Australia's space activities since the early sixties have been science-oriented and uncoordinated. As a result, Australia has been unable to develop a long-term sustainable domestic technological capability; with industry being dependent on government funding for its involvement in the nation's space plan. This thesis examines public policy aspects focussing on technology independence that is the building of competencies for the sustainable development of an industry. It compares national technological development by relating Australia's recent space-related successes and failures to those of other nations (especially selected Asian countries and Israel). The overarching research problem addressed within this thesis examined the Australian national space policy and strategy since 1984.It investigated why the Australian Space Industry Development Strategy was not a successful influence on the development of a long-term sustainable national technological base or on the establishment of a viable commercial space-related industry in Australia. The research included the development of a strategic multilevel planning system involving a network innovation model into a nation's space science and technology policy development. The outcomes of the research reported in the thesis are discussed. The level of technological capability and capacity is a direct, inversely related factor to an increase in the degree in technology dependency. Australia needs a change of philosophy by accepting the global challenge through defining and supporting, within a national strategic planning, a national space strategy that incorporates network innovation concepts: a concept that must involve a balanced supply (science) and demand (commercial) characteristics of an innovation network system. / Doctor of Philosophy (PhD) (Management)

The study of technological innovation covers a broad range of issues. Everything, from the public funding of science, research policy to the role of universities, from the business development of new products and services, the financing of innovation, institutional arrangements through to the spatially located conditions that promote innovation has been considered by analysts. Mostly these subject matters have been conceptualised as components of 'national’ systems of innovation even when studied at different spatial levels (including regions and clusters). The emphasis of systems research is that places (nations or localities), within the global economic landscape, are especially important for the creation, spread and use of innovations. The systems perspective on innovation encourages, due to results on the development of endogenous capabilities and the proximity of knowledge spillovers, a view that production and innovation geographies are enclaves of activity, innovating largely in isolation from what is occurring in other technologically isolated systems. A central concern in the present thesis is that this view of national and sub-national systems does not provide a sufficiently comprehensive perspective on the global architecture of production. The primary goal is to begin to develop an innovation systems framework that combines the consideration of the advantages of individual spatial entities (clusters) with an analysis of value chains as they extend across regional and national borders. To achieve this, the analysis focuses on evaluating the role, scale and spatial structure of inter-cluster linkages. The literature on role of interdependencies within clusters suggests that user producer and tacit knowledge flows are more important for innovation than traded interdependencies. To aid the analysis of the scale and spatial structure of interdependencies and rather than be restricted by case studies methods which would facilitate analysis of only one or two clusters, two inter-country input-output datasets covering nine OECD countries (33 sectors) and fifteen European Union countries (25 sectors) were developed for the research project. To analyse these datasets in a manner that was consistent with the goals of the research new modelling software was constructed. The analysis of these spatial structures reveals that substantial associations exist between some clusters, with most national clusters maintaining one important connection. The analysis reveals differences in the global architecture of production for assembly based systems (motor vehicles and aerospace) when compared to modular component based systems such as electronics and computing. Just as businesses form networks, then it seems reasonable, on the basis of the research presented here, to suggest that global production consists of networks of clusters which are organised in hierarchical circuits. This evidence supports the argument developed through the present thesis that certain elements of innovation systems can be better understood through a crossborder cluster-to-cluster framework / Doctor of Philosophy (PhD)

The dissolution profile of orally delivered drugs can be controlled through the use of osmotically controlled drug delivery devices. The most commonly used device is the osmotic tablet, which is essentially a tablet core that is coated with a rate-limiting semipermeable membrane. The feasibility of applying a coating onto a tablet using dense gas techniques was studied. Two different coating materials, polymethymethacrylate (PMMA, Mw = 120,000 g/mol) and cellulose acetate (CA, 39.8 wt% acetyl content) were applied onto an 8 mm osmotic tablet core using the Gas Anti-solvent (GAS) process. For PMMA, the pressurisation rate, coating temperature and volumetric expansion of up to 250% had minimal effect on the coating quality. The concentration, solvent type and the use of polyethylene glycol (Mw = 200 g/mol) had a more pronounced effect on the coating. The coating process was optimised to apply a smooth and uniform coating with a 50 ??m thickness. For CA, the pressurisation rate and the coating temperature had little effect on the coating that was applied. The process was more sensitive to a change in the concentration of the solution and the volumetric expansion that was used. It was found that the concentration could not be increased too much without affecting the coating quality. A CA coating was applied onto a PMMA-coated tablet using the optimised conditions. The thickness in the tablet coating increased by 10 ??m. Dissolution tests of the uncoated and coated tablets were carried out. The CA coatings were found to be insufficient in limiting the rate of water entering the tablet and performed similarly to an uncoated tablet core. The PMMA coatings were found to limit the rate of delivery of the model drug. However, variations in the PMMA coatings resulted in an inconsistent delivery profile across batches. The tablets coated with both PMMA and CA had a delivery rate in between that of uncoated and PMMA-coated tablets, indicating that the application of the second coating had compromised the initial PMMA coating.

By the year 2020 the number of aircraft will have increased substantially and will be in �Free Flight�(that is, ATC will be devolved to the aircraft rather than being ground based). As an aid to navigation a more advanced form of collision avoidance will be required. This thesis proposes a method of collision avoidance planning using Automatic Dependent Surveillance-Broadcast (ADS-B) and Dynamic Programming (DP). It in essence enables Air Traffic Control (ATC) from within the cockpit for remote or uncontrolled airspace and is a step toward Free Flight. Free Flight requires quite different strategies than those used in the present collision avoidance schemes. This thesis reviews the approaches to collision avoidance used in the Air traffic navigation and to similar problems in other industries. In particular it considers the extended problem of collision avoidance within the framework of path planning. This is a key departure from the approach to aircraft collision avoidance used in the industry to date. Path planning reflects the real goal of an aircraft, which is to reach a particular destination efficiently and safely. Dynamic Programming is one solution method used in other industries for the problem of path planning to avoid collisions with fixed obstacles. The solution proposed herein for the Aircraft case uses Dynamic Programming applied to the moving obstacle case. The problem is first simplified by assuming fixed (static) obstacles for the cost minimisation algorithms. These fixed obstacles are then moved with time and the minimisation process is repeated at each time increment. Although this method works well in most cases, situations can be constructed where this method fails, allowing a collision. A modified approach is then used, whereby the movement of obstacles is included more explicitly (by modifying the shapes of the obstacles to represent motion) in the cost minimisation algorithm and a safe manoeuvre distance for each aircraft is used (by expanding the object size), to allow space for aircraft to execute safe evasive manoeuvres in difficult cases. This modification allows solutions which are complete (with no known cases of failure � collision situations) and should be considered as an important extension to the current Aircraft and Collision Avoidance System (ACAS). The testing of these solutions is focussed on the most difficult cases, and includes aircraft movement in �real space� (that is simulations using real aircraft dynamics together with dynamic programming algorithms running in discrete time steps).

Human development has occurred against a timeline that has seen the creation of and diffusion of one innovation after another. These innovations range from language to complex computing and information technologies. The latter are assisting with the distribution of information, and extend to the distribution of the human species beyond the planet Earth. From early times, information has been published and mostly for a fee to the publisher. The absorption and use of information has had a high priority in most societies from early times, and has become institutionalised in universities and institutes of technical learning. For most in Western societies, education is now a matter of ‘lifelong learning’. Today, we see higher education institutions, worldwide, adapting their organisational structures and operating procedures and forming strategic alliances with communications content providers and carriers as well as with information technology companies. Modern educational institutes seek productivity and efficiency. Many also seek to differentiate themselves from competitors. Technological convergence is often seen by management to be a saviour in many educational organisations. It is hoped that lower capital and recurrent costs can be achieved, and that competitors in an increasingly globalised industry can be held at bay by strategic use of knowledge media (Eisenstadt, 1995) commonly associated with distance education in the campus setting. Knowledge media set up costs, intellectual property costs and training costs for staff and students are often so high as to make their use not viable for Australian institutes of higher education. Against this backdrop, one might expect greater educator and student use of publisher produced textbooks and digital enhancements to the textbook, particularly those involved in distance education. A major issue is whether or not the timing of instructor adoption of converging information technology and communications technologies aligns with the wishes of both higher education management and government, and with those who seek commercial gain from the diffusion and adoption of such technologies. Also at issue is whether or not it is possible to explain variance in stated intentions to recommend adoption of new learning technologies in higher education and implementation. Will there occur educator recommendation for adoption of individual knowledge media such as World Wide Web access to study materials by students? And what will be the form of this tool and others used in higher education? This thesis reports on more recent changes in the technological environment and seeks to contribute to an understanding of the factors that lead to a willingness, or unwillingness, on the part of higher education instructors, as influencers and content providers, to utilise these technologies. As such, it is a diffusion study which seeks to fill a gap in the literature. Diffusion studies typically focus on predicting adoption based on characteristics of the potential adopter. Few studies examine the relationship between characteristics of the innovation and adoption. Nearly all diffusion studies involve what is termed discontinuous innovation (Robertson, 1971). That is, the innovation involves adoptees in a major departure from previous practice. This study seeks to examine the relationship between previous experience of related technologies and adoption or rejection of dynamically continuous innovation. Continuous and dynamically continuous innovations are the most numerous in the real world, yet they are numerically the least scrutinised by way of academic research. Moreover, the three-year longitudinal study of educators in Australian and New Zealand meets important criteria laid down by researchers Tornatzky and Klein (1982) and Rogers (1995), that are often not met by similar studies. In particular the study examines diffusion as it is unfolding, rather than selectively examining a single innovation and after the fact, thus avoiding a possible pro-innovation bias. The study examines the situation for both ‘all educators’ and ‘marketing / management educators’ alone in seeking to meet the following aim: Establish if intended adopters of specific knowledge media have had more experience of other computer-based technologies than have those not intending to adopt said knowledge media. The analytical phase entails use of factor analysis and discriminant analysis to conclude that it is possible to discriminate adopters of selected knowledge media based on previous use of related technologies. The study does not find any generalised factor that enables such discrimination among educators. Thus the study supports the literature in part, but fails to find generalised factors that enable unambiguous prediction of knowledge media adoption or otherwise among each grouping of educators examined. The implications are that even in the case of related products and services (continuous or dynamically continuous innovation), there is not statistical certainty that prior usage of related products or technologies is related to intentions to use knowledge media in the future. In this regard, the present study might be said to confirm the view that Rogers and Shoemaker's (1971) conceptualisation of perceived innovation characteristics may only apply to discontinuous innovations (Stratton, Lumpkin & Vitell, 1997). The implications for stakeholders such as higher education management is that when seeking to appoint new educators or existing staff to knowledge media project teams, there is some support for the notion that those who already use World Wide Web based technologies are likely to take these technologies into teaching situations. The same claim cannot be made for computer software use in general, nor Internet use in general.

This dissertation is comprised of four distinct formulation sections, which are described below: A novel solid dosage formulation was investigated for achieving zero-order drug release profile by combining tablet shape design and tablet membrane film coating. Verapmail (model drug) was compressed into hydrophilic matrix tablet cores of flat-faced and bi-convex shape, which were encapsulated with membrane controlling film. The hydrophilic tablet core contained hydroxypropyl methylcellulose (HPMC) 15 LV, pectin, and Avecil��. The membrane film coating solution was comprised of deionized water, Opadry��, Surelease�� and talc. The combination of membrane film coating and tablet shape design was found to influence in vitro verapamil release profile towards the zero-order release demonstrated by the commercial Covera HS�� (Pharmacia). An alternative formulation for the commercial Bactroban�� (Smithkline Beacham) ointment 2% was developed. Both the texture and consistency of the new ointment were comparable to the Bactroban�� ointment. The new and the commercial formulations were found to be equivalent in drug release by the Bauer-Kirby test. Mupirocin remained unstable in the new formulation. Mg����� was added to help stabilize mupirocin and was shown to complex with mupirocin by nuclear magnetic resonance (NMR). The modified formulation including Mg����� however failed to stabilize mupirocin. The stability assay results showed an average of 67.2% mupirocin recovery along with 25.2% degradation products. A generic omeprazole formulation was developed, which was comprised of nonpareil core, omeprazole matrix layer, and an enteric locating layer of ammoniated hydroxypropyl methylcellulose phthalate (HPMCP) 55S. The new formulation was gastro-resistant in protecting against omeprazole degradation for up to 2 h, but failed to dissolve as rapidly as the commercial Prilosec�� (Astra Merk) in simulated intestinal fluid. The addition of expotab�� to the enteric coating layer failed to improve omeprazole dissolution rate. A novel hot-melt coating methodology utilizing direct blending technique has been developed. The processing steps for the direct blending hot-melt coating are: (a) Hot-melt system preparation; (b) Dispersion/dissolution of the active ingredient(s) in the hot-melt system; (c) Pre-heating of the coating substrate; and (d) Cooling and congealing of the hot-melt on substrate surface. Immunogenic effect was observed in mice administered with enteric-coated ragweed pollen extract (RPE) alpha fraction by the hot-melt coating encapsulation with direct blending method. The effect was not shown to be statistically significant. / Graduation date: 2003

Graduation date: 2000

Thesis (Ph.D.)--Hong Kong University of Science and Technology, 2007. / Includes bibliographical references. Also available in electronic version.

Thesis (D. Ed.)--University of Oregon, 2006. / Typescript. Includes vita and abstract. Includes bibliographical references (leaves 146-152). Also available for download via the World Wide Web; free to University of Oregon users.

The purpose of this thesis is to present and analyze the innovations in the home video game industry and their impact on the competitive strategies of the companies in the indus-try. The existing literature about business cycles and business dynamics is scarce from busi-ness administrative perspective. This thesis contributes to fill the gap in the academic literature. The choice of the home video game industry has been done, due to its fast growing economic nature and the rapid changes that can be noticed, especially for the last decade. A qualitative research method with secondary qualitative and quantitative data and primary qualitative data through interviews has been used for this thesis. The home video game industry is highly driven by technological product innovations. Incremental innovations do not affect in a significant way the dynamics within the industry. Radical innovations create a competitive advantage through differentiation and they increase market share for the company which followed this strategy. Disruptive innovations open new markets, change the business environment for every firm and generate a shift in consumer preferences. Hence, the company which implements a disruptive innovation gains extensive market share. Innovations are possible due to the strategic orientation a company aims to pursue. If a company pursues a high market orientation and a low inno-vation orientation it manufactures an upgraded product to keep customers satisfied. When the firm pursues a high market and innovation orientation, the final product includes cha-racteristics that the customers desire. While at the same time the product created offers services and features hard to be matched by the competition. Finally, if a firm pursues a high innovation orientation and a low market orientation strategy, it creates an easier and more convenient alternative on the existing products while being cheaper. At the same time this strategic orientation disregards the established customers' desires.The purpose of this thesis is to present and analyze the innovations in the home video game industry and their impact on the competitive strategies of the companies in the indus-try. The existing literature about business cycles and business dynamics is scarce from busi-ness administrative perspective. This thesis contributes to fill the gap in the academic litera-ture. The choice of the home video game industry has been done, due to its fast growing economic nature and the rapid changes that can be noticed, especially for the last decade. A qualitative research method with secondary qualitative and quantitative data and primary qualitative data through interviews has been used for this thesis.The home video game industry is highly driven by technological product innovations. Incremental innovations do not affect in a significant way the dynamics within the industry. Radical innovations create a competitive advantage through differentiation and they increase market share for the company which followed this strategy. Disruptive innovations open new markets, change the business environment for every firm and generate a shift in consumer preferences. Hence, the company which implements a disruptive innovation gains extensive market share. Innovations are possible due to the strategic orientation a company aims to pursue. If a company pursues a high market orientation and a low inno-vation orientation it manufactures an upgraded product to keep customers satisfied. When the firm pursues a high market and innovation orientation, the final product includes cha-racteristics that the customers desire. While at the same time the product created offers services and features hard to be matched by the competition. Finally, if a firm pursues a high innovation orientation and a low market orientation strategy, it creates an easier and more convenient alternative on the existing products while being cheaper. At the same time this strategic orientation disregards the established customers' desires.