

Yes / The development of high-performance flexible pressure-sensing materials necessitates the simultaneous achievement of exceptional flexibility, conductivity, and alignment of micro-nano structures with the mechanical response characteristics inherent to these materials. In this study, we propose a novel method for preparing flexible microneedles as a pressure-sensitive sensor array. Firstly, we obtain conductive composite particles through extrusion granulation, which consists of a compact conductive network with micron-scale filler as the skeleton and nano-filler filling in the gaps within the network. Moreover, by utilizing the ‘volume exclusion’ effect of the microneedle array on the micron-scale filler during injection molding, nanofillers dominate in entering the microneedle. As a result, our molded product exhibits high flexibility and moderate conductivity in its pressure-sensitive area, thereby providing ultra-high-pressure resistance along with desired response characteristics and sensitivity for sensors. Additionally, due to synergistic effects between microscale fillers and nano-fillers in non-pressure sensitive bases, a compact conductive network is formed that imparts sufficient conductivity to sensor materials. The method yields sensors with excellent repeatability, high dimensional accuracy, and good consistency, effectively addressing core application challenges of flexible sensors. The microstructure array flexible sensor fabricated using high-precision injection molding technology offers high efficiency, low cost, and scalability for mass production. Furthermore, the sensitivity of sensors produced by this method is significantly higher—26.6% greater than those made using traditional methods—with a sensitivity as high as 4.71kPa -1 .