Spelling suggestions: "subject:"injectionmoulding"" "subject:"injectionmolding""
31 |
Epitaxial growth and morphological characteristics of isotactic polypropylene/polyethylene blends: Scale effect and mold temperatureDeng, D., Whiteside, Benjamin R., Wang, F., Norris, Keith, Zhang, Z. 28 January 2014 (has links)
No / This study investigates the influence of length scale effects (micro- and macro-injection molded parts) and mold temperature on the epitaxial growth and morphological characteristics in injection-molded bars of isotactic polypropylene (iPP)/high-density polyethylene (HDPE) blends. After preparing the blends with an iPP content of 70 wt% via melt extrusion, the injection-molded bars were formed using both micro and conventional injection molding. Samples were subsequently prepared from the moulded components to allow investigation of the internal morphology using wide-angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and polarized light microscopy (PLM). The results indicated that the matching of micro scale and appropriate mold temperature was most favorable for epitaxial crystallization. The micro-parts had a large fraction of shear layer compared with macro-parts. The SEM observations showed that the shear layer of the former consisted of a highly oriented shish-kebab structure. Moreover, the effects of different methods of injection molding on the morphological characteristics of the micro-parts and macro-parts in different layers were elucidated in detail using PLM and SEM.
|
32 |
Effects of mould wear on hydrophobic polymer surfaces replicated using plasma treated and laser-textured stainless steel insertsDimov, Stefan, Romano, J.-M., Sarasa, J.F., Concheso, C., Gülçür, Mert,, Dashtbozorg, B., Garcia-Giron, A., Penchev, P., Dong, H., Whiteside, Benjamin R. 12 July 2020 (has links)
Yes / The mass production of polymeric parts with functional surfaces requires economically viable manufacturing routes. Injection moulding is a very attractive option however wear and surface damage can be detrimental to the lifespan of replication masters. In this research, the replication of superhydrophobic surfaces is investigated by employing a process chain that integrates surface hardening, laser texturing and injection moulding. Austenitic stainless steel inserts were hardened by low temperature plasma carburising and three different micro and nano scale surface textures were laser fabricated, i.e. submicron triangular LaserInduced Periodic Surface Structures (LIPSS), micro grooves and Lotus-leaf like topographies. Then, a commonly available talc-loaded polypropylene was used to produce 5000 replicas to investigate the evolution of surface textures on both inserts and replicas together with their functional response. Any wear orsurface damage progressively built up on the inserts during the injection moulding process had a clear impact on surface roughness and peak-to-peak topographies of the replicas. In general, the polymer replicas produced with the carburised inserts retained the wetting properties of their textured surfaces for longer periods compared with those produced with untreated replication masters. / European Union’s H2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 675063 (www.laser4fun.eu). The work was also supported by three other H2020 projects, i.e. “HighImpact Injection Moulding Platform for mass-production of 3D and/or large micro-structured surfaces with Antimicrobial, Self-cleaning, Anti-scratch, Anti-squeak and Aesthetic functionalities” (HIMALAIA, No. 766871), “Process Fingerprint for Zero-defect Net-shape Micromanufacturing” (MICROMAN, No. 674801) and “Modular laser based additive manufacturing platform for large scale industrial applications” (MAESTRO, No. 723826). Further support was provided by the UKIERI DST programme “Surface functionalisation for 18/20 Accepted in the journal Tribology – Materials, Surfaces & Interfaces. food, packaging, and healthcare applications”
|
33 |
Correlating nano-scale surface replication accuracy and cavity temperature in micro-injection moulding using in-line process control and high-speed thermal imagingBaruffi, F., Gülçür, Mert,, Calaon, M., Romano, J.-M., Penchev, P., Dimov, S., Whiteside, Benjamin R., Tosello, G. 22 October 2019 (has links)
Yes / Micro-injection moulding (μIM) stands out as preferable technology to enable the mass production of polymeric
components with micro- and nano-structured surfaces. One of the major challenges of these processes is related
to the quality assurance of the manufactured surfaces: the time needed to perform accurate 3D surface acquisitions
is typically much longer than a single moulding cycle, thus making impossible to integrate in-line
measurements in the process chain. In this work, the authors proposed a novel solution to this problem by
defining a process monitoring strategy aiming at linking sensitive in-line monitored process variables with the
replication quality. A nano-structured surface for antibacterial applications was manufactured on a metal insert
by laser structuring and replicated using two different polymers, polyoxymethylene (POM) and polycarbonate
(PC). The replication accuracy was determined using a laser scanning confocal microscope and its dependence
on the variation of the main μIM parameters was studied using a Design of Experiments (DoE) experimental
approach. During each process cycle, the temperature distribution of the polymer inside the cavity was measured
using a high-speed infrared camera by means of a sapphire window mounted in the movable plate of the mould.
The temperature measurements showed a high level of correlation with the replication performance of the μIM
process, thus providing a fast and effective way to control the quality of the moulded surfaces in-line. / MICROMAN project (“Process Fingerprint for Zero-defect Net-shape MICRO MANufacturing”, http://www.microman.mek.dtu.dk/) - H2020 (Project ID: 674801), H2020 agreement No. 766871 (HIMALAIA), H2020 ITN Laser4Fun (agreement No. 675063)
|
34 |
An approximation to the PTT viscoelastic model for Gas Assisted Injection Moulding simulationOlley, Peter 06 February 2020 (has links)
Yes / An approximation to the Phan-Thien Tanner (PTT) constitutive model is
developed with the aim of giving low-cost simulation of Gas Assisted Injection Moulding
(GAIM) while incorporating important viscoelastic characteristics. It is shown that the
developed model gives a response typical of full viscoelastic models in transient and steady state
uniaxial and constant shear rate deformations. The model is incorporated into a 3D
finite element GAIM simulation which uses the ‘pseudo-concentration’ method to predict
residual polymer, and applied to published experimental results for a Boger fluid and a
shear-thinning polystyrene melt.
It is shown that the simulation gives a very good match to published results for the Boger
fluid which show increasing Residual Wall Thickness (RWT) with increasing Deborah
number. Against the shear-thinning polymer, the quality of match depends upon which of two
‘plausible’ relaxation times is chosen; qualitatively different results arise from two different
means of estimating a single relaxation time. A ‘multi-mode’ approach is developed to avoid
this uncertainty. It is shown that the multi-mode approach gives decreasing RWT with
increasing Deborah number in agreement with the published experimental results, and
avoids the issues that arise from estimating a single relaxation time for a molten polymer.
|
35 |
Lotus-leaf inspired surfaces: hydrophobicity evolution of replicas due to mechanical cleaning and mold wearRomano, J.-M., Garcia-Giron, A., Penchev, P., Gülçür, Mert,, Whiteside, Benjamin R., Dimov, S. 13 February 2020 (has links)
Yes / Inspired from the low wetting properties of Lotus leaves, the fabrication of dual micro/nano-scale topographies is of interest to many applications. In this research, superhydrophobic surfaces are fabricated by a process chain combining ultrashort pulsed laser texturing of steel inserts and injection moulding to produce textured polypropylene parts. This manufacturing route is very promising and could be economically viable for mass production of polymeric parts with superhydrophobic properties. However, surface damages, such as wear and abrasion phenomena, can be detrimental to the attractive wetting properties of replicated textured surfaces. Therefore, the final product lifespan is investigated by employing mechanical cleaning of textured polypropylene surfaces with multipurpose cloths following the ASTM D3450 standard. Secondly, the surface damage of replication masters after 350 injection moulding cycles with glass-fiber reinforced polypropylene, especially to intensify mould wear, was investigated. In both cases, the degradation of the dual-scale surface textures had a clear impact on surface topography of the replicas and thus on their wetting properties, too. / Europe Union H2020 research and innovation programme.
|
36 |
Design of experiment studies for the fabrication processes involved in the micro-texturing of surfaces for fluid controlWallis, Kirsty January 2013 (has links)
This thesis focuses on the use of a design of experiment approach to examine the significance of process factors and interactions on the fabrication of micro- textured surfaces. The micro-textured surfaces examined contain pillar and hole features ranging from 80 – 2 micrometers in diameter. The processes examined are the deep reactive ion etching of silicon wafers for the production of silicon mould inserts and the micro-injection moulding of polypropylene, high density polyethylene and 316LS stainless steel replicate samples of the silicon mould insert. During the deep reactive ion etching of the silicon wafers the design of experiment approach was used to determine the significant of platen power, C4F8 gas flow and switching times to the presence of pillar undercut of 10 x 10, 5 x 5 and 2 x 2 micrometer pillars. Undercuts occur when the pillar base has a smaller cross-section than the apex of the pillar. Switching times was found to be the only statistically significant parameter for both 10 x 10 and 5 x 5 micrometer pillars. The design of experiment approach is used in the micro-injection moulding of polypropylene, high density polyethylene and 316LS stainless steel replicates to examine the significance of mould temperature, cooling time, holding pressure and injection speed on the part and buffer mass of the produce samples, the height and width of pillar on the replicate surfaces and the variation of the replicated pillars height and width from the original silicon mould insert. Examination of the high density polyethylene replicates found that mould temperature was the most significant factor regarding pillar dimensions (and variation from the silicon mould insert) across the range of pillar sizes. Upon examination of the polypropylene replicates it was found that the factor of most significance on pillar dimensions varied across the different pillar sizes. Holding pressure was identified as the most significant factor with regards to the 53 x 29 and 19 x 80 micrometer pillars. Injection speed was found to be most significant for the 25 x 25 and 19 x 29 micrometer pillars. Cooling time was found to be most significant with regards to the 30 x 10, 25 x 10, 20 x 10 and 15 x 10 micrometer pillars. While ii mould temperature was found to be most significant for the 20 x 20, 15 x 15 and 10 x 30 micrometer pillars. The interaction between mould temperature and injection speed was also found to be the most significant factor with regards to the 43 x 29 and 25 x 30 micrometer pillars. Examination of the 316LS replicates found that mould temperature was the most significant factor regarding pillar dimensions for 80 x 80 and 19 x 80 micrometer pillars. While holding pressure was found to be most significant to the 29 x 29 micrometer pillars and injection speed was identified as most significant to the 53 x 80 micrometer pillars. The samples produced during the design of experiment investigations were then used to examine the effect of surface texturing on droplet behaviour. Droplet contact angles were examined on polypropylene, high density polyethylene and silicon samples structured with 10 – 2 micrometer pillar. Initial droplet contact angles were found to be higher on the polypropylene samples than the high density polyethylene or silicon samples. With the lowest initial contact angles being found for the silicon inserts. Droplet ‘channelling’ and evaporation were examined on silicon, polypropylene, high density polyethylene and 316LS samples structured with micro-channel surface pillars and holes ranging from 80 – 2 micrometer in diameter. Contact pinning of the droplet to the surface via the three- phase contact-line was noted during observations of droplet ‘channelling’. This pinning effect was observed at all sample tilt angles (30 - 90 o ). With regards to droplet evaporation, the droplets were noted to evaporate evenly (with no or limited contact pinning) on all unstructured surfaces and the surfaces structured with hole features. On the surfaces structured with pillar features, the droplets appeared too evaporated along the surface gradient from the smallest pillars to the largest.
|
37 |
Adaptive process control for stabilizing the production process in injection moulding machinesSchiffers, Reinhard, Holzinger, Georg P., Huster, Gernot January 2016 (has links)
Plastic injection moulding machines are a positive example of the possibilities in terms of performance and energy efficiency of modern hydraulic drives technology. In addition to the performance and energy efficiency of the machines, the quality of the plastic mouldings and an easy to use machines control is the focus. To ensure a constant plastics part quality the set process parameters of the injection moulding machines are kept constant by appropriate closed loop control strategies today. Assuming a constant quality of the processed plastic raw material, this strategy is effective. If it comes to a qualitative variation in the processed plastics, which often leads to a change in viscosity of the plastics melt, keeping processing parameters constant will not lead to a constant quality of the moulded parts. The deviations in the plastics viscosity have such a great influence on the moulding process that the relevant process parameters have to be adjusted manually in many cases. Often the stroke of the reciprocating screw system has to be adapted to reach a constant filling volume of the cavity and therefore avoid burr formation or short shots. In this paper an approach for adaptive process control is introduced. This control loop is able to correct the set points of specific machines parameters online within the production cycle and therefore is able to avoid changes in the produced parts quality.
|
38 |
Návrh technologie výroby plastové páčky / Design of manufacturing technology for plastic leverAdamec, Lukáš January 2009 (has links)
The aim of this project is to design the most suitable technology for manufacturing of the set component. The project contains theoretical and practical part. The theoretical part deals with division of polymer material and the description of the technology suitable for production of the set component. The practical part concentrates on the mould design of the set component including calculations and needed technological parameters of injection moulding operation.
|
39 |
On the Compensation of Dynamic Reaction Forces in Stationary MachineryRadermacher, Tobias, Lübbert, Jan, Weber, Jürgen 02 May 2016 (has links) (PDF)
This paper studies a method for active electrohydraulic force compensation in industrial scale high power applications. A valve controlled cylinder moves a mass using the force of inertia to compensate for the reaction forces of an industrial process. Two strategies for force compensation are developed and investigated in a 160 ton clamping unit of an injection moulding machine to significantly reduce the excitation. Results of the different strategies are shown and evaluated. Advantages and drawbacks of the developed electrohydraulic force compensation are discussed.
|
40 |
Gas assisted injection moulding : experiment and simulation : industrial machine experimental studies of the effect of process variables on gas bubble formation, and with simulation based upon a pseudo-concentration methodMulvaney-Johnson, Leigh January 2001 (has links)
The gas assisted injection moulding process is an important extension to conventional injection moulding. Gas assist can be applied in a number of ways, but here the penetration of a gas bubble through the polymer melt is of interest. A 3D fi nite element implementation of a pseudo concentration method is employed to simulate the primary penetration of the gas bubble. The wall thickness prediction is an important result since the extent of bubble penetration is sensitive to the remaining melt fraction. A number of methods for experimental measurement are developed to measure characteristics of the gas assisted injection moulding process dynamics and product. Key process variables, on an industrial gas-assist machine, were measured and analysed, leading to an empirical model for wall thickness prediction. Gas delay time and injection velocity are shown to be most influential in controlling residual wall thickness. Simulation results are evaluated against the empirical model. The trends observed, for simulation and experiment, in wall thickness after changes in process variable settings are found to agree qualitatively. The wall thickness prediction is found to be within 10% of the experimentally obtained measurements.
|
Page generated in 0.1037 seconds