Spelling suggestions: "subject:"janus artikel"" "subject:"janus basisartikel""
1 |
Role of thermo-osmotic flows at low Reynolds numbers for particle driving and collective motionBregulla, Andreas Paul 11 July 2016 (has links) (PDF)
The main subject of this thesis is to examine thermo-osmotic flows, which occur on interfaces of non-uniform temperature. Such thermo-osmotic flows are purely non-thermal equilibrium phenomena. Along the non-isothermal interface, specific interaction of a liquid and its solutes with a boundary vary in strength across the interface, according to the local temperature. This boundary can be a solid, a membrane or a phase boundary. The flow is thereby continuously pumping fluid across the interface in direction of the local temperature gradient, resulting in an extended flow pattern in the bulk due to mass conservation. In a system containing particles and heat sources in a liquid under spatial confinement, the thermo-osmotic flow may drive particles in a directed manner, or can lead to collective phenomena. To approach this broad topic of (self-)thermophoresis and collective motion of active particles and quantify the role of the thermo-osmotic flow upon the latter effects, different experiments have been performed:
The first experiments aim to quantify the thermo-osmotic flow at a non-isothermal liquid/solid interface for two fundamentally different substrate properties. Further, the bulk flow was investigated for two different systems. The form and spatial extension of this bulk flow pattern depends sensitively on the form of the container and the interface, as well as on the thermo-osmotic flow. The first system is a liquid film confined between two planar glass cover slips. The second case is a Janus particle immobilized on one of the glass slips. In the first case, the non-uniform temperature profile is generated by optical heating of a nanometer sized gold colloid, and in the second case, the heat source is the Janus particle. The bulk flow pattern consists, for the second case, of the flow pattern created by the glass cover slips and the one created by the Janus particle.
The following experiments are focusing on the dynamics of mobile self-thermophoretic Janus particles. In particular, their dynamics and the contributions of the thermo-osmotic flow to the interaction of multiple active particles are investigated. To investigate those particles under controlled conditions and examine their interactions at low concentrations for an effectively unlimited amount of time, a real-time feedback algorithm was co-developed to gain control of the motion of multiple active particles simultaneously, called ”photon nudging”. With the help of this method, first experiments have been performed to quantify the dynamics of a Janus particle located close to a heat source.
|
2 |
Stimuli-Responsive Janus ParticlesKirillova, Alina 19 April 2016 (has links) (PDF)
Janus particles, named after the two faced Roman god Janus, possess unique asymmetry and combine two distinct functions at their opposite sides, allowing them to target complex self-assembled architectures and materials inaccessible for homogeneous building blocks. In this study, three areas regarding the topic of Janus particles were explored: the synthesis of Janus particles, their (self-) assembly, and applications.
In the first part of the work, we have drawn our attention to the optimization of the synthetic procedures concerning the preparation of Janus particles and to the extending of the current Janus particle library by adding new geometries to the list. In the case of spherical Janus particles, we have developed an easy approach to tailor the Janus ratio of the resulting particles, thus, extending the possibilities of the Pickering emulsion approach for the creation of a variety of Janus particle architectures. Additionally, a new methodology was employed to measure directly and in situ the position/contact angle of the prepared Janus particles with different Janus ratios at a water-oil interface. It was further concluded that having simply two different functionalities on a particle surface does not necessarily imply amphiphilic behavior: only in the case of large wettability contrasts our particles were in a true Janus regime. In the case of platelet-like Janus particles, we have developed a completely new approach for their large-scale synthesis, which involved a reduced number of steps compared to the spherical Janus particles.
In the second part of the work, the assembly behavior of various kinds of functional spherical Janus particles was investigated depending on the nature of the Janus particles and the surrounding media conditions. Oppositely charged, uncharged amphiphilic, and charged amphiphilic Janus particles were fabricated comprising different responsive polymers on their surface, and their assembly was investigated depending on the pH value of the dispersion, the ionic strength, or the solvent. It was found that, under specific conditions, the Janus particles formed hierarchical chain-like structures in solutions, which were not observed in the case of the homogeneous particle mixtures. The obtained results indicate that the fundamental understanding of the Janus particle assembly mechanisms is crucial for the programmed formation of desired structures.
In the third part of the work, we have focused on the applications of our developed hybrid hairy Janus particles and proposed two main directions that would benefit from the unique properties or architecture of the Janus particles. The first direction is based on the exploitation of the superior interfacial activity of the Janus particles and their use for interfacial catalysis. The second proposed direction for the application of Janus particles is based on their use as building blocks for functional structured surfaces. The prepared surfaces were thoroughly characterized and tested for their performance toward anti-icing as well as anti-fouling applications. Ultimately, the developed functional surfaces based on Janus particles as building blocks are very promising for their future application in the coating technology.
|
3 |
Stimuli-Responsive Janus Particles: Design and Investigation of their Self-Assembly in Bulk and at InterfacesKirillova, Alina 06 April 2016 (has links)
Janus particles, named after the two faced Roman god Janus, possess unique asymmetry and combine two distinct functions at their opposite sides, allowing them to target complex self-assembled architectures and materials inaccessible for homogeneous building blocks. In this study, three areas regarding the topic of Janus particles were explored: the synthesis of Janus particles, their (self-) assembly, and applications.
In the first part of the work, we have drawn our attention to the optimization of the synthetic procedures concerning the preparation of Janus particles and to the extending of the current Janus particle library by adding new geometries to the list. In the case of spherical Janus particles, we have developed an easy approach to tailor the Janus ratio of the resulting particles, thus, extending the possibilities of the Pickering emulsion approach for the creation of a variety of Janus particle architectures. Additionally, a new methodology was employed to measure directly and in situ the position/contact angle of the prepared Janus particles with different Janus ratios at a water-oil interface. It was further concluded that having simply two different functionalities on a particle surface does not necessarily imply amphiphilic behavior: only in the case of large wettability contrasts our particles were in a true Janus regime. In the case of platelet-like Janus particles, we have developed a completely new approach for their large-scale synthesis, which involved a reduced number of steps compared to the spherical Janus particles.
In the second part of the work, the assembly behavior of various kinds of functional spherical Janus particles was investigated depending on the nature of the Janus particles and the surrounding media conditions. Oppositely charged, uncharged amphiphilic, and charged amphiphilic Janus particles were fabricated comprising different responsive polymers on their surface, and their assembly was investigated depending on the pH value of the dispersion, the ionic strength, or the solvent. It was found that, under specific conditions, the Janus particles formed hierarchical chain-like structures in solutions, which were not observed in the case of the homogeneous particle mixtures. The obtained results indicate that the fundamental understanding of the Janus particle assembly mechanisms is crucial for the programmed formation of desired structures.
In the third part of the work, we have focused on the applications of our developed hybrid hairy Janus particles and proposed two main directions that would benefit from the unique properties or architecture of the Janus particles. The first direction is based on the exploitation of the superior interfacial activity of the Janus particles and their use for interfacial catalysis. The second proposed direction for the application of Janus particles is based on their use as building blocks for functional structured surfaces. The prepared surfaces were thoroughly characterized and tested for their performance toward anti-icing as well as anti-fouling applications. Ultimately, the developed functional surfaces based on Janus particles as building blocks are very promising for their future application in the coating technology.
|
4 |
Microswimmer-driven agglutination assaySandoval Bojorquez, Diana Isabel 07 August 2020 (has links)
Lab-on-a-chip systems for point-of-care testing demonstrate a promising development towards more accurate diagnostic tests that are of extreme importance for the future global health. This work presents an agglutination assay performed in micrometer sized well using Janus PS/Ag/AgCl micromotors to enhance the interactions between goat anti-human IgM functionalized particles and Human IgM. The fabricated microwell chips are a suitable platform to analyze the interaction between different particles and to perform the agglutination assays. The interaction between active Janus particles and passive and functionalized particles is studied, as well as the influence of ions on the motion of the Janus particles. Agglutination assays are performed with and without the presence of Janus particles, and in different PBS concentrations. Once illuminated with blue light, passive SiO2 particles were effectively excluded from Janus particles, while SiO2 NH2 particles revealed attraction. In contrast, functionalized SiO2 NH2 Ab particles suspended in PBS did not show any interaction. It was found that the optimal working conditions for antibodies and Janus particles differed and, as a result, the Janus particles did not reveal a desirable interaction between the functionalized particles and IgM. Further experiments should be performed to find the proper conditions in which the antibodies and the Janus particles maintain their activities. It is believed that an effective interaction between the functionalized and Janus particles could be achieved by modifying the parameters that affect their interaction such as the zeta potential and the medium in which the assay is being performed. This preliminary work provides the first steps towards the development of a fully integrated lab on a chip system for point of care testing.:Abstract ........................................................................................................................ iii
Acknowledgments.......................................................................................................... v
Table of Contents .......................................................................................................... vi
List of Tables ............................................................................................................. viii
List of Figures ............................................................................................................... ix
Abbreviations ................................................................................................................. x
1. Introduction ............................................................................................................ 1
1.1 In vitro diagnostic tests ........................................................................................ 1
1.1.1 Point-of-care tests ......................................................................................... 2
1.2 Agglutination assay .............................................................................................. 2
1.3 Lab-on-a-chip ....................................................................................................... 5
1.4 Self-propelled particles ........................................................................................ 6
1.4.1 Light-driven Ag/AgCl micromotors ............................................................. 6
1.5 Aim ...................................................................................................................... 9
2. Materials and Methods ......................................................................................... 11
2.1 Microwell fabrication .................................................................................... 11
2.2 Microswimmers fabrication .......................................................................... 12
2.3 Functionalization of particles ........................................................................ 12
2.4.1 Scanning electron microscope ............................................................... 14
2.4.2 UV-vis spectroscopy .............................................................................. 14
2.4.3 Zeta potential ......................................................................................... 14
2.4.4 Optical microscopy ................................................................................ 15
2.5 Motion Experiments ...................................................................................... 15
2.6 Agglutination assay ....................................................................................... 16
2.7 Effect of PBS ................................................................................................. 16
2.7.1 Janus particles ........................................................................................ 16
2.7.2 Agglutination assay ................................................................................ 17
2.7.3 Exclusion of functionalized particles ..................................................... 17
3. Results and Discussion ........................................................................................ 18
3.1 Microwell chip with integrated Janus particles ................................................. 18
3.2 Characterization of particles .............................................................................. 19
3.2.1 UV-vis spectroscopy ................................................................................... 19
3.2.2 Zeta potential .............................................................................................. 21
3.2.3 Agglutination assay in PEG-covered glass slides ....................................... 22
3.3 Motion experiments ........................................................................................... 23
3.3.1 Exclusion time ............................................................................................ 23
3.3.2 On/off light cycles....................................................................................... 26
3.4 Agglutination assay ............................................................................................ 28
3.4.1 Assay performed in wells............................................................................ 28
3.4.2 Assay performed in wells with Janus particles ........................................... 29
3.5 Effect of PBS concentration............................................................................... 30
3.5.1 Janus particles ............................................................................................. 30
3.5.2 Agglutination assay ..................................................................................... 32
3.5.3 Exclusion of functionalized particles .......................................................... 33
4. Conclusions .......................................................................................................... 35
References .................................................................................................................... 37
Declaration of Research Integrity and Good Scientific Practice ................................. 42
|
5 |
Programmed assembly of oppositely charged homogeneously decorated and Janus particlesKirillova, Alina, Stoychev, Georgi, Synytska, Alla 02 September 2020 (has links)
The exploitation of colloidal building blocks with morphological and functional anisotropy facilitates the generation of complex structures with unique properties, which are not exhibited by isotropic particle assemblies. Herein, we demonstrate an easy and scalable bottom-up approach for the programmed assembly of hairy oppositely charged homogeneously decorated and Janus particles based on electrostatic interactions mediated by polyelectrolytes grafted onto their surface. Two different assembly routes are proposed depending on the target structures: raspberry-like/half-raspberry-like or dumbbell-like micro-clusters. Ultimately, stable symmetric and asymmetric microstructures could be obtained in a well-controlled manner for the homogeneous–homogeneous and homogeneous–Janus particle assemblies, respectively. The spatially separated functionalities of the asymmetric Janus particle-based micro-clusters allow their further assembly into complex hierarchical constructs, which may potentially lead to the design of materials with tailored plasmonics and optical properties.
|
6 |
Role of thermo-osmotic flows at low Reynolds numbers for particle driving and collective motionBregulla, Andreas Paul 20 June 2016 (has links)
The main subject of this thesis is to examine thermo-osmotic flows, which occur on interfaces of non-uniform temperature. Such thermo-osmotic flows are purely non-thermal equilibrium phenomena. Along the non-isothermal interface, specific interaction of a liquid and its solutes with a boundary vary in strength across the interface, according to the local temperature. This boundary can be a solid, a membrane or a phase boundary. The flow is thereby continuously pumping fluid across the interface in direction of the local temperature gradient, resulting in an extended flow pattern in the bulk due to mass conservation. In a system containing particles and heat sources in a liquid under spatial confinement, the thermo-osmotic flow may drive particles in a directed manner, or can lead to collective phenomena. To approach this broad topic of (self-)thermophoresis and collective motion of active particles and quantify the role of the thermo-osmotic flow upon the latter effects, different experiments have been performed:
The first experiments aim to quantify the thermo-osmotic flow at a non-isothermal liquid/solid interface for two fundamentally different substrate properties. Further, the bulk flow was investigated for two different systems. The form and spatial extension of this bulk flow pattern depends sensitively on the form of the container and the interface, as well as on the thermo-osmotic flow. The first system is a liquid film confined between two planar glass cover slips. The second case is a Janus particle immobilized on one of the glass slips. In the first case, the non-uniform temperature profile is generated by optical heating of a nanometer sized gold colloid, and in the second case, the heat source is the Janus particle. The bulk flow pattern consists, for the second case, of the flow pattern created by the glass cover slips and the one created by the Janus particle.
The following experiments are focusing on the dynamics of mobile self-thermophoretic Janus particles. In particular, their dynamics and the contributions of the thermo-osmotic flow to the interaction of multiple active particles are investigated. To investigate those particles under controlled conditions and examine their interactions at low concentrations for an effectively unlimited amount of time, a real-time feedback algorithm was co-developed to gain control of the motion of multiple active particles simultaneously, called ”photon nudging”. With the help of this method, first experiments have been performed to quantify the dynamics of a Janus particle located close to a heat source.
|
7 |
Ferromagnetic colloidal particles with anisotropic magnetization distribution: self-assembly and response to magnetic fields / Ferromagnetische kolloidale Partikel mit anisotroper Magnetisierungsverteilung: Selbstassemblierung und Verhalten unter magnetischen FeldernSteinbach, Gabi 01 August 2016 (has links) (PDF)
Systems of interacting colloidal particles are ideal tools for studies of pattern formation and collective non-equilibrium dynamics on the mesoscopic scale. These processes are governed by the interaction between the particles, which can be tuned by sophisticated fabrication. In this thesis, self-assembly of artificially designed magnetic spheres dispersed in water has been studied via video microscopy. The particles are based on silica microspheres with hemispherical ferromagnetic coating of [Co/Pd] multilayers with perpendicular magnetic anisotropy. These particles are exceptional in that they exhibit an off-centered net magnetic moment and yet obey rotational and mirror symmetry. It has been demonstrated how these magnetic properties provide innovative flexibility in pattern formation and collective dynamics based on magnetostatic interactions on the mesoscopic scale. The results are supported by analytical and numerical calculations of interacting spheres with radially shifted point dipoles (sd-particles).
In two dimensions, the particles spontaneously self-assemble into branched structures as a result of a bistable assembly behavior where neighboring particles exhibit a non-collinear magnetic orientation. It has been shown that these features, which are atypical for homogeneous systems of magnetic particles, can be reproduced by simulation. It employs a theoretical model of a sphere that contains a distribution of three radially shifted point dipoles in analogy to the magnetization distribution in the coated particles.
The stability of the assembly has been examined further by external manipulation using optical tweezers and homogeneous magnetic fields. A rich variety of stable structures with diverse spatial and magnetic ordering has been found. Particularly, the collective alignment of the specially designed particles in external fields opens completely new possibilities for the remote control over reversible pattern formation on the micrometer scale. In time-dependent fields, the collective dynamics of the anisotropic particles has revealed a novel approach for magnetically actuated translation. The variety of stable structures particularly enables control over this motion. / Kolloidale Suspensionen sind geeignete Systeme zur Untersuchung von Strukturbildung und kollektiver Nichtgleichgewichtsdynamik in mesoskopischen Größenskalen. Diese Vorgänge werden durch die Wechselwirkung zwischen den Teilchen bestimmt, welche durch geeignete Partikelherstellung angepasst werden kann. In der vorliegenden Arbeit wird ein System von künstlich hergestellten magnetischen Partikelsuspensionen mittels Videomikroskopie untersucht. Quarzglas-Mikrokugeln wurden halbseitig mit einer ferromagnetischen Dünnschicht aus [Co/Pd] Multilagen mit senkrechter Anisotropie beschichtet. Solche Partikel sind ausgezeichnet durch ein resultierendes magnetisches Moment mit Rotations- und Spiegelsymmterie, welches zusätzlich vom Mittelpunkt der Kugel verschoben ist. Die vorliegende Arbeit zeigt, dass diese Besonderheit zu einer bisher unbekannten Flexibilität bei der mesoskopischen Strukturbildung und der kollektiven Dynamik auf der Basis magnetostatischer Wechselwirkung führt. Die vorgestellten Ergebnisse werden durch analytische und numerische Berechnungen unterstützt, denen ein Modell einer idealen Kugel mit verschobenem Dipol zugrunde liegt.
Die zweidimensionale Selbstanordnung der Partikel zeigt experimentell zwei stabile Formen der Verknüpfung, welche zu verzweigten Strukturen mit unterschiedlich magnetischer Ausrichtung benachbarter Partikel führen. Diese für ein homogenenes System magnetischer Partikel außergewöhnlichen Eigenschaften konnten in Simulationen durch ein Modellsystem aus Kugeln mit drei verschobenen Punktdipolen reproduziert werden.
Darüber hinaus wurde die spontante Anordnung unter externer Manipulation mittels optischer Pinzette und magnetischen Feldern untersucht. Es konnte eine Vielfalt an stabilen Strukturen mit verschiedenen magnetischen und strukturellen Anordnungen gefunden werden. Insbesondere die kollektive Ausrichtung dieser Partikel in externen Feldern eröffnet neuartige Möglichkeiten, kontrolliert und reversibel Mikrostrukturen zu erzeugen. In zeitabhängigen Feldern zeigen die anisotropen Partikel zusätzlich eine kollektive Dynamik welche eine neue Möglichkeit zum magnetischen Antrieb von Partikelagglomeraten eröffnet. Die Vielfalt der möglichen stabilen Strukturen erlaubt es in besonderer Weise diese Bewegung zu steuern.
|
8 |
Ferromagnetic colloidal particles with anisotropic magnetization distribution: self-assembly and response to magnetic fieldsSteinbach, Gabi 10 May 2016 (has links)
Systems of interacting colloidal particles are ideal tools for studies of pattern formation and collective non-equilibrium dynamics on the mesoscopic scale. These processes are governed by the interaction between the particles, which can be tuned by sophisticated fabrication. In this thesis, self-assembly of artificially designed magnetic spheres dispersed in water has been studied via video microscopy. The particles are based on silica microspheres with hemispherical ferromagnetic coating of [Co/Pd] multilayers with perpendicular magnetic anisotropy. These particles are exceptional in that they exhibit an off-centered net magnetic moment and yet obey rotational and mirror symmetry. It has been demonstrated how these magnetic properties provide innovative flexibility in pattern formation and collective dynamics based on magnetostatic interactions on the mesoscopic scale. The results are supported by analytical and numerical calculations of interacting spheres with radially shifted point dipoles (sd-particles).
In two dimensions, the particles spontaneously self-assemble into branched structures as a result of a bistable assembly behavior where neighboring particles exhibit a non-collinear magnetic orientation. It has been shown that these features, which are atypical for homogeneous systems of magnetic particles, can be reproduced by simulation. It employs a theoretical model of a sphere that contains a distribution of three radially shifted point dipoles in analogy to the magnetization distribution in the coated particles.
The stability of the assembly has been examined further by external manipulation using optical tweezers and homogeneous magnetic fields. A rich variety of stable structures with diverse spatial and magnetic ordering has been found. Particularly, the collective alignment of the specially designed particles in external fields opens completely new possibilities for the remote control over reversible pattern formation on the micrometer scale. In time-dependent fields, the collective dynamics of the anisotropic particles has revealed a novel approach for magnetically actuated translation. The variety of stable structures particularly enables control over this motion. / Kolloidale Suspensionen sind geeignete Systeme zur Untersuchung von Strukturbildung und kollektiver Nichtgleichgewichtsdynamik in mesoskopischen Größenskalen. Diese Vorgänge werden durch die Wechselwirkung zwischen den Teilchen bestimmt, welche durch geeignete Partikelherstellung angepasst werden kann. In der vorliegenden Arbeit wird ein System von künstlich hergestellten magnetischen Partikelsuspensionen mittels Videomikroskopie untersucht. Quarzglas-Mikrokugeln wurden halbseitig mit einer ferromagnetischen Dünnschicht aus [Co/Pd] Multilagen mit senkrechter Anisotropie beschichtet. Solche Partikel sind ausgezeichnet durch ein resultierendes magnetisches Moment mit Rotations- und Spiegelsymmterie, welches zusätzlich vom Mittelpunkt der Kugel verschoben ist. Die vorliegende Arbeit zeigt, dass diese Besonderheit zu einer bisher unbekannten Flexibilität bei der mesoskopischen Strukturbildung und der kollektiven Dynamik auf der Basis magnetostatischer Wechselwirkung führt. Die vorgestellten Ergebnisse werden durch analytische und numerische Berechnungen unterstützt, denen ein Modell einer idealen Kugel mit verschobenem Dipol zugrunde liegt.
Die zweidimensionale Selbstanordnung der Partikel zeigt experimentell zwei stabile Formen der Verknüpfung, welche zu verzweigten Strukturen mit unterschiedlich magnetischer Ausrichtung benachbarter Partikel führen. Diese für ein homogenenes System magnetischer Partikel außergewöhnlichen Eigenschaften konnten in Simulationen durch ein Modellsystem aus Kugeln mit drei verschobenen Punktdipolen reproduziert werden.
Darüber hinaus wurde die spontante Anordnung unter externer Manipulation mittels optischer Pinzette und magnetischen Feldern untersucht. Es konnte eine Vielfalt an stabilen Strukturen mit verschiedenen magnetischen und strukturellen Anordnungen gefunden werden. Insbesondere die kollektive Ausrichtung dieser Partikel in externen Feldern eröffnet neuartige Möglichkeiten, kontrolliert und reversibel Mikrostrukturen zu erzeugen. In zeitabhängigen Feldern zeigen die anisotropen Partikel zusätzlich eine kollektive Dynamik welche eine neue Möglichkeit zum magnetischen Antrieb von Partikelagglomeraten eröffnet. Die Vielfalt der möglichen stabilen Strukturen erlaubt es in besonderer Weise diese Bewegung zu steuern.
|
Page generated in 0.0514 seconds