A material to function as a molecular electronic device should have a strong coupling with electrodes through appropriate and well-defined anchoring groups and have to support an effective traveling of charges via a conjugated molecular backbone. Oligo(3-hexylthiophene)s are π-conjugated molecules having large applicability in several areas of organic electronics owing interesting semiconducting properties and they also hold great promises in the field of single-molecule electronics. Polymerization methods, in principle, allow construction of long conjugated systems in a single synthetic step, however, most of them lack precision. This work uses externally initiated chain-growth Kumada Catalyst - Transfer Polycondensation (KCTP) for the synthesis of semiconductive oligo(3-hexylthiophene) wires with controllable molecular weights, low polydispersities, high regioregularities as well as with well-defined starting and end groups. In such a way, the synthetic efforts were compromised to obtain relatively easy a series of very complex molecular wires with a reasonable structural precision. To modulate the electronic function of oligomer backbones, specific charge-transfer moieties (DMA-TCBD and Fc-TCBD) were inserted as side chains or end groups. In-situ termination of KCTP with ZnCl-functionalized electron rich alkynes followed by Diederich-type click reaction resulted in the synthesis of asymmetrical oligo(3-hexylthiophene)s having thiolate-functionalized starting groups and donor-functionalized end-groups with a high degree of end-group functionalizations. Side chains of double-thiolate functionalized oligo(3-hexylthiophene)s, on the other hand, were further modified with the insertion of charge-transfer groups by post-polymerization functionalization. While the facile synthesis and modification of oligo(3-hexylthiophene)s enable the control over the molecular backbone, the specific starting and end anchoring groups allow the control over the electrode oligomer interface. To assure the formation of alligator clips between oligomer backbone and Au electrode, the optimizations including proper end-group conversion into mild counterparts followed by in-situ deprotection into thiolates and the binding abilities on gold were investigated. Finally, the conductance of bis-end functionalized oligo(3-hexylthiophene)s was preliminarily studied through oligomer backbone by Mechanically Controllable Break Junctions (MCBJs) setup and through oligomer-attached DNA origami-templated gold nanowires by individual electrical contacts. The developed KCTP-based synthetic route, at the end, presents new opportunities for the facile synthesis, the ease of modification and the feasibility of asymmetrical and side chain functionalized oligo(3-hexylthiophene) wires for needs of molecular electronics.

A material to function as a molecular electronic device should have a strong coupling with electrodes through appropriate and well-defined anchoring groups and have to support an effective traveling of charges via a conjugated molecular backbone. Oligo(3-hexylthiophene)s are π-conjugated molecules having large applicability in several areas of organic electronics owing interesting semiconducting properties and they also hold great promises in the field of single-molecule electronics. Polymerization methods, in principle, allow construction of long conjugated systems in a single synthetic step, however, most of them lack precision. This work uses externally initiated chain-growth Kumada Catalyst - Transfer Polycondensation (KCTP) for the synthesis of semiconductive oligo(3-hexylthiophene) wires with controllable molecular weights, low polydispersities, high regioregularities as well as with well-defined starting and end groups. In such a way, the synthetic efforts were compromised to obtain relatively easy a series of very complex molecular wires with a reasonable structural precision. To modulate the electronic function of oligomer backbones, specific charge-transfer moieties (DMA-TCBD and Fc-TCBD) were inserted as side chains or end groups. In-situ termination of KCTP with ZnCl-functionalized electron rich alkynes followed by Diederich-type click reaction resulted in the synthesis of asymmetrical oligo(3-hexylthiophene)s having thiolate-functionalized starting groups and donor-functionalized end-groups with a high degree of end-group functionalizations. Side chains of double-thiolate functionalized oligo(3-hexylthiophene)s, on the other hand, were further modified with the insertion of charge-transfer groups by post-polymerization functionalization. While the facile synthesis and modification of oligo(3-hexylthiophene)s enable the control over the molecular backbone, the specific starting and end anchoring groups allow the control over the electrode oligomer interface. To assure the formation of alligator clips between oligomer backbone and Au electrode, the optimizations including proper end-group conversion into mild counterparts followed by in-situ deprotection into thiolates and the binding abilities on gold were investigated. Finally, the conductance of bis-end functionalized oligo(3-hexylthiophene)s was preliminarily studied through oligomer backbone by Mechanically Controllable Break Junctions (MCBJs) setup and through oligomer-attached DNA origami-templated gold nanowires by individual electrical contacts. The developed KCTP-based synthetic route, at the end, presents new opportunities for the facile synthesis, the ease of modification and the feasibility of asymmetrical and side chain functionalized oligo(3-hexylthiophene) wires for needs of molecular electronics.

Inspiriert von den natürlich vorkommenden Antibiotika der Gramicidin Familie und ihrer d-(alt)-l Aminosäuresequenz, die es diesen Oligopeptiden ermöglicht, eine beta–helikale Sekundärstruktur einzunehmen, war das Hauptziel dieser Arbeit die Synthese und Charakterisierung von Peptiden und diversen Pseudopeptiden mit regulärer all-l und d-(alt)-l Sequenz und die Untersuchung des Einflusses dieser stereochemischen Variation auf die Strukturen und Eigenschaften dieser Verbindungen. Zusätzlich ergab der Austausch von Amid-Bindungen im Peptid-Rückgrat durch verschiedene Isostere diverse, teils einzigartige Pseudopeptid-Strukturen, wohingegen Verzweigung des linearen Peptid-Rückgrates zu sphärischen Molekülen führte. Alle Projekte zielten auf die Entwicklung und Synthese diskreter Oligomere für Strukturuntersuchungen, sowie auf die Einbindung der jeweiligen Strukturelemente in Polymere. Die Polymerization geeigneter Monomere zu Polymeren soll zu makro- und supramolekularen Nano-Objekten führen. Die divergent/konvergente Synthese einer Serie von Oligo-d-(alt)-l-lysinen zielte auf die Generierung hydrophiler, pH-sensitiver nanotubularer Strukturen. Schrittweiser Austausch von Amid-Bindungen des Peptid-Rückgrates durch Ester-(alt)-Urea-Einheiten führte zu all-l und d-(alt)-l Oligopseudoleucinen mit 50% und 0% Amid-Bindungs-Anteil. Design, Synthese und Polymerisation von AB-“Click”-Monomeren, basierend auf all-l and l-(alt)-d lysin Dipeptiden, ergaben hochmolekulare, Triazol-enthaltende Polypseudopeptide, deren Seitenketten mit Pyrenbuttersäure quantitativ postfunktionalisiert werden konnten. Die Einführung von Verzweigung in Glutamat-Peptide ergab chirale Dendrimere mit adressierbaren fokalen und periphären Funktionalitäten, sowie variabler Ladungsdichte. Design, Synthese und Polymerisation eines Glutamat basierenden AB2-“Click”-Monomers lieferte verwandte chirale hyperverzweigte Polypseudopeptide. / Inspired by the naturally occurring antibiotics of the Gramicidin family and their d-(alt)-l amino acid sequence, enabling these oligopeptides to adopt a beta–helical secondary structure, the work presented in this thesis targeted the syn-thesis and characterization of peptides and diverse pseudopeptides with regular all-l and d-(alt)-l sequences and the influence of this stereochemical variation on the compounds’ structures and properties. Further diversification of the struc-tures as obtained by replacing amide bonds in the peptide backbone with differ-ent isosteres, affording unique pseudopeptide structures. In addition spherical molecules were generated by introducing branching into the linear peptide scaf-fold. Throughout all projects, the aim was the design and synthesis of discrete oligomers for structural investigations and the incorporation of the respective structural elements into polymers via the polymerization of suitable monomers, in order to generate nanoscale macromolecular and supramolecular objects. The divergent/convergent synthesis of a series of oligo-d-(alt)-l-lysines targeted the generation of hydrophilic, pH-sensitive nanotubular structures. The stepwise replacement of peptide backbone amide bonds with ester-(alt)-urea moieties afforded all-l and d-(alt)-l oligopseudoleucines with 50% and 0% amide content. The design, synthesis, and polymerization of an AB-“Click”-monomer, based on all-l and l-(alt)-d lysine dipeptides afforded high molecular weight, triazole con-taining polypseudopeptides. Quantitative coupling to pyrene butyric acid afforded the respective side chain labeled polymers. The introduction of branching into glutamate peptides afforded fully chiral den-drimers with addressable focal and peripheral functionalities and variable charge density. The design, synthesis, and polymerization of a glutamate based AB2-“Click”-monomer led to related chiral hyperbranched polypseudopeptides.