Spelling suggestions: "subject:"tet engine."" "subject:"beet engine.""
41 |
Design of a permanent magnet axial flux high-speed generatorEl-Hasan, Tareq Sadeq Fawzi January 2002 (has links)
Electrical generating sets powered by gas turbines are required for many applications, in particular for emergency situations due to their critical attributes; high reliability, lightweight, small size, multi-fuel capabilities, low maintenance, low noise and low gas emissions. This research contends that a permanent magnet axial flux (PMAF) high-speed generator with a small gas turbine engine offers advantages over the radial flux permanent magnet generators. Higher power densities can be achieved with the axial flux configuration when compared to their counter parts of the radial flux machines of similar output power. The attributes of the PMAF machines were certainly appealing; lightweight, small size, high efficiency and ease of construction. In this research, a design approach for the PMAF high-speed generator which accounts for the mechanical and electrical aspects was provided. The machine's key components such as retainment ring was carefully designed and the materials utilised in their structures were appropriately selected to insure high mechanical integrity, ease of construction and low manufacturing cost. The generator's principle dimensions were determined from a theoretical model which was derived from the machine's main design parameters. This theoretical model was then correlated by some empirical coefficients determined through the manipulation of the experimentally validated finite element (FE) results. The analytical results have shown that with the appropriate design considerations, PMAF high-speed generators can be designed with high power densities in the range of 6-8 kW/kg and high efficiencies ideally in the range of 94 - 96 %. The mechanical integrity and the steady state electrical performance of the machine were analysed using three-dimensional (3D) FE models. More in this research, a parametric study was carried out on the most influential parameters of the machine to improve its electrical performance through minimise rotor and stator eddy current losses. In addition, the total harmonic distortion in the output waveform was minimised through the appropriate and careful design of the magnet shape and topology with the aid of 3D electromagnetic FE analysis. Furthermore, using FE it was possible to design, optimise and analyse the rotor back-iron disc through the selection of best material, shape and size for use in the PMAF high-speed generator. A prototype of the PMAF high-speed generator was constructed and tested preliminary at low speed for the purpose of the evaluation of the electrical performance of the machine. Experimental results have shown that the machine was capable to meet the design requirements. For the mechanical integrity of the machine, the rotors were safely tested on a cold run test rig at the speed of 47,000 rpm. This thesis describes also the trends and the technical details in the manufacturing, construction and experimental setup for the PMAF high-speed generator.
|
42 |
Design and construction of a small gas turbine to drive a permanent magnet high speed generatorEbaid, Munzer Shehadeh Yousef January 2002 (has links)
Radial gas turbines engines have established prominence in the field of small turbomachinery because of their simplicity, relatively high performance and installation features. Thus they have been used in a variety of applications such as generator sets, small auxiliary power units (APu), air conditioning of aircraft cabins and hybrid electric vehicles turbines. The current research describes the design, manufacturing, construction and testing a radial type small gas turbine. The aim was to design and build the engine to drive directly a high-speed permanent magnet alternator running at 60000 rpmand developing a maximum of 60 W. This direct coupling arrangement produces a portable, light, compact, reliable and environment friendly power generator. These features make the generator set very attractive to use in many applications including emergency power generation for hospitals, in areas of natural disasters such as floods and earthquakes, in remote areas that cannot be served from the national grid, oil rigs, and in confined places of limited spaces. It is important to recognize that the design of the main components, that is, the inward flow radial UFR turbines, the centrifugal compressor and the combustion chamber involve consideration of aero-dynamics, thermodynamics, fluid mechanics, stress analysis, vibration analysis, selection of bearings, selection of suitable materials and the requirements for manufacturing. These considerations are all inter-linked and a procedure has been followed to reach an optimum design. This research was divided into three phases: phase I dealt with the complete design of the inward radial turbine, the centrifugal compressor, the power transmission shaft, the selection of combustion chamber and the bearing housing including the selection of bearings. Phase 2 dealt with mechanical consideration of the rotating components that is stress, thermal and vibration analyses of the turbine rotor, the impeller and the rotating shaft, respectively. Also it dealt with the selection of a suitable fuel and oil lubrication systems and a suitable starting system. Phase 3 dealt with the manufacturing of the gas turbine components, balancing the rotating components, assembling the engine and finally commissioning and then testing the engine. The current work in this thesis has put the light on a new design methodology on determining the optimum principal dimensions of the rotor and the impeller. This method, also, has defined the optimum number of blades and the axial length of the rotor and the impeller. Mathematical models linking the performance parameters and the design variables for the turbine and the compressor have been developed to assist in carrying out parametric studies to study the influence of the design parameters on the performance and on each other. Also, a new graphical matching procedure has been developed for the gas turbine components. This technique can serve as a valuable tool to determine the operating range and the engine running line. Furthermore, it would decide whether the gas turbine engine operates in a region of satisfactory compressor and turbine efficiencies.
|
43 |
High fidelity open rotor noise predictionThomas, Paul Huw January 2017 (has links)
As improving the performance of turbofan designs becomes increasingly difficult, manufacturers are looking to new technologies for the next generation of jet engines. An 'open rotor' replaces the fan of the turbofan with a set of external rotors. This has the potential to offer a significant improvement in propulsive efficiency, but the design for low noise is a key challenge. Hence, high fidelity noise prediction methods are needed to accurately predict and compare the noise of different designs. This thesis focuses on one set of methods based on the Ffowcs Williams-Hawkings (\fwh) equation. This equation is considered to be the most realistic description of aeroacoustic noise generation, as it is a direct rearrangement of the Navier-Stokes equations. The \fwh\ equation is difficult to solve for realistic test cases such as an open rotor, and is susceptible to several types of error. This thesis categorises these errors as ``input'', ``neglection'' and ``discretisation'' errors. Discretisation errors arise from the need to integrate a discretised source field for the total noise, neglection errors result from needing to ignore part of the source field for practical reasons, and input errors relate to any errors caused by inaccurate input to the solver. The fundamental motivation of this thesis is to advance the understanding of neglection and discretisation errors and how they can be mitigated, in order to develop best practice solvers and methodologies for application to open rotors. Dimensional analysis is combined with analytical flow solutions to develop a process for isolating and quantifying discretisation errors. This process is used to study a wide range of solver methodologies and select a best practice solver methodology for open rotor noise prediction. This first-of-a-kind study produces a solver methodology that reduces discretisation errors by an order of magnitude compared to an industry standard solver. Previous research into neglection errors has shown that avoiding density perturbations in acoustic source terms can be beneficial. This thesis uses a generic aeroacoustic analogy to provide a new, physically intuitive method of incorporating a surface discontinuity that enables density perturbations to be avoided in a far more elegant manner than previous research. The above method improvements are investigated using a modern open rotor rig test case. The results demonstrate that discretisation and neglection errors can be severe in realistic cases and the potential of the method improvements to significantly mitigate them.
|
44 |
Three-dimensional transient numerical study of hot-jet ignition of methane-hydrogen blends in a constant-volume combustorKhan, Md Nazmuzzaman January 2015 (has links)
Indiana University-Purdue University Indianapolis (IUPUI) / Ignition by a jet of hot combustion product gas injected into a premixed combustible mixture from a separate pre-chamber is a complex phenomenon with jet
penetration, vortex generation, flame and shock propagation and interaction. It has
been considered a useful approach for lean, low-NOx combustion for automotive engines, pulsed detonation engines and wave rotor combustors. The hot-jet ignition
constant-volume combustor (CVC) rig established at the Combustion and Propulsion
Research Laboratory (CPRL) of the Purdue School of Engineering and Technology
at Indiana University-Purdue University Indianapolis (IUPUI) is considered for numerical study. The CVC chamber contains stoichiometric methane-hydrogen blends,
with pre-chamber being operated with slightly rich blends. Five operating and design
parameters were investigated with respect to their eff ects on ignition timing. Di fderent pre-chamber pressure (2, 4 and 6 bar), CVC chamber fuel blends (Fuel-A: 30%
methane + 70% hydrogen and Fuel-B: 50% methane + 50% hydrogen by volume), active radicals in pre-chamber combusted products (H, OH, O and NO), CVC chamber
temperature (298 K and 514 K) and pre-chamber traverse speed (0.983 m/s, 4.917
m/s and 13.112 m/s) are considered which span a range of fluid-dynamic mixing and
chemical time scales. Ignition delay of the fuel-air mixture in the CVC chamber is
investigated using a detailed mechanism with 21 species and 84 elementary reactions
(DRM19). To speed up the kinetic process adaptive mesh refi nement (AMR) based
on velocity and temperature and multi-zone reaction technique is used.
With 3D numerical simulations, the present work explains the e ffects of pre-chamber pressure, CVC chamber initial temperature and jet traverse speed on ignition for a speci fic set of fuels. An innovative post processing technique is developed
to predict and understand the characteristics of ignition in 3D space and time.
With the increase of pre-chamber pressure, ignition delay decreases for Fuel-A
which is the relatively more reactive fuel blend. For Fuel-B which is relatively less
reactive fuel blend, ignition occurs only for 2 bar pre-chamber pressure for centered
stationary jet. Inclusion of active radicals in pre-chamber combusted product decreases the ignition delay when compared with only the stable species in pre-chamber
combusted product. The eff ects of shock-flame interaction on heat release rate is observed by studying flame surface area and vorticity changes. In general, shock-flame
interaction increases heat release rate by increasing mixing (increase the amount of
deposited vorticity on flame surface) and flame stretching. The heat release rate is
found to be maximum just after fast-slow interaction.
For Fuel-A, increasing jet traverse speed decreases the ignition delay for relatively
higher pre-chamber pressures (6 and 4 bar). Only 6 bar pre-chamber pressure is
considered for Fuel-B with three di fferent pre-chamber traverse speeds. Fuel-B fails
to ignite within the simulation time for all the traverse speeds.
Higher initial CVC temperature (514 K) decreases the ignition delay for both fuels
when compared with relatively lower initial CVC temperature (300 K). For initial
temperature of 514 K, the ignition of Fuel-B is successful for all the pre-chamber
pressures with lowest ignition delay observed for the intermediate 4 bar pre-chamber
pressure. Fuel-A has the lowest ignition delay for 6 bar pre-chamber pressure.
A speci fic range of pre-chamber combusted products mass fraction, CVC chamber
fuel mass fraction and temperature are found at ignition point for Fuel-A which were
liable for ignition initiation. The behavior of less reactive Fuel-B appears to me more
complex at room temperature initial condition. No simple conclusions could be made
about the range of pre-chamber and CVC chamber mass fractions at ignition point.
|
45 |
A simple moving boundary technique and its application to supersonic inlet starting /Baig, Saood Saeed. January 2008 (has links)
No description available.
|
46 |
Modelling the Magnetic Influence of a Jet Aircraft : A study on the magnetic interference of an aircraft configuration and its effect on a magnetometer / Modellering av ett jetflygplans magnetiska påverkan : En studie av en flygplanskonfigurations magnetiska interferens och dess effekt på en magnetometerSandlund, Erik January 2019 (has links)
Aircraft have been used for the detection of submarines since World War II. The basic concept is to attach a sensor to the back of an aircraft. Since the aircraft is a moving metallic object, it is bound to generate a great deal of interference. Because of this, mathematical models and software have been developed to help filter out this interference and thus make the detection of the submarine easier. Normally, the engines of the aircraft are placed on the wings, quite far away from the sensor. However, for a maritime patrol system in development, the jet engines are placed at the rear of the airframe, generating the necessity to study whether or not they affect the performance of the sensor, which is the purpose of this thesis. Several models were created, tested and simulated for the airframe and jet engines. One of each of these were then combined to create a simulation model for the complete aircraft. A jet engine model that included rotating machinery -- a possible source of magnetic interference -- was also created, but could not be added to the model for the complete aircraft. The magnetic interference was mathematically compensated for, removing the static interference, but not the interference during manoeuvres. The jet engine part of the complete aircraft model did not seem to generate a significant amount of magnetic interference compared to the airframe. An electric dipole, representing a submarine, was then added to the simulation. The data from that simulation was put through the mathematical model and distortions of a few~nT were noticeable during straight courses. The jet engine model that included rotating machinery yielded different results compared to the jet engine model in the complete aircraft model. They seemed to contain signals of higher frequency, which were however not detected by a frequency domain study or present during straight courses. It was thus concluded that using this particular engine model the submarine could probably still be detected if the course of the aircraft was kept straight, though further research is needed with more advanced models for the engine, in particular with regards to the rotating machinery.
|
47 |
Design methodology of an axial-flow turbine for a micro jet engineBasson, Johan George Theron 12 1900 (has links)
Thesis (MScEng)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: The main components of a micro gas turbine engine are a centrifugal or mixed-flow compressor, a combustion chamber and a single stage axial-flow or radial-flow turbine. The goal of this thesis is to formulate a design methodology for small axial-flow turbines. This goal is pursued by developing five design-related capabilities and applying them to develop a turbine for an existing micro gas turbine engine. Firstly, a reverse engineering procedure for producing digital three-dimensional models of existing turbines is developed. Secondly, a procedure for generating candidate turbine designs from performance requirement information is presented. The third capability is to use independent analysis procedures to analyse the performance of a turbine design. The fourth capability is to perform structural analysis to investigate the behavior of a turbine design under static and dynamic loading. Lastly, a manufacturing process for prototypes of a feasible turbine design is developed. The reverse engineering procedure employs point cloud data from a coordinate measuring machine and a CT-scanner to generate a three-dimensional model of the turbine in an existing micro gas turbine engine. The design generation capability is used to design three new turbines to match the performance of the turbine in the existing micro gas turbine engine. Independent empirical and numerical turbine performance analysis procedures are developed. They are applied to the four turbine designs and, for the new turbine designs, the predicted efficiency values differ by less than 5% between the two procedures. A finite element analysis is used to show that the stresses in the roots of the turbine rotor blades are sufficiently low and that the dominant excitation frequencies do not approach any of the blade natural frequencies. Finally prototypes of the three new turbine designs are manufactured through an investment casting process. Patterns made of an organic wax-like material and a polystyrene material are used, with the former yielding superior results. / AFRIKAANSE OPSOMMING: Mikro-gasturbiene-enjins bestaan uit 'n sentrifugaal- of ‘n gemende-vloeikompressor, 'n verbrandingsruim en 'n enkel-stadium-aksiaalvloei- of ‘n radiaalvloei-turbine. Die doel van hierdie tesis is om 'n ontwerpsmetodologie vir klein aksiaalvloei-turbines saam te stel. Hierdie doel word deur die ontwikkeling en toepassing van vyf ontwerpsverwante vermoëns nagestreef. Eerstens word 'n tru-waartse-ingenieursproses ontwikkel om drie-dimensionele rekenaarmodelle van die bestaande turbines te skep. Tweedens word 'n metode om kandidaatturbineontwerpe vanaf werkverrigtingsvereistes te verkry, voorgestel. Die derde ontwerpsvermoë is om die werksverrigting van 'n turbineontwerp met onafhanklike analises te evalueer. Die vierde ontwerpsvermoë is om die struktuur van 'n turbinelem te analiseer sodat die effek van statiese en dinamiese belastings ondersoek kan word. Laastens word 'n vervaardigingsproses vir prototipes van geskikte turbineontwerpe ontwikkel. Die tru-waartse-ingenieursproses maak gebruik van 'n koördinaat-meet-masjien en 'n CT-skandeerder om puntewolkdata vanaf die turbine in 'n bestaande mikro-gasturbiene-enjin te verkry. Die data word dan gebruik om 'n drie-dimensionele model van die turbine te skep. Die ontwerpskeppingsvermoë word dan gebruik om drie kandidaatturbineontwerpe vir die bestaande mikro-gasturbiene-enjin te skep. Onafhanklike empiriese en numeriese prosedures om die werkverrigting van 'n turbineontwerp te analiseer word ontwikkel. Beide prosedures word op die vier turbineontwerpe toegepas. Daar word gevind dat die voorspelde benuttingsgraadwaardes van die nuwe ontwerpe met minder as 5% verskil vir die twee prosedures. 'n Eindige-element-analise word dan gebruik om te wys dat die spannings in die wortels van die turbinelemme laag genoeg is, asook dat die dominante opwekkingsfrekwensies nie die lem se natuurlike frekwensies nader nie. Laastens word prototipes van die drie nuwe turbineontwerpe deur 'n beleggingsgietproses vervaardig. In die vervaardigingproses word die effektiwiteit van twee materiale vir die gietpatrone getoets, naamlik 'n organiese wasagtige materiaal en 'n polistireen-materiaal. Daar word bevind dat die gebruik van die wasagtige gietpatrone tot beter resultate lei.
|
48 |
Premixed Turbulent Combustion Of Producer Gas In Closed Vessel And Engine CylinderYarasu, Ravindra Babu January 2009 (has links)
Producer gas derived from biomass is one of the most environment friendly substitutes to the fossil fuels. Usage of producer gas for power generation has effect of zero net addition of CO2 in atmosphere. The engines working on producer gas have potential to decrease the dependence on conventional fuels for power generation. However, the combustion process is governed by complex interactions between chemistry and fluid dynamics, some of which are not completely understood. Improved knowledge of combustion is, therefore, of vital importance for both direct use in the design of engines, and for the evolution of reliable simulation tools for engine development.
The present work is related to the turbulent combustion of producer gas in closed vessels and engine cylinders. The main objective of the work was multi-dimensional simulation of turbulent combustion in the bowl-in-piston engine operating on producer gas fuel and to observe the flame and flow field interaction. First, the combustion model was validated in constant volume combustion chamber with experimental results. Experimental turbulent combustion data of producer gas (composition matching with engine operating conditions) was presented. The required data of laminar burning velocity of producer gas was computed and used in the simulation of turbulent combustion in closed vessel. The effect of squish and reverse squish flow on flame propagation in the bowl-in-piston engine cylinder was described.
Laminar burning velocity of unstretched flame was computed using flame code which was developed earlier in this laboratory. One dimensional computations of unstretched planar flame were made to calculate laminar burning velocity of the producer gas-air mixture at pressures (1-10 bar) and temperatures (300-600 K). A correlation of laminar burning velocity of producer gas as a function of pressure and temperature was fitted and compared with experiments. A fixed composition and equivalence ratio of producer gas-air mixture, typical of the engine operating conditions, was considered. The correlation was used in simulation of turbulent combustion in closed vessel.
The turbulent combustion experiments with producer gas-air mixture were conducted in a closed vessel. The aim of experiments was to generate pressure-time data, in closed vessel during turbulent flame propagation, which was required to validate turbulent combustion models. Determination of (ST /SL) was made from pressure-time data which requires corresponding laminar combustion data with same initial conditions. For this purpose a set of laminar combustion experiments was conducted.
Experimental setup consists of a constant volume combustion chamber of cubical shape and size 80 x 80 x 80 mm3 . The initial mixtures pressure and temperature were 1 bar and 300 K respectively. A fixed composition and equivalence ratio of producer gas-air mixture, typical of the engine operating conditions, was used. The composition of producer gas was H2 -19.61%, CO2 -19.68%, CH4 -2.52%, CO2 -12.55% and N2 -45.64% on volume basis. Fuel-air mixture was ignited with electric spark at the center of the cube. Initial turbulence in the chamber was created by moving a perforated plate with specified velocity. Perforated plate was placed in chamber so that the central hole in the plate passes over the spark electrodes as it sweeps across the chamber. Two geometrically similar plates with hole diameter of 5 and 10 mm were used. The new experimental setup constructed as a part of this work was first tested with one set of experiments each with methane and propane data of SL and ST /SL from the literature.
Maximum turbulent intensity (u’) achieved was 1.092 ms−1 . The ratios of turbulent to laminar burning velocity (ST /SL) values were determined at six different turbulence intensity levels.
Laminar combustion experiments were extended to elevated initial pressures 2-5 bar and temperature 300 K. The value of SL was calculated from the pressure-time history recorded during laminar stretching flame propagation inside closed vessel. These SL values were compared with computed SL,∞ after accounting for stretch.
Turbulent combustion simulations were carried out to validate combustion models suitable for multi-dimensional CFD simulation of combustion in constant volume closed chamber. Two models proposed by Choi and Huh, based on Flame Surface Density (FSD) were tested with the present experimental results. User FORTRAN code for the source terms in transport equation of FSD was implemented in ANSYS-CFX 10.0 software. First model called CFM1, grossly under-predicted the rate of combustion. The second model called CFM2, predicted the results satisfactorily after replacing the arbitrary length scale with turbulent integral length scale (lt) having a limiting value near the wall. The modified CFM2 model was able to predict the propagation phase of the developed flame satisfactorily, though the duration for initial flame development was over-predicted by the model.
CFD simulation of producer gas engine combustion process was carried out using ANSYSCFX software. Mesh deformation option was used to take care of moving boundaries such as piston and valve surfaces. The fluid domain expands during suction process and contracts during compression process. In order to avoid excessive distortion of the mesh elements, a series of meshes at different crank angle positions were generated and checked for their quality during mesh motion in the solver. For suction process simulation, unstructured meshes having 0.1 to 0.3 million cells were used. During the compression and combustion process simulations, structured meshes having 40,000 to 0.1 million cells were used.
k-ε model was used for turbulence simulation. The suction, compression and combustion processes of an SI engine were simulated. Initial flame kernel was given by providing high flame surface density in a small volume comparable to the spark size at the time of ignition. The flame surface density model, CFM-2, was adapted with the modification of length scale tested against constant volume experiments. A suitable limiting value was used to avoid abnormal flame propagation near the wall. The limiting value of integral length scale (lt) near the wall was determined by linear extrapolation of the integral length scale in the domain to the wall. Engine p - θ curves of three different ignition timings 26°, 12° and 6°before top dead center (TDC) were simulated and compared with earlier experimental results. The effects of flow field on flame propagation have been observed.
A comparison of the simulated and experimental p - θ diagram of the engine for all above cases gave mixed results. For the ignition timing at 26° before TDC case, predicted peak pressure value was 17% higher and at 3° earlier than those of the experimental peak. For the other two cases, the predicted peak pressure value was 28% lower and 5° later than those of the experimental peak. The reason for under-prediction of the pressure values could be due to the delay in development of initial flame kernel. Simulated pressure curves have offset about 3-4° compared to the experimental pressure curves. It was observed that in all predicted p - θ cases, there was a delay in the initial flame development. It is evident from the under-prediction of pressure values, especially in the initial flame kernel development phase and it also affects the p - θ curve at later stage. The delay was about 3-4° of crank angle rotation in various cases.
The delay in predicting the initial flame development needs to be corrected in order to predict the combustion process properly. The proposed FSD model seems to have capability to predict p - θ values fairly in the propagation phase of developed flame. Reasonably good match was obtained by advancing the ignition timing in the computation by about 3-4° compared to the experimental setting.
In the bowl-in-piston engine cylinders, the flow in the cylinder is characterised by squish and reverse squish when the piston is moving towards and away from the top dead center (TDC) respectively. The effect of squish and reverse squish flow on flame propagation has been assessed. For the more advanced ignition case, i.e., 26° before TDC, The flame propagation did not have favorable effect by the flow field. The direction of flame propagation was against the squish and reverse squish flow. This resulted in suppressed peak velocities in the cylinder compared the motoring process. Hence the burning rate was not augmented by the turbulence inside the cylinder.
For the ignition 12° before TDC case, the flame propagation did have favorable effect by the flow field. During the reverse squish period, the flame had reached the bowl wall. At this stage, the flame was pushing the reactants out and this augments the reverse-squish flow, and hence the maximum reverse-squish velocity was increased to 2.03 times the peak reverse-squish velocity of motoring case. The reverse-squish flow was distorting the flame from spherical shape and the flame gets stretched. Flame surface enters the cylindrical region faster compared to the previous case. The stretched flame in the reverse-squish flow may be considered as reverse squish flame, as was proposed earlier by Sridhar G. The burn rate during the reverse squish period may be 2 to 2.5 times the normal burn rate.
For the ignition 6° before TDC case, the flame was very small in size and it did not affect the flow in squish period. During the reverse squish period, the flame radius was moderate compared to the bowl radius. The flame was pushing the reactants out and it increased the maximum reverse-squish velocity to 1.3 times by the flame. In this case, the reverse-squish flow moderately affecting the flame shapes. The results of this study could give an idea of what ignition timing must be kept for favorable use of flow field inside the engine cylinder.
Main contributions from the present work are: Multi-dimensional simulation of combustion process inside the engine cylinder operating on producer gas was carried out to examine flame/flow field interactions. Two models based on FSD were first tested against present experimental results in constant volume combustion chamber. In CFM2 model; a modification of replacing the arbitrary length scale by integral length scale with a limiting value near the wall was suggested to avoid prediction of abnormally large turbulent burning velocity near the wall. This combustion model has been implemented in ANSYS-CFX10. The required data of laminar and turbulent burning velocities of producer gas-air mixture has been determined by experiments and computations at varied initial pressures and turbulent intensities. Finally, the simulated engine pressure data has been compared with earlier experimental data of the engine operating on producer gas. The proposed FSD model has the capability to match well with the experimental results except for the initial flame kernel development phase. Even though this issue needs to be resolved, the work has brought out the important interaction between the flame propagation and flow field within the bowl-in-piston engine cylinder.
|
49 |
Numerical study of innovative scramjet inlets coupled to combustors using hydrocarbon-air mixtureMalo-Molina, Faure Joel 06 April 2010 (has links)
To advance the design of hypersonic vehicles, high-fidelity multi-physics CFD is used to characterize 3-D scramjet flow-fields in two novel streamline traced configurations. The two inlets, Jaws and Scoop, are analyzed and compared to a traditional rectangular inlet used as a baseline for on/off-design conditions. The flight trajectory conditions selected are Mach 6 and a dynamic pressure of 1,500 psf (71.82 kPa). Analysis of these hypersonic inlets is performed to investigate distortion effects downstream with multiple single cavity combustors acting as flame holders, and several fuel injection strategies. The best integrated scramjet inlet/combustor design is identified. The flow physics is investigated and the integrated performance impact of the two innovative scramjet inlet designs is quantified. Frozen and finite rate chemistry is simulated with 13 gaseous species and 20 reactions for an Ethylene/air finite-rate chemical model. In addition, URANS and LES modeling are compared to explore overall flow structure and to contrast individual numerical methods.
The flow distortion in Jaws and Scoop is similar to some of the distortion in the traditional rectangular inlet, despite design differences. The baseline and Jaws performance attributes are stronger than Scoop, but Jaws accomplishes this while eradicating the cowl lip interaction, and lessening the total drag and spillage penalties.
The innovative inlets work best on-design, whereas for off-design, the traditional inlet is best. Early pressure losses and flow distortions in the isolator aid the mixing of air and fuel, and improve the overall efficiency of the system. Although the trends observed with and without chemical reactions are similar, the former yields roughly 10% higher mixing efficiency and upstream reactions are present. These show a significant impact on downstream development. Unsteadiness in the combustor increases the mixing efficiency, varying the flame anchoring and combustion pressure effects upstream of the step.
|
50 |
Experimental And Theoretical Studies On Jet AcousticsPundarika, G 12 1900 (has links)
A systematic research on aeroacoustics conducted around the world for the last few decades has revealed various inherent characteristics of the jet noise radiation. However, a lot more needs to be done for the theoretical as well as experimental predictions of various jet noise features based on actual flow details. The work reported in the present thesis is an attempt in this direction.
A critical study of existing literature on jet noise shows that none of the general wave equations lends itself easily for predictions of all the jet noise features. It is shown that while LighthilPs classical acoustic analogy approach, with some reasonable approximations, can be used to yield most of the information needed by the engineers, the convected wave equations of Phillips and Lilley are required to study the acoustic radiation in what has come to be known as "Refraction valley" or "Cone of relative silence".
The characteristics of the sound field of underexpanded cold jet impingement flows were studied by measuring the noise emanating from two convergent nozzles of throat diameter 2.5 mm and 5 mm each and a convergent - divergent nozzle of exit diameter of 6.49 mm, when the jet impinges on a flat plate kept perpendicular to the direction of the jet. The measurements were conducted upstream of the nozzle over an extensive envelope of jet operating conditions such as chamber stagnation pressure, mass flow rate through the nozzle and diameter of the nozzle.
The source strength at the jet boundary was obtained by measuring acoustic pressure amplitude close to the jet contour assuming it as locally cylindrical. Particular attention was focussed on backward projection of the sound field on to a cylindrical surface. This is the application of acoustic holography to study the sound radiation in the audio frequency region. With the help of FFT and software developed for this purpose, the theoretical predictions using data from several cylindrical surfaces were compared.
A detailed analysis of noise radiation from a cold sonic and supersonic free jet was also carried out. The experimental work involved the measurement of noise field from a 2.5 mm, 5 mm convergent and a convergent - divergent nozzle of exit diameter of 6.49 mm and area ratio 1.687 for designed Mach number of two.
The experimental setup consisted essentially of a pressure chamber made of mild steel, designed to withstand 50 bar pressure. This chamber is a cylinder with dia 0.421 m and length 0.85 m. The nozzles were made of mild steel. Compressed air approximately at room temperature is supplied to the nozzle via a control valve.
The measuring and recording instruments consists of B & K Microphones, Preamplifiers, Conditioning amplifier and a Mediator, which measure a Sound Pressure Level at a point. The nozzles were operated at pressure ratio upto 25 bar. The noise signal was processed through 12 channel data acquisition system. Acoustic pressure and SPL were" calculated using theoretical relations and software developed. Using this software Fast Fourier Transformations of raw signal was obtained from 20 Hz to 20 kHz. Also constant SPL contour graphs were obtained.
Source strength distribution at the jet boundary has been obtained by the principle of acoustic holography. Experimental values are closely matching with the results obtained by acoustic holography. The percentage error for acoustic pressure and SPL were less than 12%. The experimental results were used to obtain the source distribution in terms of gross jet parameters.
|
Page generated in 0.0502 seconds