This study presents the behavior of a precast skewed integral abutment bridge (IAB) using the recently developed NEXT-F Beam section in particular. In order to understand the bridge response, a 3-dimensional finite element model of a bridge (Brimfield Bridge) was developed to examine the thermal effect on the response of the bridge structural components. Eighteen months of field monitoring including abutments displacements, abutment rotations, deck strains, and beam strains was conducted utilizing 136 strain gauges, 6 crackmeters, and 2 tiltmeters. The behavior of the NEXT beams during construction was examined by conducting hand calculation considering all factors that could affect strain readings captured by strain gauges embedded in the 6 beams. Parametric analysis and model validation were conducted considering the effect of soil conditions, distribution of thermal loads, and the coefficient of thermal expansion used for the analyses. Using the validated model, the effect pile orientation was investigated. All the results and illustration plots are presented in detail in this study. As a result of this study, the behavior of the NEXT beams during construction was explained. Long term behavior of the bridge was also explained using field data and FE model. Furthermore, it was concluded that the coefficient of thermal expansion of concrete and temperature variation along the bridge depth and transverse direction can have a significant effect on the strain readings and calculated response, respectively. Lastly, it was found that orienting piles with their web perpendicular on the bridge centerline or with their web perpendicular to the abutment centerline will result in small ratio of moment demand to moment capacity.

No description available.

Integral abutment bridges are jointless bridges in which the deck is continuous and connected monolithically with the abutment walls supported typically by a single row of piles. This thesis focuses on the effects of two major parameters on the seismic behavior of an integral abutment bridge in Tennessee by considering soil-structure interaction around the piles and in back of the abutments: (1) clay stiffness (medium vs. hard) around the piles, and (2) level of sand compaction (loose vs. dense) of the abutment wall backfilling. Modal and nonlinear time history analyses are performed on a three dimensional detailed bridge model using the commercial software SAP2000, which clearly show that (1) compacting the backfilling of the abutment wall will increase the bridge dominant longitudinal natural frequency considerably more than increasing the clay stiffness around the piles; (2) the maximum deflection and bending moment in the piles under seismic loading will happen at the pile-abutment interface; (3) under seismic loading, densely-compacted backfilling of the abutment wall is generally recommended since it will reduce the pile deflection, the abutment displacement, the moments in the steel girder, and particularly the pile moments; (4) under seismic loading, when the piles are located in firmer clay, although the pile deflection, the abutment displacement, and the maximum girder moment at the pier and the mid-span will decrease, the maximum pile moment and the maximum girder moment at the abutment will increase.

Vibration-based damage detection (VBDD) comprises a family of non-destructive testing methods in which changes to dynamic characteristics are used to track the condition of a structure. Although VBDD methods have been successfully applied to various mechanical systems and to simple beam-like structures, significant challenges remain in extending this technology to complex, spatially distributed structures such as bridges. <p> In the present study, numerical simulations using a calibrated finite element model were used to investigate the use of VBDD methods to detect small-scale damage on a two-span, integral abutment overpass structure located in Saskatoon, Saskatchewan. The small scale damage was defined in this study as the removal of a concrete element from the top surface of the bridge deck, resembling the spalled clear cover of concrete deck of the overpass. Five different VBDD techniques were evaluated, including the Change in Mode Shape, Change in Flexibility, Change in Mode Shape Curvature, Change in Uniform Flexibility Curvature and Damage index methods. In addition, the influence of the size of damage, the orientation of damage geometry, sensor spacing (3 m, 5 m and 7.5 m), the approach used for mode shape normalization, and uncertainty in the measured mode shapes was investigated. <p> It was found that localized damage could be reliably detected and located if the sensors were located within 3 m of the damage (the distance between adjacent girders) and if uncertainty in the mode shapes was attenuated through the use of a sufficient number of repeated trials. Furthermore, studies using a limited sensor installation that could be achieved without interrupting the flow of traffic indicated that small scale damage could be detected and potentially located using sensors that are placed well away from the damaged area, provided uncertainty in mode shape was attenuated.

Vibration-based damage detection (VBDD) comprises a family of non-destructive testing methods in which changes to dynamic characteristics are used to track the condition of a structure. Although VBDD methods have been successfully applied to various mechanical systems and to simple beam-like structures, significant challenges remain in extending this technology to complex, spatially distributed structures such as bridges. <p> In the present study, numerical simulations using a calibrated finite element model were used to investigate the use of VBDD methods to detect small-scale damage on a two-span, integral abutment overpass structure located in Saskatoon, Saskatchewan. The small scale damage was defined in this study as the removal of a concrete element from the top surface of the bridge deck, resembling the spalled clear cover of concrete deck of the overpass. Five different VBDD techniques were evaluated, including the Change in Mode Shape, Change in Flexibility, Change in Mode Shape Curvature, Change in Uniform Flexibility Curvature and Damage index methods. In addition, the influence of the size of damage, the orientation of damage geometry, sensor spacing (3 m, 5 m and 7.5 m), the approach used for mode shape normalization, and uncertainty in the measured mode shapes was investigated. <p> It was found that localized damage could be reliably detected and located if the sensors were located within 3 m of the damage (the distance between adjacent girders) and if uncertainty in the mode shapes was attenuated through the use of a sufficient number of repeated trials. Furthermore, studies using a limited sensor installation that could be achieved without interrupting the flow of traffic indicated that small scale damage could be detected and potentially located using sensors that are placed well away from the damaged area, provided uncertainty in mode shape was attenuated.

A parametric study of single-span integral abutment bridge (IAB) was conducted using finite element analysis to explore the effects of various load conditions, bridge geometries, and soil properties. This study investigated the difference between the live load distribution of traditional jointed bridges and integral abutment bridges (IABs) under HL-93 truck component load. The results showed that AASHTO live load distribution factors (LLDFs) were overly conservative by up to 50% to use for IABs. LLDFs for IABs proposed by Dicleli and Erhan (2008) matched well for interior girder moment, but they were unconservative for exterior girder moment by up to 20% for the bridges studied. The study further investigated the effects of various parameters on the IAB responses under dead, live, and thermal loads and load combinations specified by AASHTO. The results of this study are limited to short to moderate single-span straight bridges under dead, live, and thermal loads. Due to a fixity of superstructure and abutments in IABs, the bridge response to each loading is influenced by the relative stiffness of superstructure to substructure. Under combined loads, the amount of each load effect varied depending on superstructure and substructure stiffness, but the critical load combination for each bridge response was determined in this study. Yielding of piles seems unavoidable for IABs built on sand under combined loads even after the change of pile size or pile orientation, but replacing the soil around top 3m (10ft) of piles with softer material is effective to reduce the significant amount of pile moment for IABs built on sand foundation soil. This thesis includes some design recommendations based on the findings of this study.

Short span bridges are commonly used throughout the United States to span small waterways and highway overpasses. New technologies in the civil engineering industry have aided in the creation of many unique designs of these short span highway bridges in efforts to decrease construction cost, decrease maintenance costs, increase efficiency, increase constructability, and increase safety. Three innovative systems, the Integral Abutment Bridge, “Bridge-in-a-Backpack”, and the Folded Plate Girder bridge will be analyzed to study how the bridges behave under various types of loading. Detailed finite element models were created for integral abutment bridges of varying geometry. These models are used to study how the live load distribution transversely across the bridge is effected by varying geometric properties and varying modeling techniques. These models will also be used to determine live load distribution factors for the integral abutment bridges and compare them to current American Association of State Highway and Transportation Officials specifications. The “Bridge-in-a-Backpack” and the Folded Plate Girder bridges were each constructed with a variety of instruments to measure the bridge movements. Readings from these instruments are used to determine the bridge response under various loading conditions. Bridges were analyzed during their construction process, during static live load testing, and during long term seasonal changes. The results from these studies will aid in the refinement of these innovative designs.