No description available.

In this research, we investigated a novel rigid-rod polymer sPBI for mono-layer polymer light emitting diode (PLED) fabrication and luminescence emission. sPBI could be a luminescent polymer with a low threshold voltage of 4.5 V and green light electroluminescence emission (530 nm). Its SO3H pendant attached to the p-phenyl ring improved electronic delocalization along the backbone resulted in a red shift of the absorption spectrum. By attaching propanesulfonated pendants to the heterocyclic moiety of intractable fully conjugated sPBI, water-soluble rigid-rod polyelectrolyte sPBI-PS(Li+) was synthesized to promote its processibility in water or common organic solvent. This water-soluble rigid-rod polyelectrolyte sPBI-PS(Li+) was fabricated for polymer light-emitting electrochemical cells (PLECs) with LiCF3SO3 (LiTf) or LiN(CF3SO2)2 (LiTfSI) dopants for investigating the influence of propanesulfonated pendants as well as dopants on the opto-electronic emission and the room-temperature DC conductivity. The effect of lithium salts (LiTf or LiTfSI) on photoluminescence color of doped sPBI-PS(Li+) films was negligible. sPBI-PS(Li+) PLECs doped with 0.41 and 1.01 wt. % of LiTfSI showed higher green light electroluminescence emission (514 nm) with a lower threshold voltage of 3.0 V and -4.6 V, respectively. Emission brightness of the sPBI-PS(Li+) PLEC did not raise upon increasing the ionic conductivity of the luminescent layer.

Glass materials surround us, impacting our lives on a daily basis, whether geologically deposited by volcanic activity or synthesized in large volume by industry. These amorphous oxide materials are vastly important due to their variety of applications including solid electrolytes, cookware, and storage of high-level nuclear waste. Although they are used for different applications, one common characteristic of these materials is the absence of long-range periodic order. This makes it difficult to use traditional solid-state characterization methods such as x-ray and neutron diffraction to study glass structure. Nuclear magnetic resonance (NMR), is ideally suited to study materials that exhibit short-range non-periodic order as it probes directly at a nucleus of interest and is sensitive to its local structural environment. This ability of solid-state NMR is illustrated by revealing local structural features in various oxide materials presented in this thesis. Within is a compilation of studies looking at basic borates, followed by borovanadates and complex borosilicate glasses. A multinuclear application of using quantum chemical calculations, single and double resonance methods and charge-balance models are discussed to deconvolute the complex structures of these disordered materials. This is followed by a study of a difficult low-gamma nucleus, 73Ge, (once considered “impossible” for solid-state NMR) which is explored for future material studies by looking at 73Ge NMR of crystalline and glassy germanates. 73Ge chemical shifts were related to coordination environments and quadrupolar coupling constants were related to bond length distortions.

Solid oxide fuel cells are considered as one of the main alternatives for future sources of clean energy. To further improve their performance, theoretical methods able to describe the diffusion process in candidate electrolyte materials at finite temperatures are needed. The method of choice for simulating systems at finite temperature is molecular dynamics. However, if the forces are calculated directly from the Schrödinger equation (first-principles molecular dynamics) the computational expense is too high to allow long enough simulations to properly capture the diffusion process in most materials. This thesis introduces a method to deal with this problem using an external force field to speed up the diffusion process in the simulation. The method is applied to study the diffusion of oxygen ions in Sm-doped ceria, which has showed promise in its use as an electrolyte. Good agreement with experimental data is demonstrated, indicating high potential for future applications of the method.

As the demand for clean and renewable energy sources continues to grow, much attention has been given to solid oxide fuel cells (SOFCs) due to their efficiency and low operating temperature. However, the components of SOFCs must still be improved before commercialization can be reached. Of particular interest is the solid electrolyte, which conducts oxygen ions from the cathode to the anode. Samarium-doped ceria (SDC) is the electrolyte of choice in most SOFCs today, due mostly to its high ionic conductivity at low temperatures. However, the underlying principles that contribute to high ionic conductivity in doped ceria remain unknown, and so it is difficult to improve upon the design of SOFCs. This thesis focuses on identifying the atomistic interactions in SDC which contribute to its favourable performance in the fuel cell. Unfortunately, information as basic as the structure of SDC has not yet been found due to the difficulty in experimentally characterizing and computationally modelling the system. For instance, to evaluate 10.3% SDC, which is close to the 11.1% concentration used in fuel cells, one must investigate 194 trillion configurations, due to the numerous ways of arranging the Sm ions and oxygen vacancies in the simulation cell. As an exhaustive search method is clearly unfeasible, we develop a genetic algorithm (GA) to search the vast potential energy surface for the low-energy configurations, which will be most prevalent in the real material. With the GA, we investigate the structure of SDC for the first time at the DFT+U level of theory. Importantly, we find key differences in our results from prior calculations of this system which used less accurate methods, which demonstrate the importance of accurately modelling the system. Overall, our simulation results of the structure of SDCagree with experimental measurements. We identify the structural significance of defects in the doped ceria lattice which contribute to oxygen ion conductivity. Thus, the structure of SDC found in this work provides a basis for developing better solid electrolytes, which is of significant scientific and technological interest. Following the structure search, we perform an investigation of the electronic properties of SDC, to understand more about the material. Notably, we compare our calculated density of states plot to XPS measurements of pure and reduced SDC. This allows us to parameterize the Hubbard (U) term for Sm, which had not yet been done. Importantly, the DFT+U treatment of the Sm ions also allowed us to observe in our simulations the magnetization of SDC, which was found by experiment. Finally, we also study the SDC surface, with an emphasis on its structural similarities to the bulk. Knowledge of the surface structure is important to be able to understand how fuel oxidation occurs in the fuel cell, as many reaction mechanisms occur on the surface of this porous material. The groundwork for such mechanistic studies is provided in this thesis.

Glass materials surround us, impacting our lives on a daily basis, whether geologically deposited by volcanic activity or synthesized in large volume by industry. These amorphous oxide materials are vastly important due to their variety of applications including solid electrolytes, cookware, and storage of high-level nuclear waste. Although they are used for different applications, one common characteristic of these materials is the absence of long-range periodic order. This makes it difficult to use traditional solid-state characterization methods such as x-ray and neutron diffraction to study glass structure. Nuclear magnetic resonance (NMR), is ideally suited to study materials that exhibit short-range non-periodic order as it probes directly at a nucleus of interest and is sensitive to its local structural environment. This ability of solid-state NMR is illustrated by revealing local structural features in various oxide materials presented in this thesis. Within is a compilation of studies looking at basic borates, followed by borovanadates and complex borosilicate glasses. A multinuclear application of using quantum chemical calculations, single and double resonance methods and charge-balance models are discussed to deconvolute the complex structures of these disordered materials. This is followed by a study of a difficult low-gamma nucleus, 73Ge, (once considered “impossible” for solid-state NMR) which is explored for future material studies by looking at 73Ge NMR of crystalline and glassy germanates. 73Ge chemical shifts were related to coordination environments and quadrupolar coupling constants were related to bond length distortions.

Made available in DSpace on 2014-10-09T12:46:40Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:56:06Z (GMT). No. of bitstreams: 1 07610.pdf: 4151963 bytes, checksum: 44edae9437590a9401a9113766dec153 (MD5) / Dissertacao (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP

Made available in DSpace on 2014-10-09T12:48:18Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:57:08Z (GMT). No. of bitstreams: 1 09307.pdf: 3599752 bytes, checksum: c720dc7c7bbb65919b1861882ea4796e (MD5) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Dissertacao (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP / FAPESP:01/08029-0

abstract: Fuel cells, particularly solid oxide fuel cells (SOFC), are important for the future of greener and more efficient energy sources. Although SOFCs have been in existence for over fifty years, they have not been deployed extensively because they need to be operated at a high temperature (∼1000 °C), are expensive, and have slow response to changes in energy demands. One important need for commercialization of SOFCs is a lowering of their operating temperature, which requires an electrolyte that can operate at lower temperatures. Doped ceria is one such candidate. For this dissertation work I have studied different types of doped ceria to understand the mechanism of oxygen vacancy diffusion through the bulk. Doped ceria is important because they have high ionic conductivities thus making them attractive candidates for the electrolytes of solid oxide fuel cells. In particular, I have studied how the ionic conductivities are improved in these doped materials by studying the oxygen-vacancy formations and migrations. In this dissertation I describe the application of density functional theory (DFT) and Kinetic Lattice Monte Carlo (KLMC) simulations to calculate the vacancy diffusion and ionic conductivities in doped ceria. The dopants used are praseodymium (Pr), gadolinium (Gd), and neodymium (Nd), all belonging to the lanthanide series. The activation energies for vacancy migration between different nearest neighbor (relative to the dopant) positions were calculated using the commercial DFT code VASP (Vienna Ab-initio Simulation Package). These activation energies were then used as inputs to the KLMC code that I co-developed. The KLMC code was run for different temperatures (673 K to 1073 K) and for different dopant concentrations (0 to 40%). These simulations have resulted in the prediction of dopant concentrations for maximum ionic conductivity at a given temperature. / Dissertation/Thesis / Ph.D. Materials Science and Engineering 2011

La synthèse et la caractérisation de nouvelles membranes à conduction protonique, pour pile à combustible à membrane échangeuse de proton, ont été réalisées. Une étude sur des molécules modèles a permis de mieux appréhender la stabilité thermique et électrochimique du polyéthersulfone sulfoné (S-PES). Des membranes à base de polyéthersulfone sulfoné greffés à l’octylamine (S-PESOS) et des membranes mixtes à base de S-PESOS et S-PES ont été caractérisées d’un point de vue physicochimique et électrochimique. L’effet de la réticulation chimique sur les propriétés des membranes a été évalué. Les membranes réticulées présentent des bonnes propriétés mécaniques, des conductivités ioniques et une stabilité chimique suffisantes pour être utilisées dans les piles à combustible à membrane échangeuse de proton. L’étude des propriétés de transport dans ces électrolytes acides a été approfondie en corrélant des mesures thermiques avec des mesures électrochimiques, thermodynamiques et les performances en pile. Mots clés: pile à combustible à membrane échangeuse de proton, conductivité ionique, taux de sulfonation, polyéthersulfone. / The synthesis and characterizations of new membranes with for proton exchange membrane fuel cell were carried out. Thermal and electrochemical stability of sulfonated polyethersulfone (S-PES) were studied. Sulfonated polyethersulfone grafted with octylamine (S-PESOS) membranes and binary S-PESOS and S-PES membranes were characterized from a physicochemical and electrochemical point of view. The effect of chemical cross-linking on the membrane properties was evaluated. The cross-linked membranes showed sufficient mechanical properties, ionic conductivities and chemical stability to be used as electrolyte in the proton exchange membrane fuel cell. The proton transport mechanisms, in this acid electrolyte, were deepened correlating thermal and electrochemical properties, thermodynamic measurements and fuel cells performances.